source: mainline/uspace/drv/bus/usb/xhci/endpoint.c@ 9905da7

/*
 * Copyright (c) 2018 Petr Manek, Ondrej Hlavaty, Michal Staruch, Jan Hrach
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * - Redistributions of source code must retain the above copyright
 *   notice, this list of conditions and the following disclaimer.
 * - Redistributions in binary form must reproduce the above copyright
 *   notice, this list of conditions and the following disclaimer in the
 *   documentation and/or other materials provided with the distribution.
 * - The name of the author may not be used to endorse or promote products
 *   derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/** @addtogroup drvusbxhci
 * @{
 */
/** @file
 * @brief The host controller endpoint management.
 */

#include <usb/host/endpoint.h>
#include <usb/descriptor.h>

#include <errno.h>
#include <macros.h>
#include <str_error.h>

#include "hc.h"
#include "bus.h"
#include "commands.h"
#include "device.h"
#include "endpoint.h"
#include "streams.h"

static errno_t alloc_transfer_ds(xhci_endpoint_t *);

/**
 * Initialize new XHCI endpoint.
 * @param[in] xhci_ep Allocated XHCI endpoint to initialize.
 * @param[in] dev Device, to which the endpoint belongs.
 * @param[in] desc USB endpoint descriptor carrying configuration data.
 *
 * @return Error code.
 */
static errno_t xhci_endpoint_init(xhci_endpoint_t *xhci_ep, device_t *dev,
    const usb_endpoint_descriptors_t *desc)
{
        errno_t rc;
        assert(xhci_ep);

        endpoint_t *ep = &xhci_ep->base;

        endpoint_init(ep, dev, desc);

        fibril_mutex_initialize(&xhci_ep->guard);

        xhci_ep->max_burst = desc->companion.max_burst + 1;

        if (ep->transfer_type == USB_TRANSFER_BULK)
                xhci_ep->max_streams = 1 << (USB_SSC_MAX_STREAMS(desc->companion));
        else
                xhci_ep->max_streams = 1;

        if (ep->transfer_type == USB_TRANSFER_ISOCHRONOUS)
                xhci_ep->mult = USB_SSC_MULT(desc->companion) + 1;
        else
                xhci_ep->mult = 1;

        /*
         * In USB 3, the semantics of wMaxPacketSize changed. Now the number of
         * packets per service interval is determined from max_burst and mult.
         */
        if (dev->speed >= USB_SPEED_SUPER) {
                ep->packets_per_uframe = xhci_ep->max_burst * xhci_ep->mult;
                if (ep->transfer_type == USB_TRANSFER_ISOCHRONOUS ||
                    ep->transfer_type == USB_TRANSFER_INTERRUPT) {
                        ep->max_transfer_size = ep->max_packet_size * ep->packets_per_uframe;
                }
        }

        xhci_ep->interval = desc->endpoint.poll_interval;

        /*
         * Only Low/Full speed interrupt endpoints have interval as a linear field,
         * others have 2-based log of it.
         */
        if (dev->speed >= USB_SPEED_HIGH ||
            ep->transfer_type != USB_TRANSFER_INTERRUPT) {

                // XXX: According to the spec, the interval should be
                //      from [1, 16]. However, in QEMU, we get 0 here
                //      (a QEMU bug?).
                if (xhci_ep->interval == 0)
                        xhci_ep->interval = 8;

                xhci_ep->interval = 1 << (xhci_ep->interval - 1);
        }

        /* Full speed devices have interval in frames */
        if (dev->speed <= USB_SPEED_FULL) {
                xhci_ep->interval *= 8;
        }

        if (xhci_ep->base.transfer_type == USB_TRANSFER_ISOCHRONOUS)
                isoch_init(xhci_ep, desc);

        if ((rc = alloc_transfer_ds(xhci_ep)))
                goto err;

        unsigned flags = -1U;

        /* Some xHCs can handle 64-bit addresses */
        xhci_bus_t *bus = bus_to_xhci_bus(ep->device->bus);
        if (bus->hc->ac64)
                flags &= ~DMA_POLICY_4GiB;

        /* xHCI works best if it can fit 65k transfers in one TRB */
        ep->transfer_buffer_policy = dma_policy_create(flags, 1 << 16);

