Version 82 (modified by 12 years ago) ( diff ) | ,
---|
Our Lab
This page lists the hardware which is available for testing HelenOS and is within the reach of some HelenOS developer. For hardware which we don't have, but would like to have, please go to our Wanted page.
Per processor architecture
Architecture | Product name | HelenOS contact | Current status | Working release | Comments |
---|---|---|---|---|---|
Image(htdocs:bullet_green.gif) amd64/ia32 | AMD Phenom Triple, ASUSTeK M3N WS, 2GiB RAM | MD | working | mainline (r996) | #248, (2) |
amd64/ia32 | Apple Mac Mini (Mid 2011), 4GiB RAM | MD | partially working | mainline (r1308) | #248 |
amd64/ia32 | Apple Mac Pro 4.1 (Early 2009), 3GiB RAM | MD | partially working | mainline (r992) | #248, (4) |
amd64/ia32 | Intel Core 2 Quad (2x), Intel S5000XVNSATAR, 4GiB RAM | MD | working | mainline (r1560) | |
amd64/ia32 | ThinkPad X220, 4GiB RAM | JJ | working | mainline (r1490) | |
arm32 | Neo FreeRunner, 128MiB RAM | JS, JJ, VP | working | mainline (r1489) | HelenOS on Neo FreeRunner |
arm32 | HP iPAQ H5500 | MD | unsupported | ||
ia32 | ThinkPad T60, 1GiB RAM | MD | working | mainline (r992) | |
ia32 | Intel Pentium 4 (HT), 1GiB RAM | JJ | unknown | 0.2.0 | |
ia32 | Intel Pentium Dual-Core CPU E5200, Fujitsu Esprimo P2540, 3GiB RAM | JJ | working | mainline | (2) |
ia32 | AMD Phenom II X6 1090T, 8GiB RAM | JJ | partially working | mainline | |
ia64 | Dell PowerEdge 3250, 4GiB RAM | JJ, JV | partially working | 0.4.0 | (4), Service Tag: CMN8W31, lshw -numeric, lsusb -v |
ia64 | Dell PowerEdge 7150, 4GiB RAM | MD | working | mainline (r1560) | (1) |
mips32 | Ben NanoNote, 16MiB RAM | MD | unsupported | ||
mips64 | Sgi Octane (IP30), 256MiB RAM | MD | unsupported | ||
mips64 | Lemote Fuloong, 256MiB RAM | MD | unsupported | ||
ppc32 | | JJ | unknown | 0.4.1 | Seems to be dead |
ppc32 | Apple iMac G4 (Flat Panel), 384MiB RAM | MD | working | mainline (r992) | (4) |
ppc64 | Apple iMac G5 (Ambient Light Sensor), 768MiB RAM | MD | unsupported | ||
sparc32 | LEON3 on Hpe-mini LEC2 FPGA board, 256MiB RAM | MD | unsupported | ||
sparc64 | Sun Ultra 60, 256MiB RAM | MD | working | mainline (r1388) | |
sparc64 | Sun Ultra 5, 128MiB RAM | JJ | working | mainline (r1046) | |
sparc64 | Sun Ultra 60, 2048MiB RAM | JJ | partially working | mainline (r1536) | (5) (6), #4 |
sparc64 | Sun SPARC Enterprise T1000, 4GiB RAM | MD | not working | 0.4.2 | #324, prtconf -pv |
sparc64 | Sun Fire V100, 256MiB RAM | JJ | unknown | ||
sparc64 | Sun Fire V120, 256MiB RAM | MD | unknown | ||
sparc64 | Sun Fire V240, 512MiB RAM | JJ | unknown |
Comments
- PS/2 keyboard input not working.
- Too slow clock in absence of any load. When multiple tester loop1 instances ran, clock seemed to be OK.
- Boots OK, but unusable due to USB-only HID.
- Loader detected only 1024MiB of memory when in reality the system has 2048MiB
- When the system has two graphic cards, the last message printed by loader is Setting up screens…; if only one graphic card is present, the system boot fine
Legend of the Working release field
- mainline (revision) = HelenOS is being regularly tested on the given machine as part of the current development efforts, thus the machine should be supported in the next stable release. The latest mainline Bazaar revision should be appended in the brackets.
- none = HelenOS was never actually tested on the given machine, but it is reasonable to believe that the probability of HelenOS working flawlessly on the machine is high (due to similarity to other supported machines).
- unsupported = The given machine is currently unsupported because of some fundamental reason (i.e. the hardware architecture is out of the scope of the current HelenOS development efforts).
- specific version = HelenOS did support the given machine in the past, but the support has been since broken, usually due to some fundamental changes which were not debugged on the given machine so far.
Legend of the Current status field
- working () = Almost all features of the indicated release are supported on the machine.
- partially working () = The indicated release is more-or-less supported on the machine, but with some glitches or limitations indicated.
- unknown () = The machine was working in the release indicated, but it has not been tested for a while.
- not working () = Although the machine should be supported, it has some major problems.
- empty status () = Unsupported machine.
Note:
See TracWiki
for help on using the wiki.