Changes between Initial Version and Version 1 of GTA02LinuxDmesg

Timestamp:

2013-03-27T00:30:15Z (13 years ago)

Author:

Jakub Jermář

Comment:

—

GTA02LinuxDmesg

@@ +1 @@
+= Linux `dmesg` output from OpenMoko Neo Freerunner boot =
+
+{{{
+[    0.000000] Initializing cgroup subsys cpuset
+[    0.000000] Initializing cgroup subsys cpu
+[    0.000000] Linux version 2.6.39.4 (bitbake@opmbuild) (gcc version 4.7.2 (GCC) ) #1 Fri Nov 23 19:07:25 CET 2012
+[    0.000000] CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177
+[    0.000000] CPU: VIVT data cache, VIVT instruction cache
+[    0.000000] Machine: GTA02
+[    0.000000] Memory policy: ECC disabled, Data cache writeback
+[    0.000000] BUG: mapping for 0x19000000 at 0xe0000000 overlaps vmalloc space
+[    0.000000] CPU S3C2442B (id 0x32440aab)
+[    0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
+[    0.000000] S3C244X: core 400.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz
+[    0.000000] CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
+[    0.000000] On node 0 totalpages: 32768
+[    0.000000] free_area_init_node: node 0, pgdat c03a4ab8, node_mem_map c03f5000
+[    0.000000]   Normal zone: 256 pages used for memmap
+[    0.000000]   Normal zone: 0 pages reserved
+[    0.000000]   Normal zone: 32512 pages, LIFO batch:7
+[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
+[    0.000000] pcpu-alloc: [0] 0 
+[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
+[    0.000000] Kernel command line: rootfstype=jffs2 root=/dev/mtdblock6 console=ttySAC2,115200 console=tty0 loglevel=4 regular_boot mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x0f6a0000(rootfs)
+[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
+[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
+[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
+[    0.000000] Memory: 128MB = 128MB total
+[    0.000000] Memory: 125860k/125860k available, 5212k reserved, 0K highmem
+[    0.000000] Virtual kernel memory layout:
+[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
+[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
+[    0.000000]     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
+[    0.000000]     vmalloc : 0xc8800000 - 0xf6000000   ( 728 MB)
+[    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
+[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
+[    0.000000]       .init : 0xc0008000 - 0xc0026000   ( 120 kB)
+[    0.000000]       .text : 0xc0026000 - 0xc0385968   (3455 kB)
+[    0.000000]       .data : 0xc0386000 - 0xc03a5160   ( 125 kB)
+[    0.000000] NR_IRQS:85 nr_irqs:85 85
+[    0.000000] irq: clearing pending ext status 000902f0
+[    0.000000] irq: clearing pending ext status 000902d0
+[    0.000000] irq: clearing subpending status 00000087
+[    0.000000] irq: clearing subpending status 00000082
+[    0.000000] timer tcon=00500000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8
+[    0.000000] Console: colour dummy device 80x30
+[    0.000000] console [tty0] enabled
+[    0.000000] console [ttySAC2] enabled
+[    0.005000] Calibrating delay loop... 199.47 BogoMIPS (lpj=498688)
+[    0.045000] pid_max: default: 32768 minimum: 301
+[    0.045000] Mount-cache hash table entries: 512
+[    0.045000] Initializing cgroup subsys ns
+[    0.045000] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
+[    0.045000] Initializing cgroup subsys cpuacct
+[    0.045000] Initializing cgroup subsys devices
+[    0.045000] Initializing cgroup subsys freezer
+[    0.045000] CPU: Testing write buffer coherency: ok
+[    0.045000] devtmpfs: initialized
+[    0.050000] print_constraints: dummy: 