        /* But actualy can do full scatter-gather. */
        ep->required_transfer_buffer_policy = dma_policy_create(flags, PAGE_SIZE);

        return EOK;

err:
        return rc;
}

/**
 * Create a new xHCI endpoint structure.
 *
 * Bus callback.
 */
endpoint_t *xhci_endpoint_create(device_t *dev,
    const usb_endpoint_descriptors_t *desc)
{
        const usb_transfer_type_t type = USB_ED_GET_TRANSFER_TYPE(desc->endpoint);

        xhci_endpoint_t *ep = calloc(1, sizeof(xhci_endpoint_t) +
            (type == USB_TRANSFER_ISOCHRONOUS) * sizeof(*ep->isoch));
        if (!ep)
                return NULL;

        if (xhci_endpoint_init(ep, dev, desc)) {
                free(ep);
                return NULL;
        }

        return &ep->base;
}

/**
 * Finalize XHCI endpoint.
 * @param[in] xhci_ep XHCI endpoint to finalize.
 */
static void xhci_endpoint_fini(xhci_endpoint_t *xhci_ep)
{
        assert(xhci_ep);

        xhci_endpoint_free_transfer_ds(xhci_ep);

        // TODO: Something missed?
}

/**
 * Destroy given xHCI endpoint structure.
 *
 * Bus callback.
 */
void xhci_endpoint_destroy(endpoint_t *ep)
{
        xhci_endpoint_t *xhci_ep = xhci_endpoint_get(ep);

        xhci_endpoint_fini(xhci_ep);
        free(xhci_ep);
}


/**
 * Register an andpoint to the xHC.
 *
 * Bus callback.
 */
errno_t xhci_endpoint_register(endpoint_t *ep_base)
{
        errno_t err;
        xhci_endpoint_t *ep = xhci_endpoint_get(ep_base);

        if (ep_base->endpoint != 0 && (err = hc_add_endpoint(ep)))
                return err;

        endpoint_set_online(ep_base, &ep->guard);
        return EOK;
}

/**
 * Abort a transfer on an endpoint.
 */
static void endpoint_abort(endpoint_t *ep)
{
        xhci_device_t *dev = xhci_device_get(ep->device);
        xhci_endpoint_t *xhci_ep = xhci_endpoint_get(ep);

        /* This function can only abort endpoints without streams. */
        assert(xhci_ep->primary_stream_data_array == NULL);

        fibril_mutex_lock(&xhci_ep->guard);

        endpoint_set_offline_locked(ep);

        if (!ep->active_batch) {
                fibril_mutex_unlock(&xhci_ep->guard);
                return;
        }

        /* First, offer the batch a short chance to be finished. */
        endpoint_wait_timeout_locked(ep, 10000);

        if (!ep->active_batch) {
                fibril_mutex_unlock(&xhci_ep->guard);
                return;
        }

        usb_transfer_batch_t *const batch = ep->active_batch;

        const errno_t err = hc_stop_endpoint(xhci_ep);
        if (err) {
                usb_log_error("Failed to stop endpoint %u of device "
                    XHCI_DEV_FMT ": %s", ep->endpoint, XHCI_DEV_ARGS(*dev),
                    str_error(err));
        }

        fibril_mutex_unlock(&xhci_ep->guard);

        batch->error = EINTR;
        batch->transferred_size = 0;
        usb_transfer_batch_finish(batch);
        return;
}

/**
 * Unregister an endpoint. If the device is still available, inform the xHC
 * about it.
 *
 * Bus callback.
 */
void xhci_endpoint_unregister(endpoint_t *ep_base)
{
        errno_t err;
        xhci_endpoint_t *ep = xhci_endpoint_get(ep_base);
        xhci_device_t *dev = xhci_device_get(ep_base->device);

        endpoint_abort(ep_base);

        /* If device slot is still available, drop the endpoint. */
        if (ep_base->endpoint != 0 && dev->slot_id) {

                if ((err = hc_drop_endpoint(ep))) {
                        usb_log_error("Failed to drop endpoint " XHCI_EP_FMT ": %s",
                            XHCI_EP_ARGS(*ep), str_error(err));
                }
        } else {
                usb_log_debug("Not going to drop endpoint " XHCI_EP_FMT " because"
                    " the slot has already been disabled.", XHCI_EP_ARGS(*ep));
        }
}

