source: mainline/generic/src/mm/frame.c@ dc747e3

lfn serial ticket/834-toolchain-update topic/msim-upgrade topic/simplify-dev-export
Last change on this file since dc747e3 was dc747e3, checked in by Jakub Jermar <jakub@…>, 20 years ago

Add SPINLOCK_DECLARE and SPINLOCK_INITIALIZE macros.
SPINLOCK_DECLARE is to be used instead of direct spinlock_t declarations
in dynamically allocated structures on which spinlock_initialize() is called after
their creation.
SPINLOCK_INITIALIZE is to be used instead of direct spinlock_t declarations
of global spinlocks. It declares and initializes the spinlock.
Moreover, both macros are empty on UP so that -Wall warnings about unused structures
get supressed.

  • Property mode set to 100644
File size: 11.8 KB
Line 
1/*
2 * Copyright (C) 2001-2005 Jakub Jermar
3 * Copyright (C) 2005 Sergey Bondari
4 * All rights reserved.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 *
10 * - Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * - Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 * - The name of the author may not be used to endorse or promote products
16 * derived from this software without specific prior written permission.
17 *
18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
19 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
20 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
21 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
22 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
23 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
24 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
25 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
26 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
27 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28 */
29
30#include <typedefs.h>
31#include <arch/types.h>
32#include <mm/heap.h>
33#include <mm/frame.h>
34#include <mm/vm.h>
35#include <panic.h>
36#include <debug.h>
37#include <list.h>
38#include <synch/spinlock.h>
39#include <arch/asm.h>
40#include <arch.h>
41#include <print.h>
42#include <align.h>
43
44SPINLOCK_INITIALIZE(zone_head_lock); /**< this lock protects zone_head list */
45link_t zone_head; /**< list of all zones in the system */
46
47/** Blacklist containing non-available areas of memory.
48 *
49 * This blacklist is used to exclude frames that cannot be allocated
50 * (e.g. kernel memory) from available memory map.
51 */
52region_t zone_blacklist[ZONE_BLACKLIST_SIZE];
53count_t zone_blacklist_count = 0;
54
55static struct buddy_system_operations zone_buddy_system_operations = {
56 .find_buddy = zone_buddy_find_buddy,
57 .bisect = zone_buddy_bisect,
58 .coalesce = zone_buddy_coalesce,
59 .set_order = zone_buddy_set_order,
60 .get_order = zone_buddy_get_order,
61 .mark_busy = zone_buddy_mark_busy,
62};
63
64/** Initialize physical memory management
65 *
66 * Initialize physical memory managemnt.
67 */
68void frame_init(void)
69{
70 if (config.cpu_active == 1) {
71 zone_init();
72 frame_region_not_free(KA2PA(config.base), config.kernel_size);
73 }
74
75 frame_arch_init();
76}
77
78/** Allocate power-of-two frames of physical memory.
79 *
80 * @param flags Flags for host zone selection and address processing.
81 * @param order Allocate exactly 2^order frames.
82 *
83 * @return Allocated frame.
84 */
85__address frame_alloc(int flags, __u8 order)
86{
87 ipl_t ipl;
88 link_t *cur, *tmp;
89 zone_t *z;
90 zone_t *zone = NULL;
91 frame_t *frame = NULL;
92 __address v;
93
94loop:
95 ipl = interrupts_disable();
96 spinlock_lock(&zone_head_lock);
97
98 /*
99 * First, find suitable frame zone.
100 */
101 for (cur = zone_head.next; cur != &zone_head; cur = cur->next) {
102 z = list_get_instance(cur, zone_t, link);
103
104 spinlock_lock(&z->lock);
105
106 /* Check if the zone has 2^order frames area available */
107 if (buddy_system_can_alloc(z->buddy_system, order)) {
108 zone = z;
109 break;
110 }
111
112 spinlock_unlock(&z->lock);
113 }
114
115 if (!zone) {
116 if (flags & FRAME_PANIC)
117 panic("Can't allocate frame.\n");
118
119 /*
120 * TODO: Sleep until frames are available again.
121 */
122 spinlock_unlock(&zone_head_lock);
123 interrupts_restore(ipl);
124
125 panic("Sleep not implemented.\n");
126 goto loop;
127 }
128
129
130 /* Allocate frames from zone buddy system */
131 tmp = buddy_system_alloc(zone->buddy_system, order);
132
133 ASSERT(tmp);
134
135 /* Update zone information. */
136 zone->free_count -= (1 << order);
137 zone->busy_count += (1 << order);
138
139 /* Frame will be actually a first frame of the block. */
140 frame = list_get_instance(tmp, frame_t, buddy_link);
141
142 /* get frame address */
143 v = FRAME2ADDR(zone, frame);
144
145 spinlock_unlock(&zone->lock);
146 spinlock_unlock(&zone_head_lock);
147 interrupts_restore(ipl);
148
149
150 if (flags & FRAME_KA)
151 v = PA2KA(v);
152
153 return v;
154}
155
156/** Free a frame.
157 *
158 * Find respective frame structrue for supplied addr.
159 * Decrement frame reference count.
160 * If it drops to zero, move the frame structure to free list.