+[    0.050000] NET: Registered protocol family 16
+[    0.055000] S3C Power Management, Copyright 2004 Simtec Electronics
+[    0.060000] S3C2442: Initialising architecture
+[    0.060000] S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics
+[    0.060000] DMA channel 0 at c8808000, irq 33
+[    0.060000] DMA channel 1 at c8808040, irq 34
+[    0.060000] DMA channel 2 at c8808080, irq 35
+[    0.060000] DMA channel 3 at c88080c0, irq 36
+[    0.060000] S3C244X: Clock Support, DVS off
+[    0.060000] s3c-adc s3c24xx-adc: attached adc driver
+[    0.060000] s3c24xx-pwm s3c24xx-pwm.0: tin at 25000000, tdiv at 25000000, tin=divclk, base 0
+[    0.060000] s3c24xx-pwm s3c24xx-pwm.1: tin at 25000000, tdiv at 25000000, tin=divclk, base 8
+[    0.060000] s3c24xx-pwm s3c24xx-pwm.2: tin at 8333333, tdiv at 8333333, tin=divclk, base 12
+[    0.060000] s3c24xx-pwm s3c24xx-pwm.3: tin at 8333333, tdiv at 8333333, tin=divclk, base 16
+[    0.065000] bio: create slab <bio-0> at 0
+[    0.070000] s3c-i2c s3c2440-i2c: slave address 0x10
+[    0.070000] s3c-i2c s3c2440-i2c: bus frequency set to 97 KHz
+[    0.080000] pcf50633 0-0073: Probed device version 19 variant 132
+[    0.110000] wake enabled for irq 53
+[    0.110000] print_constraints: auto: 3300 mV normal 
+[    0.115000] print_constraints: down1: 1300 <--> 1600 mV at 1300 mV normal 
+[    0.125000] print_constraints: down2: 1800 mV normal 
+[    0.125000] print_constraints: ldo1: 3300 mV normal 
+[    0.125000] print_constraints: ldo2: 3300 mV normal 
+[    0.125000] print_constraints: ldo3: 3000 mV normal 
+[    0.130000] print_constraints: ldo4: 3200 mV normal 
+[    0.130000] print_constraints: ldo5: 3000 mV normal 
+[    0.130000] print_constraints: ldo6: 3000 mV normal 
+[    0.130000] print_constraints: hcldo: 2000 <--> 3300 mV at 3300 mV normal 
+[    0.135000] print_constraints: memldo: 1800 mV normal 
+[    0.135000] s3c-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
+[    0.180000] NET: Registered protocol family 2
+[    0.180000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
+[    0.180000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
+[    0.180000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
+[    0.180000] TCP: Hash tables configured (established 4096 bind 4096)
+[    0.180000] TCP reno registered
+[    0.180000] UDP hash table entries: 256 (order: 0, 4096 bytes)
+[    0.180000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
+[    0.185000] NET: Registered protocol family 1
+[    0.185000] gta02-pm-bt gta02-pm-bt.0: Openmoko Freerunner Bluetooth Power Management: starting
+[    0.185000] gta02-pm-bt gta02-pm-bt.0: __gta02_pm_bt_toggle_radio 1
+[    0.205000] gta02-pm-gps gta02-pm-gps.0: starting
+[    0.205000] gta02-pm-wlan gta02-pm-wlan.0: starting
+[    0.410000] JFFS2 version 2.2. (NAND) (SUMMARY)  \xffffffc2\xffffffa9 2001-2006 Red Hat, Inc.
+[    0.415000] msgmni has been set to 245
+[    0.415000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
+[    0.415000] io scheduler noop registered
+[    0.415000] io scheduler deadline registered (default)
+[    0.450000] print_constraints: GSM: 3700 mV normal 
+[    0.470000] print_constraints: USBHOST: 3700 mV normal 
+[    0.480000] s3c2440-uart.0: ttySAC0 at MMIO 0x50000000 (irq = 70) is a S3C2440
+[    0.480000] s3c2440-uart.1: ttySAC1 at MMIO 0x50004000 (irq = 73) is a S3C2440
+[    0.480000] s3c2440-uart.2: ttySAC2 at MMIO 0x50008000 (irq = 76) is a S3C2440
+[    0.500000] brd: module loaded
+[    0.505000] neo1973-resume neo1973-resume.0: starting
+[    0.545000] SMEDIA Glamo frame buffer driver (C) 2007 Openmoko, Inc.