/**
 * Determine the type of a XHCI endpoint.
 * @param[in] ep XHCI endpoint to query.
 *
 * @return EP_TYPE_[CONTROL|ISOCH|BULK|INTERRUPT]_[IN|OUT]
 */
int xhci_endpoint_type(xhci_endpoint_t *ep)
{
        const bool in = ep->base.direction == USB_DIRECTION_IN;

        switch (ep->base.transfer_type) {
        case USB_TRANSFER_CONTROL:
                return EP_TYPE_CONTROL;

        case USB_TRANSFER_ISOCHRONOUS:
                return in ? EP_TYPE_ISOCH_IN :
                    EP_TYPE_ISOCH_OUT;

        case USB_TRANSFER_BULK:
                return in ? EP_TYPE_BULK_IN :
                    EP_TYPE_BULK_OUT;

        case USB_TRANSFER_INTERRUPT:
                return in ? EP_TYPE_INTERRUPT_IN :
                    EP_TYPE_INTERRUPT_OUT;
        }

        return EP_TYPE_INVALID;
}

/**
 * Allocate transfer data structures for XHCI endpoint not using streams.
 * @param[in] xhci_ep XHCI endpoint to allocate data structures for.
 *
 * @return Error code.
 */
static errno_t alloc_transfer_ds(xhci_endpoint_t *xhci_ep)
{
        /* Can't use XHCI_EP_FMT because the endpoint may not have device. */
        usb_log_debug("Allocating main transfer ring for endpoint " XHCI_EP_FMT,
            XHCI_EP_ARGS(*xhci_ep));

        xhci_ep->primary_stream_data_array = NULL;
        xhci_ep->primary_stream_data_size = 0;

        errno_t err;
        if ((err = xhci_trb_ring_init(&xhci_ep->ring, 0))) {
                return err;
        }

        if (xhci_ep->base.transfer_type == USB_TRANSFER_ISOCHRONOUS) {
                if ((err = isoch_alloc_transfers(xhci_ep))) {
                        xhci_trb_ring_fini(&xhci_ep->ring);
                        return err;
                }
        }

        return EOK;
}

/**
 * Free transfer data structures for XHCI endpoint.
 * @param[in] xhci_ep XHCI endpoint to free data structures for.
 */
void xhci_endpoint_free_transfer_ds(xhci_endpoint_t *xhci_ep)
{
        if (xhci_ep->primary_stream_data_size) {
                xhci_stream_free_ds(xhci_ep);
        } else {
                usb_log_debug("Freeing main transfer ring of endpoint " XHCI_EP_FMT,
                    XHCI_EP_ARGS(*xhci_ep));
                xhci_trb_ring_fini(&xhci_ep->ring);
        }

        if (xhci_ep->base.transfer_type == USB_TRANSFER_ISOCHRONOUS)
                isoch_fini(xhci_ep);
}

xhci_trb_ring_t *xhci_endpoint_get_ring(xhci_endpoint_t *ep, uint32_t stream_id)
{
        if (ep->primary_stream_data_size == 0)
                return stream_id == 0 ? &ep->ring : NULL;

        xhci_stream_data_t *stream_data = xhci_get_stream_ctx_data(ep, stream_id);
        if (stream_data == NULL) {
                usb_log_warning("No transfer ring was found for stream %u.", stream_id);
                return NULL;
        }

        return &stream_data->ring;
}

/**
 * Configure endpoint context of a control endpoint.
 * @param[in] ep XHCI control endpoint.
 * @param[in] ctx Endpoint context to configure.
 */
static void setup_control_ep_ctx(xhci_endpoint_t *ep, xhci_ep_ctx_t *ctx)
{
        XHCI_EP_TYPE_SET(*ctx, xhci_endpoint_type(ep));
        XHCI_EP_MAX_PACKET_SIZE_SET(*ctx, ep->base.max_packet_size);
        XHCI_EP_MAX_BURST_SIZE_SET(*ctx, ep->max_burst - 1);
        XHCI_EP_MULT_SET(*ctx, ep->mult - 1);
        XHCI_EP_ERROR_COUNT_SET(*ctx, 3);
        XHCI_EP_TR_DPTR_SET(*ctx, ep->ring.dequeue);
        XHCI_EP_DCS_SET(*ctx, 1);
}

/**
 * Configure endpoint context of a bulk endpoint.
 * @param[in] ep XHCI bulk endpoint.
 * @param[in] ctx Endpoint context to configure.
 */
static void setup_bulk_ep_ctx(xhci_endpoint_t *ep, xhci_ep_ctx_t *ctx)
{
        XHCI_EP_TYPE_SET(*ctx, xhci_endpoint_type(ep));
        XHCI_EP_MAX_PACKET_SIZE_SET(*ctx, ep->base.max_packet_size);
        XHCI_EP_MAX_BURST_SIZE_SET(*ctx, ep->max_burst - 1);
        XHCI_EP_ERROR_COUNT_SET(*ctx, 3);