161 *
162 * @param addr Address of the frame to be freed. It must be a multiple of FRAME_SIZE.
163 */
164void frame_free(__address addr)
165{
166 ipl_t ipl;
167 link_t *cur;
168 zone_t *z;
169 zone_t *zone = NULL;
170 frame_t *frame;
171 ASSERT(addr % FRAME_SIZE == 0);
172
173 ipl = interrupts_disable();
174 spinlock_lock(&zone_head_lock);
175
176 /*
177 * First, find host frame zone for addr.
178 */
179 for (cur = zone_head.next; cur != &zone_head; cur = cur->next) {
180 z = list_get_instance(cur, zone_t, link);
181
182 spinlock_lock(&z->lock);
183
184 if (IS_KA(addr))
185 addr = KA2PA(addr);
186
187 /*
188 * Check if addr belongs to z.
189 */
190 if ((addr >= z->base) && (addr <= z->base + (z->free_count + z->busy_count) * FRAME_SIZE)) {
191 zone = z;
192 break;
193 }
194 spinlock_unlock(&z->lock);
195 }
196
197 ASSERT(zone != NULL);
198
199 frame = ADDR2FRAME(zone, addr);
200
201 ASSERT(frame->refcount);
202
203 if (!--frame->refcount) {
204 buddy_system_free(zone->buddy_system, &frame->buddy_link);
205 }
206
207 /* Update zone information. */
208 zone->free_count += (1 << frame->buddy_order);
209 zone->busy_count -= (1 << frame->buddy_order);
210
211 spinlock_unlock(&zone->lock);
212 spinlock_unlock(&zone_head_lock);
213 interrupts_restore(ipl);
214}
215
216/** Mark frame region not free.
217 *
218 * Mark frame region not free.
219 *
220 * @param base Base address of non-available region.
221 * @param size Size of non-available region.
222 */
223void frame_region_not_free(__address base, size_t size)
224{
225 index_t index;
226 index = zone_blacklist_count++;
227
228 /* Force base to the nearest lower address frame boundary. */
229 base = ALIGN_DOWN(base, FRAME_SIZE);
230 /* Align size to frame boundary. */
231 size = ALIGN_UP(size, FRAME_SIZE);
232
233 ASSERT(index < ZONE_BLACKLIST_SIZE);
234 zone_blacklist[index].base = base;
235 zone_blacklist[index].size = size;
236}
237
238
239/** Initialize zonekeeping
240 *
241 * Initialize zonekeeping.
242 */
243void zone_init(void)
244{
245 list_initialize(&zone_head);
246}
247
248/** Create frame zones in region of available memory.
249 *
250 * Avoid any black listed areas of non-available memory.
251 * Assume that the black listed areas cannot overlap
252 * one another or cross available memory region boundaries.
253 *
254 * @param base Base address of available memory region.
255 * @param size Size of the region.
256 */
257void zone_create_in_region(__address base, size_t size) {
258 int i;
259 zone_t * z;
260 __address s;
261 size_t sz;
262
263 ASSERT(base % FRAME_SIZE == 0);
264 ASSERT(size % FRAME_SIZE == 0);
265
266 if (!size)
267 return;
268
269 for (i = 0; i < zone_blacklist_count; i++) {
270 if (zone_blacklist[i].base >= base && zone_blacklist[i].base < base + size) {
271 s = base; sz = zone_blacklist[i].base - base;
272 ASSERT(base != s || sz != size);
273 zone_create_in_region(s, sz);
274
275 s = zone_blacklist[i].base + zone_blacklist[i].size;
276 sz = (base + size) - (zone_blacklist[i].base + zone_blacklist[i].size);
277 ASSERT(base != s || sz != size);
278 zone_create_in_region(s, sz);
279 return;
280
281 }
282 }
283
284 z = zone_create(base, size, 0);
285
286 if (!z) {
287 panic("Cannot allocate zone (base=%P, size=%d).\n", base, size);
288 }
289
290 zone_attach(z);
291}
292
293
294/** Create frame zone
295 *
296 * Create new frame zone.
297 *
298 * @param start Physical address of the first frame within the zone.
299 * @param size Size of the zone. Must be a multiple of FRAME_SIZE.
300 * @param flags Zone flags.
301 *
302 * @return Initialized zone.
303 */
304zone_t * zone_create(__address start, size_t size, int flags)
305{
306 zone_t *z;
307 count_t cnt;
308 int i;
309 __u8 max_order;
310
311 ASSERT(start % FRAME_SIZE == 0);
312 ASSERT(size % FRAME_SIZE == 0);
313
314 cnt = size / FRAME_SIZE;
315
316 z = (zone_t *) early_malloc(sizeof(zone_t));
317 if (z) {
318 link_initialize(&z->link);
319 spinlock_initialize(&z->lock, "zone_lock");
320
321 z->base = start;
322 z->flags = flags;
323
324 z->free_count = cnt;
325 z->busy_count = 0;
326
327 z->frames = (frame_t *) early_malloc(cnt * sizeof(frame_t));
328 if (!z->frames) {
329 early_free(z);
330 return NULL;
331 }
332
333 for (i = 0; i<cnt; i++) {
334 frame_initialize(&z->frames[i], z);
335 }
336
337 /*
338 * Create buddy system for the zone
339 */
340 for (max_order = 0; cnt >> max_order; max_order++)
341 ;
342 z->buddy_system = buddy_system_create(max_order, &zone_buddy_system_operations, (void *) z);
343
344 /* Stuffing frames */
345 for (i = 0; i<cnt; i++) {
346 z->frames[i].refcount = 0;
347 buddy_system_free(z->buddy_system, &z->frames[i].buddy_link);
348 }
349 }
350 return z;
351}
352
353/** Attach frame zone
354 *
355 * Attach frame zone to zone list.