+[    0.545000] glamo-fb glamo-fb.0: spin_lock_init
+[    0.615000] Console: switching to colour frame buffer device 60x40
+[    0.675000] fb0: SMedia Glamo frame buffer device
+[    0.675000] glamo3362 glamo3362.0: Glamo core PLL1: 49119232Hz, PLL2: 89980928Hz
+[    0.675000] physmap platform flash device: 00200000 at 18000000
+[    0.675000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000020 Chip ID 0x008813
+[    0.680000] Intel/Sharp Extended Query Table at 0x0039
+[    0.680000] Intel/Sharp Extended Query Table at 0x0039
+[    0.680000] Intel/Sharp Extended Query Table at 0x0039
+[    0.680000] Intel/Sharp Extended Query Table at 0x0039
+[    0.680000] Intel/Sharp Extended Query Table at 0x0039
+[    0.680000] cfi_cmdset_0001: Erase suspend on write enabled
+[    0.680000] erase region 0: offset=0x0,size=0x2000,blocks=8
+[    0.680000] erase region 1: offset=0x10000,size=0x10000,blocks=31
+[    0.680000] physmap-flash.0: 1 set(s) of 1 interleaved chips --> 4 partitions of 512 KiB
+[    0.680000] RedBoot partition parsing not available
+[    0.685000] S3C24XX NAND Driver, (c) 2004 Simtec Electronics
+[    0.685000] s3c24xx-nand s3c2440-nand: Tacls=1, 10ns Twrph0=3 30ns, Twrph1=2 20ns
+[    0.685000] s3c24xx-nand s3c2440-nand: NAND soft ECC
+[    0.685000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xaa (Samsung NAND 256MiB 1,8V 8-bit)
+[    0.685000] 6 cmdlinepart partitions found on MTD device neo1973-nand
+[    0.685000] Creating 6 MTD partitions on "neo1973-nand":
+[    0.685000] 0x000000000000-0x000000040000 : "u-boot"
+[    0.690000] 0x000000040000-0x000000080000 : "u-boot_env"
+[    0.690000] 0x000000080000-0x000000880000 : "kernel"
+[    0.695000] 0x000000880000-0x000000920000 : "splash"
+[    0.700000] 0x000000920000-0x000000960000 : "factory"
+[    0.700000] 0x000000960000-0x000010000000 : "rootfs"
+[    0.925000] mousedev: PS/2 mouse device common for all mice
+[    0.925000] input: gpio-keys as /devices/platform/gpio-keys/input/input0
+[    0.925000] samsung-ts s3c2440-ts: driver attached, registering input device
+[    0.925000] input: S3C24XX TouchScreen as /devices/virtual/input/input1
+[    0.930000] input: PCF50633 PMU events as /devices/virtual/input/input2
+[    0.935000] pcf50633-rtc pcf50633-rtc: rtc core: registered pcf50633-rtc as rtc0
+[    0.935000] S3C24XX RTC, (c) 2004,2006 Simtec Electronics
+[    0.935000] i2c /dev entries driver
+[    0.940000] S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
+[    0.940000] s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
+[    0.940000] cpuidle: using governor ladder
+[    0.940000] s3c-sdi s3c2440-sdi: powered down.
+[    0.940000] s3c-sdi s3c2440-sdi: mmc0 - using pio, sw SDIO IRQ
+[    0.945000] glamo-mci glamo-mci.0: glamo_mci driver (C)2007 Openmoko, Inc
+[    0.945000] s3c-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz).
+[    0.945000] glamo-mci glamo-mci.0: glamo_mci_set_ios: power down.
+[    0.945000] Registered led device: gta02:red:aux
+[    0.945000] Registered led device: gta02:orange:power
+[    0.945000] Registered led device: gta02:blue:power
+[    0.950000] Registered led device: gta02::vibrator
+[    0.950000] TCP westwood registered
+[    0.950000] NET: Registered protocol family 17
+[    0.950000] Registering the dns_resolver key type
+[    0.960000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz).
+[    0.970000] regulator_init_complete: ldo5: disabling
+[    0.975000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz).
+[    0.975000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz).
+[    0.975000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz).
