source: mainline/uspace/srv/hw/irc/obio/obio.c@ 7f766f4

/*
 * Copyright (c) 2009 Jakub Jermar
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * - Redistributions of source code must retain the above copyright
 *   notice, this list of conditions and the following disclaimer.
 * - Redistributions in binary form must reproduce the above copyright
 *   notice, this list of conditions and the following disclaimer in the
 *   documentation and/or other materials provided with the distribution.
 * - The name of the author may not be used to endorse or promote products
 *   derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/** @addtogroup obio
 * @{
 */

/**
 * @file obio.c
 * @brief OBIO driver.
 *
 * OBIO is a short for on-board I/O. On UltraSPARC IIi and systems with U2P,
 * there is a piece of the root PCI bus controller address space, which
 * contains interrupt mapping and clear registers for all on-board devices.
 * Although UltraSPARC IIi and U2P are different in general, these registers can
 * be found at the same addresses.
 */

#include <ipc/services.h>
#include <ipc/irc.h>
#include <ns.h>
#include <as.h>
#include <ddi.h>
#include <align.h>
#include <stdbool.h>
#include <errno.h>
#include <async.h>
#include <align.h>
#include <async.h>
#include <stdio.h>
#include <ipc/loc.h>

#define NAME "obio"

#define OBIO_SIZE       0x1898  

#define OBIO_IMR_BASE   0x200
#define OBIO_IMR(ino)   (OBIO_IMR_BASE + ((ino) & INO_MASK))

#define OBIO_CIR_BASE   0x300
#define OBIO_CIR(ino)   (OBIO_CIR_BASE + ((ino) & INO_MASK))

#define INO_MASK        0x1f

static uintptr_t base_phys;
static volatile uint64_t *base_virt = (volatile uint64_t *) AS_AREA_ANY;

/** Handle one connection to obio.
 *
 * @param iid           Hash of the request that opened the connection.
 * @param icall         Call data of the request that opened the connection.
 * @param arg           Local argument.
 */
static void obio_connection(ipc_callid_t iid, ipc_call_t *icall, void *arg)
{
        ipc_callid_t callid;
        ipc_call_t call;

        /*
         * Answer the first IPC_M_CONNECT_ME_TO call.
         */
        async_answer_0(iid, EOK);

        while (1) {
                int inr;
        
                callid = async_get_call(&call);
                switch (IPC_GET_IMETHOD(call)) {
                case IRC_ENABLE_INTERRUPT:
                        inr = IPC_GET_ARG1(call);
                        base_virt[OBIO_IMR(inr & INO_MASK)] |= (1UL << 31);
                        async_answer_0(callid, EOK);
                        break;
                case IRC_CLEAR_INTERRUPT:
                        inr = IPC_GET_ARG1(call);
                        base_virt[OBIO_CIR(inr & INO_MASK)] = 0;
                        async_answer_0(callid, EOK);
                        break;
                default:
                        async_answer_0(callid, EINVAL);
                        break;
                }
        }
}

/** Initialize the OBIO driver.
 *
 * In the future, the OBIO driver should be integrated with the sun4u platform driver.
 */
static bool obio_init(void)
{
        base_phys = (uintptr_t) 0x1fe00000000ULL;
        
        int flags = AS_AREA_READ | AS_AREA_WRITE;
        int retval = physmem_map(base_phys,
            ALIGN_UP(OBIO_SIZE, PAGE_SIZE) >> PAGE_WIDTH, flags,
            (void *) &base_virt);
        
        if (retval < 0) {
                printf("%s: Error mapping OBIO registers\n", NAME);
                return false;
        }
        
        printf("%s: OBIO registers with base at %lx\n", NAME, base_phys);
        
        async_set_fallback_port_handler(obio_connection, NULL);
        service_register(SERVICE_IRC);
        
        return true;
}

int main(int argc, char **argv)
{
        printf("%s: HelenOS OBIO driver\n", NAME);
        
        if (!obio_init())
                return -1;
        
        printf("%s: Accepting connections\n", NAME);
        task_retval(0);
        async_manager();
        
        /* Never reached */
        return 0;
}

/**
 * @}
 */