source: mainline/uspace/lib/c/generic/device/hw_res.c@ a35b458

lfn serial ticket/834-toolchain-update topic/msim-upgrade topic/simplify-dev-export
Last change on this file since a35b458 was a35b458, checked in by Jiří Zárevúcky <zarevucky.jiri@…>, 8 years ago

style: Remove trailing whitespace on _all_ lines, including empty ones, for particular file types.

Command used: tools/srepl '\s\+$' '' -- *.c *.h *.py *.sh *.s *.S *.ag

Currently, whitespace on empty lines is very inconsistent.
There are two basic choices: Either remove the whitespace, or keep empty lines
indented to the level of surrounding code. The former is AFAICT more common,
and also much easier to do automatically.

Alternatively, we could write script for automatic indentation, and use that
instead. However, if such a script exists, it's possible to use the indented
style locally, by having the editor apply relevant conversions on load/save,
without affecting remote repository. IMO, it makes more sense to adopt
the simpler rule.

  • Property mode set to 100644
File size: 4.4 KB
Line 
1/*
2 * Copyright (c) 2010 Lenka Trochtova
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 *
9 * - Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * - Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * - The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 */
28
29 /** @addtogroup libc
30 * @{
31 */
32/** @file
33 */
34
35#include <device/hw_res.h>
36#include <errno.h>
37#include <async.h>
38#include <stdlib.h>
39
40errno_t hw_res_get_resource_list(async_sess_t *sess,
41 hw_resource_list_t *hw_resources)
42{
43 sysarg_t count = 0;
44
45 async_exch_t *exch = async_exchange_begin(sess);
46
47 errno_t rc = async_req_1_1(exch, DEV_IFACE_ID(HW_RES_DEV_IFACE),
48 HW_RES_GET_RESOURCE_LIST, &count);
49
50 if (rc != EOK) {
51 async_exchange_end(exch);
52 return rc;
53 }
54
55 size_t size = count * sizeof(hw_resource_t);
56 hw_resource_t *resources = (hw_resource_t *) malloc(size);
57 if (resources == NULL) {
58 // FIXME: This is protocol violation
59 async_exchange_end(exch);
60 return ENOMEM;
61 }
62
63 rc = async_data_read_start(exch, resources, size);
64 async_exchange_end(exch);
65
66 if (rc != EOK) {
67 free(resources);
68 return rc;
69 }
70
71 hw_resources->resources = resources;
72 hw_resources->count = count;
73
74 return EOK;
75}
76
77errno_t hw_res_enable_interrupt(async_sess_t *sess, int irq)
78{
79 async_exch_t *exch = async_exchange_begin(sess);
80
81 errno_t rc = async_req_2_0(exch, DEV_IFACE_ID(HW_RES_DEV_IFACE),
82 HW_RES_ENABLE_INTERRUPT, irq);
83 async_exchange_end(exch);
84
85 return rc;
86}
87
88errno_t hw_res_disable_interrupt(async_sess_t *sess, int irq)
89{
90 async_exch_t *exch = async_exchange_begin(sess);
91
92 errno_t rc = async_req_2_0(exch, DEV_IFACE_ID(HW_RES_DEV_IFACE),
93 HW_RES_DISABLE_INTERRUPT, irq);
94 async_exchange_end(exch);
95
96 return rc;
97}
98
99errno_t hw_res_clear_interrupt(async_sess_t *sess, int irq)
100{
101 async_exch_t *exch = async_exchange_begin(sess);
102
103 errno_t rc = async_req_2_0(exch, DEV_IFACE_ID(HW_RES_DEV_IFACE),
104 HW_RES_CLEAR_INTERRUPT, irq);
105 async_exchange_end(exch);
106
107 return rc;
108}
109
110/** Setup DMA channel to specified place and mode.
111 *
112 * @param channel DMA channel.
113 * @param pa Physical address of the buffer.
114 * @param size DMA buffer size.
115 * @param mode Mode of the DMA channel:
116 * - Read or Write
117 * - Allow automatic reset
118 * - Use address decrement instead of increment
119 * - Use SINGLE/BLOCK/ON DEMAND transfer mode
120 *
121 * @return Error code.
122 *
123 */
124errno_t hw_res_dma_channel_setup(async_sess_t *sess,
125 unsigned channel, uint32_t pa, uint32_t size, uint8_t mode)
126{
127 async_exch_t *exch = async_exchange_begin(sess);
128
129 const uint32_t packed = (channel & 0xffff) | (mode << 16);
130 const errno_t ret = async_req_4_0(exch, DEV_IFACE_ID(HW_RES_DEV_IFACE),
131 HW_RES_DMA_CHANNEL_SETUP, packed, pa, size);
132
133 async_exchange_end(exch);
134
135 return ret;
136}
137
138/** Query remaining bytes in the buffer.
139 *
140 * @param channel DMA channel.
141 *
142 * @param[out] rem Number of bytes remaining in the buffer if positive.
143 *
144 * @return Error code.
145 *
146 */
147errno_t hw_res_dma_channel_remain(async_sess_t *sess, unsigned channel, size_t *rem)
148{
149 async_exch_t *exch = async_exchange_begin(sess);
150
151 sysarg_t remain;
152 const errno_t ret = async_req_2_1(exch, DEV_IFACE_ID(HW_RES_DEV_IFACE),
153 HW_RES_DMA_CHANNEL_REMAIN, channel, &remain);
154
155 async_exchange_end(exch);
156
157 if (ret == EOK)
158 *rem = remain;
159
160 return ret;
161}
162
163/** @}
164 */
Note: See TracBrowser for help on using the repository browser.