+[    0.990000] pcf50633-rtc pcf50633-rtc: setting system clock to 2000-01-01 00:00:22 UTC (946684822)
+[    0.995000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz).
+[    1.005000] mmc0: queuing unknown CIS tuple 0x01 (3 bytes)
+[    1.025000] mmc0: queuing unknown CIS tuple 0x1a (5 bytes)
+[    1.030000] mmc0: queuing unknown CIS tuple 0x1b (8 bytes)
+[    1.030000] s3c-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz).
+[    1.030000] s3c-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz).
+[    1.030000] mmc0: queuing unknown CIS tuple 0x80 (1 bytes)
+[    1.030000] mmc0: queuing unknown CIS tuple 0x81 (1 bytes)
+[    1.030000] mmc0: queuing unknown CIS tuple 0x82 (1 bytes)
+[    1.035000] mmc0: new SDIO card at address 0001
+[    1.040000] glamo-mci glamo-mci.0: powered (vdd = 21) clk: 0kHz div=0 (req: 0kHz). Bus width=0
+[    1.060000] glamo-mci glamo-mci.0: powered (vdd = 21) clk: 399kHz div=0 (req: 400kHz). Bus width=0
+[    1.080000] glamo-mci glamo-mci.0: powered (vdd = 21) clk: 399kHz div=0 (req: 400kHz). Bus width=0
+[    1.090000] glamo-mci glamo-mci.0: powered (vdd = 21) clk: 399kHz div=0 (req: 400kHz). Bus width=0
+[    1.110000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0
+[    1.115000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0
+[    1.130000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0
+[    1.485000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0
+[    1.495000] mmc1: host does not support reading read-only switch. assuming write-enable.
+[    1.500000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0
+[    1.505000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 16373kHz div=0 (req: 17000kHz). Bus width=0
+[    1.510000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 16373kHz div=0 (req: 17000kHz). Bus width=2
+[    1.510000] mmc1: new high speed SD card at address 0007
+[    1.525000] mmcblk0: mmc1:0007 SD2GB 1.80 GiB 
+[    1.530000]  mmcblk0: p1 p2
+[    2.440000] Empty flash at 0x07eda044 ends at 0x07eda800
+[    3.060000] VFS: Mounted root (jffs2 filesystem) on device 31:6.
+[    3.070000] devtmpfs: mounted
+[    3.070000] Freeing init memory: 120K
+[    3.955000] pcf50633 0-0073: usb curlim to 1000 mA
+[    4.625000] systemd[1]: systemd 195 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX +IMA +SYSVINIT -LIBCRYPTSETUP +GCRYPT +ACL +XZ; debian)
+[    5.015000] systemd[1]: Inserted module 'autofs4'
+[    5.640000] NET: Registered protocol family 10
+[    5.650000] systemd[1]: Inserted module 'ipv6'
+[    5.650000] systemd[1]: Set hostname to <om-gta02>.
+[    6.305000] systemd[1]: Cannot add dependency job for unit xinput-calibrator.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
+[    6.310000] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
+[    6.310000] systemd[1]: Expecting device dev-ttySAC2.device...
+[    6.315000] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
+[    6.315000] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
+[    6.315000] systemd[1]: Starting Remote File Systems.
+[    6.320000] systemd[1]: Reached target Remote File Systems.
+[    6.320000] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
+[    6.325000] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
+[    6.325000] systemd[1]: Starting Delayed Shutdown Socket.
+[    6.325000] systemd[1]: Listening on Delayed Shutdown Socket.
+[    6.330000] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
+[    6.330000] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
+[    6.330000] systemd[1]: Starting udev Kernel Socket.
+[    6.335000] systemd[1]: Listening on udev Kernel Socket.
+[    6.335000] systemd[1]: Starting udev Control Socket.
+[    6.340000] systemd[1]: Listening on udev Control Socket.
+[    6.340000] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
+[    6.340000] systemd[1]: Starting Swap.
+[    6.345000] systemd[1]: Reached target Swap.
+[    6.345000] systemd[1]: Starting Journal Socket.
+[    6.350000] systemd[1]: Listening on Journal Socket.
