Changeset 90782c36 in mainline for uspace/drv/nic/rtl8169/defs.h

Timestamp:

2014-05-21T19:36:59Z (11 years ago)

Author:

Agnieszka Tabaka <nufcia@…>

Branches:

lfn, master, serial, ticket/834-toolchain-update, topic/msim-upgrade, topic/simplify-dev-export

Children:

f1ac202

Parents:

fef725d

Message:

Work-in-progress driver skeleton, able to read MAC address from the card.

File:

• uspace/drv/nic/rtl8169/defs.h (modified) (3 diffs)

uspace/drv/nic/rtl8169/defs.h

@@ -87 +87 @@
         WAKEUP3LD = 0xa4, /**< Power Management Wakeup frame3 low dword, 8b */
         WAKEUP3HD = 0xac, /**< Power Management Wakeup frame3 high dword, 8b */
-        WAKEUP2LD = 0xb4, /**< Power Management Wakeup frame4 low dword, 8b */
-        WAKEUP2HD = 0xbc, /**< Power Management Wakeup frame4 high dword, 8b */
+        WAKEUP4LD = 0xb4, /**< Power Management Wakeup frame4 low dword, 8b */
+        WAKEUP4HD = 0xbc, /**< Power Management Wakeup frame4 high dword, 8b */
         CRC0 = 0xc4, /**< 16-bit CRC of wakeup frame 0, 2b */
         CRC1 = 0xc6, /**< 16-bit CRC of wakeup frame 1, 2b */
@@ -132 +132 @@
         CONFIG2_PCICLKF_SHIFT = 0,
         CONFIG2_PCICLKF_SIZE = 2
-}'
+};
 
 enum rtl8169_config3 {
@@ -240 +240 @@
         ANAR_10_FD = (1 << 6), /**< 10BASE_T full duplex */
         ANAR_10_HD = (1 << 5), /**< 10BASE_T half duplex */
-        ANAR_SELECTOR = 0x1. /**< Selector */
+        ANAR_SELECTOR = 0x1, /**< Selector */
+};
+
+enum rtl8169_phystatus {
+        PHYSTATUS_TBIEN = (1 << 7), /**< TBI enabled */
+        PHYSTATUS_TXFLOW = (1 << 6), /**< TX flow control enabled */
+        PHYSTATUS_RXFLOW = (1 << 5), /**< RX flow control enabled */
+        PHYSTATUS_1000M = (1 << 4), /**< Link speed is 1000Mbit/s */
+        PHYSTATUS_100M = (1 << 3), /**< Link speed is 100Mbit/s */
+        PHYSTATUS_10M = (1 << 2), /**< Link speed is 10Mbit/s */
+        PHYSTATUS_LINK = (1 << 1), /**< Link up */
+        PHYSTATUS_FDX = (1 << 0), /**< Link is full duplex */
 };