source: mainline/kernel/arch/sparc64/src/start.S@ 6767c1d

#
# Copyright (C) 2005 Jakub Jermar
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# - Redistributions of source code must retain the above copyright
#   notice, this list of conditions and the following disclaimer.
# - Redistributions in binary form must reproduce the above copyright
#   notice, this list of conditions and the following disclaimer in the
#   documentation and/or other materials provided with the distribution.
# - The name of the author may not be used to endorse or promote products
#   derived from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#

#include <arch/regdef.h>
#include <arch/boot/boot.h>

#include <arch/mm/mmu.h>
#include <arch/mm/tlb.h>
#include <arch/mm/tte.h>

.register %g2, #scratch
.register %g3, #scratch

.section K_TEXT_START, "ax"

/*
 * Here is where the kernel is passed control
 * from the boot loader.
 * 
 * The registers are expected to be in this state:
 * - %o0 bootinfo structure address
 * - %o1 bootinfo structure size
 *
 * Moreover, we depend on boot having established the
 * following environment:
 * - TLBs are on
 * - identity mapping for the kernel image
 * - identity mapping for memory stack
 */

.global kernel_image_start
kernel_image_start:

        /*
         * Setup basic runtime environment.
         */

        flushw                          ! flush all but the active register window
        wrpr %g0, 0, %tl                ! TL = 0, primary context register is used

        ! Disable interrupts and disable 32-bit address masking.
        rdpr %pstate, %g1
        and %g1, ~(PSTATE_AM_BIT|PSTATE_IE_BIT), %g1
        wrpr %g1, 0, %pstate

        wrpr %g0, 0, %pil               ! intialize %pil

        /*
         * Copy the bootinfo structure passed from the boot loader
         * to the kernel bootinfo structure.
         */
        mov %o1, %o2
        mov %o0, %o1
        set bootinfo, %o0
        call memcpy
        nop

        /*
         * Switch to kernel trap table.
         */
        set trap_table, %g1
        wrpr %g1, 0, %tba

        /* 
         * Take over the DMMU by installing global locked
         * TTE entry identically mapping the first 4M
         * of memory.
         *
         * In case of DMMU, no FLUSH instructions need to be
         * issued. Because of that, the old DTLB contents can
         * be demapped pretty straightforwardly and without
         * causing any traps.
         */

        wr %g0, ASI_DMMU, %asi

#define SET_TLB_DEMAP_CMD(r1, context_id) \
        set (TLB_DEMAP_CONTEXT<<TLB_DEMAP_TYPE_SHIFT) | (context_id<<TLB_DEMAP_CONTEXT_SHIFT), %r1
        
        ! demap context 0
        SET_TLB_DEMAP_CMD(g1, TLB_DEMAP_NUCLEUS)
        stxa %g0, [%g1] ASI_DMMU_DEMAP                  
        membar #Sync

#define SET_TLB_TAG(r1, context) \
        set VMA | (context<<TLB_TAG_ACCESS_CONTEXT_SHIFT), %r1

        ! write DTLB tag
        SET_TLB_TAG(g1, MEM_CONTEXT_KERNEL)
        stxa %g1, [VA_DMMU_TAG_ACCESS] %asi                     
        membar #Sync

#define SET_TLB_DATA(r1, r2, imm) \
        set TTE_L | TTE_CP | TTE_P | TTE_W | LMA | imm, %r1; \
        set PAGESIZE_4M, %r2; \
        sllx %r2, TTE_SIZE_SHIFT, %r2; \
        or %r1, %r2, %r1; \
        set 1, %r2; \
        sllx %r2, TTE_V_SHIFT, %r2; \
        or %r1, %r2, %r1;
        
        ! write DTLB data and install the kernel mapping
        SET_TLB_DATA(g1, g2, TTE_G)
        stxa %g1, [%g0] ASI_DTLB_DATA_IN_REG            
        membar #Sync
        
        /*
         * Now is time to take over the IMMU.
         * Unfortunatelly, it cannot be done as easily as the DMMU,
         * because the IMMU is mapping the code it executes.
         *
         * [ Note that brave experiments with disabling the IMMU
         * and using the DMMU approach failed after a dozen
         * of desparate days with only little success. ]
         *
         * The approach used here is inspired from OpenBSD.
         * First, the kernel creates IMMU mapping for itself
         * in context 1 (MEM_CONTEXT_TEMP) and switches to
         * it. Context 0 (MEM_CONTEXT_KERNEL) can be demapped
         * afterwards and replaced with the kernel permanent
         * mapping. Finally, the kernel switches back to
         * context 0 and demaps context 1.
         *
         * Moreover, the IMMU requires use of the FLUSH instructions.
         * But that is OK because we always use operands with
         * addresses already mapped by the taken over DTLB.
         */
        
        set kernel_image_start, %g5
        
        ! write ITLB tag of context 1
        SET_TLB_TAG(g1, MEM_CONTEXT_TEMP)
        set VA_DMMU_TAG_ACCESS, %g2
        stxa %g1, [%g2] ASI_IMMU
        flush %g5

        ! write ITLB data and install the temporary mapping in context 1
        SET_TLB_DATA(g1, g2, 0)                 ! use non-global mapping
        stxa %g1, [%g0] ASI_ITLB_DATA_IN_REG            
        flush %g5
        
        ! switch to context 1
        set MEM_CONTEXT_TEMP, %g1
        stxa %g1, [VA_PRIMARY_CONTEXT_REG] %asi ! ASI_DMMU is correct here !!!
        flush %g5
        
        ! demap context 0
        SET_TLB_DEMAP_CMD(g1, TLB_DEMAP_NUCLEUS)
        stxa %g0, [%g1] ASI_IMMU_DEMAP                  
        flush %g5
        
        ! write ITLB tag of context 0
        SET_TLB_TAG(g1, MEM_CONTEXT_KERNEL)
        set VA_DMMU_TAG_ACCESS, %g2
        stxa %g1, [%g2] ASI_IMMU
        flush %g5

        ! write ITLB data and install the permanent kernel mapping in context 0
        SET_TLB_DATA(g1, g2, 0)                 ! use non-global mapping
        stxa %g1, [%g0] ASI_ITLB_DATA_IN_REG            
        flush %g5

        ! switch to context 0
        stxa %g0, [VA_PRIMARY_CONTEXT_REG] %asi ! ASI_DMMU is correct here !!!
        flush %g5

        ! ensure nucleus mapping
        wrpr %g0, 1, %tl

        ! set context 1 in the primary context register
        set MEM_CONTEXT_TEMP, %g1
        stxa %g1, [VA_PRIMARY_CONTEXT_REG] %asi ! ASI_DMMU is correct here !!!
        flush %g5

        ! demap context 1
        SET_TLB_DEMAP_CMD(g1, TLB_DEMAP_PRIMARY)
        stxa %g0, [%g1] ASI_IMMU_DEMAP                  
        flush %g5
        
        ! set context 0 in the primary context register
        stxa %g0, [VA_PRIMARY_CONTEXT_REG] %asi ! ASI_DMMU is correct here !!!
        flush %g5
        
        ! set TL back to 0
        wrpr %g0, 0, %tl
        
        call main_bsp
        nop

        /* Not reached. */

2:
        b 2b
        nop