        XHCI_EP_MAX_P_STREAMS_SET(*ctx, 0);
        XHCI_EP_TR_DPTR_SET(*ctx, ep->ring.dequeue);
        XHCI_EP_DCS_SET(*ctx, 1);
}

/**
 * Configure endpoint context of a isochronous endpoint.
 * @param[in] ep XHCI isochronous endpoint.
 * @param[in] ctx Endpoint context to configure.
 */
static void setup_isoch_ep_ctx(xhci_endpoint_t *ep, xhci_ep_ctx_t *ctx)
{
        XHCI_EP_TYPE_SET(*ctx, xhci_endpoint_type(ep));
        XHCI_EP_MAX_PACKET_SIZE_SET(*ctx, ep->base.max_packet_size & 0x07FF);
        XHCI_EP_MAX_BURST_SIZE_SET(*ctx, ep->max_burst - 1);
        XHCI_EP_MULT_SET(*ctx, ep->mult - 1);
        XHCI_EP_ERROR_COUNT_SET(*ctx, 0);
        XHCI_EP_TR_DPTR_SET(*ctx, ep->ring.dequeue);
        XHCI_EP_DCS_SET(*ctx, 1);
        XHCI_EP_INTERVAL_SET(*ctx, fnzb32(ep->interval) % 32);

        XHCI_EP_MAX_ESIT_PAYLOAD_LO_SET(*ctx, ep->isoch->max_size & 0xFFFF);
        XHCI_EP_MAX_ESIT_PAYLOAD_HI_SET(*ctx, (ep->isoch->max_size >> 16) & 0xFF);
}

/**
 * Configure endpoint context of a interrupt endpoint.
 * @param[in] ep XHCI interrupt endpoint.
 * @param[in] ctx Endpoint context to configure.
 */
static void setup_interrupt_ep_ctx(xhci_endpoint_t *ep, xhci_ep_ctx_t *ctx)
{
        XHCI_EP_TYPE_SET(*ctx, xhci_endpoint_type(ep));
        XHCI_EP_MAX_PACKET_SIZE_SET(*ctx, ep->base.max_packet_size & 0x07FF);
        XHCI_EP_MAX_BURST_SIZE_SET(*ctx, ep->max_burst - 1);
        XHCI_EP_MULT_SET(*ctx, 0);
        XHCI_EP_ERROR_COUNT_SET(*ctx, 3);
        XHCI_EP_TR_DPTR_SET(*ctx, ep->ring.dequeue);
        XHCI_EP_DCS_SET(*ctx, 1);
        XHCI_EP_INTERVAL_SET(*ctx, fnzb32(ep->interval) % 32);
        // TODO: max ESIT payload
}

/** Type of endpoint context configuration function. */
typedef void (*setup_ep_ctx_helper)(xhci_endpoint_t *, xhci_ep_ctx_t *);

/**
 * Static array, which maps USB endpoint types to their respective endpoint
 * context configuration functions.
 */
static const setup_ep_ctx_helper setup_ep_ctx_helpers[] = {
        [USB_TRANSFER_CONTROL] = setup_control_ep_ctx,
        [USB_TRANSFER_ISOCHRONOUS] = setup_isoch_ep_ctx,
        [USB_TRANSFER_BULK] = setup_bulk_ep_ctx,
        [USB_TRANSFER_INTERRUPT] = setup_interrupt_ep_ctx,
};

/** Configure endpoint context of XHCI endpoint.
 * @param[in] ep Associated XHCI endpoint.
 * @param[in] ep_ctx Endpoint context to configure.
 */
void xhci_setup_endpoint_context(xhci_endpoint_t *ep, xhci_ep_ctx_t *ep_ctx)
{
        assert(ep);
        assert(ep_ctx);

        usb_transfer_type_t tt = ep->base.transfer_type;

        memset(ep_ctx, 0, sizeof(*ep_ctx));
        setup_ep_ctx_helpers[tt](ep, ep_ctx);
}

/**
 * Clear endpoint halt condition by resetting the endpoint and skipping the
 * offending transfer.
 */
errno_t xhci_endpoint_clear_halt(xhci_endpoint_t *ep, uint32_t stream_id)
{
        errno_t err;

        if ((err = hc_reset_endpoint(ep)))
                return err;

        if ((err = hc_reset_ring(ep, stream_id)))
                return err;

        return EOK;
}

/**
 * @}
 */