356 *
357 * @param zone Zone to be attached.
358 */
359void zone_attach(zone_t *zone)
360{
361 ipl_t ipl;
362
363 ipl = interrupts_disable();
364 spinlock_lock(&zone_head_lock);
365
366 list_append(&zone->link, &zone_head);
367
368 spinlock_unlock(&zone_head_lock);
369 interrupts_restore(ipl);
370}
371
372/** Initialize frame structure
373 *
374 * Initialize frame structure.
375 *
376 * @param frame Frame structure to be initialized.
377 * @param zone Host frame zone.
378 */
379void frame_initialize(frame_t *frame, zone_t *zone)
380{
381 frame->refcount = 1;
382 frame->buddy_order = 0;
383}
384
385
386/** Buddy system find_buddy implementation
387 *
388 * @param b Buddy system.
389 * @param block Block for which buddy should be found
390 *
391 * @return Buddy for given block if found
392 */
393link_t * zone_buddy_find_buddy(buddy_system_t *b, link_t * block) {
394 frame_t * frame;
395 zone_t * zone;
396 index_t index;
397 bool is_left, is_right;
398
399 frame = list_get_instance(block, frame_t, buddy_link);
400 zone = (zone_t *) b->data;
401
402 ASSERT(IS_BUDDY_ORDER_OK(FRAME_INDEX(zone, frame), frame->buddy_order));
403
404 is_left = IS_BUDDY_LEFT_BLOCK(zone, frame);
405 is_right = IS_BUDDY_RIGHT_BLOCK(zone, frame);
406
407 ASSERT(is_left ^ is_right);
408
409 if (is_left) {
410 index = (FRAME_INDEX(zone, frame)) + (1 << frame->buddy_order);
411 } else { // if (is_right)
412 index = (FRAME_INDEX(zone, frame)) - (1 << frame->buddy_order);
413 }
414
415 if (FRAME_INDEX_VALID(zone, index)) {
416 if ( zone->frames[index].buddy_order == frame->buddy_order &&
417 zone->frames[index].refcount == 0) {
418 return &zone->frames[index].buddy_link;
419 }
420 }
421
422 return NULL;
423}
424
425/** Buddy system bisect implementation
426 *
427 * @param b Buddy system.
428 * @param block Block to bisect
429 *
430 * @return right block
431 */
432link_t * zone_buddy_bisect(buddy_system_t *b, link_t * block) {
433 frame_t * frame_l, * frame_r;
434
435 frame_l = list_get_instance(block, frame_t, buddy_link);
436 frame_r = (frame_l + (1 << (frame_l->buddy_order - 1)));
437
438 return &frame_r->buddy_link;
439}
440
441/** Buddy system coalesce implementation
442 *
443 * @param b Buddy system.
444 * @param block_1 First block
445 * @param block_2 First block's buddy
446 *
447 * @return Coalesced block (actually block that represents lower address)
448 */
449link_t * zone_buddy_coalesce(buddy_system_t *b, link_t * block_1, link_t * block_2) {
450 frame_t * frame1, * frame2;
451
452 frame1 = list_get_instance(block_1, frame_t, buddy_link);
453 frame2 = list_get_instance(block_2, frame_t, buddy_link);
454
455 return frame1 < frame2 ? block_1 : block_2;
456}
457
458/** Buddy system set_order implementation
459 *
460 * @param b Buddy system.
461 * @param block Buddy system block
462 * @param order Order to set
463 */
464void zone_buddy_set_order(buddy_system_t *b, link_t * block, __u8 order) {
465 frame_t * frame;
466 frame = list_get_instance(block, frame_t, buddy_link);
467 frame->buddy_order = order;
468}
469
470/** Buddy system get_order implementation
471 *
472 * @param b Buddy system.
473 * @param block Buddy system block
474 *
475 * @return Order of block
476 */
477__u8 zone_buddy_get_order(buddy_system_t *b, link_t * block) {
478 frame_t * frame;
479 frame = list_get_instance(block, frame_t, buddy_link);
480 return frame->buddy_order;
481}
482
483/** Buddy system mark_busy implementation
484 *
485 * @param b Buddy system
486 * @param block Buddy system block
487 *
488 */
489void zone_buddy_mark_busy(buddy_system_t *b, link_t * block) {
490 frame_t * frame;
491 frame = list_get_instance(block, frame_t, buddy_link);
492 frame->refcount = 1;
493}
Note: See TracBrowser for help on using the repository browser.