+[    6.350000] systemd[1]: Started File System Check on Root Device.
+[    6.350000] systemd[1]: Starting Remount Root and Kernel File Systems...
+[    6.400000] systemd[1]: Starting Load Kernel Modules...
+[    6.420000] systemd[1]: Started Set Up Additional Binary Formats.
+[    6.430000] systemd[1]: Starting Apply Kernel Variables...
+[    6.455000] systemd[1]: Mounted Huge Pages File System.
+[    6.460000] systemd[1]: Starting Journal Service...
+[    6.505000] systemd[1]: Started Journal Service.
+[    6.515000] systemd[1]: Started Machine ID first boot configure.
+[    6.515000] systemd[1]: Mounted POSIX Message Queue File System.
+[    6.515000] systemd[1]: Starting udev Kernel Device Manager...
+[    6.550000] systemd[1]: Starting udev Coldplug all Devices...
+[    7.085000] HIFInit
+[    7.765000] systemd-udevd[49]: starting version 195
+[    8.080000] systemd-modules-load[43]: Inserted module 'ar6000'
+[    8.450000] Bluetooth: Core ver 2.16
+[    8.450000] NET: Registered protocol family 31
+[    8.450000] Bluetooth: HCI device and connection manager initialized
+[    8.450000] Bluetooth: HCI socket layer initialized
+[    8.450000] Bluetooth: L2CAP socket layer initialized
+[    8.525000] systemd-udevd[49]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/60-gpsd.rules:43
+[    8.525000] systemd-udevd[49]: invalid rule '/etc/udev/rules.d/60-gpsd.rules:43'
+[    8.540000] Bluetooth: SCO socket layer initialized
+[    8.590000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
+[    8.590000] Bluetooth: BNEP filters: protocol multicast
+[    8.635000] systemd-modules-load[43]: Inserted module 'bnep'
+[    9.080000] bq27000-battery bq27000-battery.0: support ver. 1.2.0 enabled
+[   10.005000] usbcore: registered new interface driver usbfs
+[   10.005000] usbcore: registered new interface driver hub
+[   10.025000] usbcore: registered new device driver usb
+[   10.075000] Bluetooth: Generic Bluetooth USB driver ver 0.6
+[   10.075000] usbcore: registered new interface driver btusb
+[   10.150000] s3c2410_udc: debugfs dir creation failed -19
+[   10.165000] s3c2440-usbgadget s3c2440-usbgadget: S3C2440: increasing FIFO to 128 bytes
+[   10.275000] usb0: MAC 00:1f:11:01:97:34
+[   10.275000] usb0: HOST MAC 00:1f:11:01:97:35
+[   10.275000] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
+[   10.275000] g_ether gadget: g_ether ready
+[   10.385000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
+[   10.575000] g_ether gadget: full speed config #1: CDC Ethernet (ECM)
+[   10.680000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
+[   10.680000] s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
+[   10.680000] s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
+[   10.750000] systemd-journald[46]: Received SIGUSR1
+[   10.770000] systemd-journald[46]: Failed to open system journal: Invalid argument
+[   10.845000] s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
+[   10.900000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
+[   10.900000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
+[   10.900000] usb usb1: Product: S3C24XX OHCI
+[   10.900000] usb usb1: Manufacturer: Linux 2.6.39.4 ohci_hcd
+[   10.900000] usb usb1: SerialNumber: s3c24xx
+[   10.905000] hub 1-0:1.0: USB hub found
+[   10.905000] hub 1-0:1.0: 2 ports detected
+[   11.050000] PPP generic driver version 2.4.2
+[   11.210000] Bluetooth: RFCOMM TTY layer initialized
+[   11.210000] Bluetooth: RFCOMM socket layer initialized
+[   11.210000] Bluetooth: RFCOMM ver 1.11
+[   11.320000] usb 1-1: new full speed USB device number 2 using s3c2410-ohci
+[   11.900000] usb 1-1: New USB device found, idVendor=0a12, idProduct=0001
+[   11.900000] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
+[   12.580000] asoc: wm8753-hifi <-> s3c24xx-iis mapping ok
+}}}