# # Copyright (c) 2005 Jakub Jermar # All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # # - Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # - Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in the # documentation and/or other materials provided with the distribution. # - The name of the author may not be used to endorse or promote products # derived from this software without specific prior written permission. # # THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR # IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES # OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. # IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, # INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT # NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF # THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # #include #include #include #include #include #define RR_MASK (0xFFFFFFFF00000002) #define RID_SHIFT 8 #define PS_SHIFT 2 #define KERNEL_TRANSLATION_I 0x0010000000000661 #define KERNEL_TRANSLATION_D 0x0010000000000661 .section K_TEXT_START, "ax" stack0: # # Kernel entry point. # # This is where we are passed control from the boot code. # Register contents: # # r2 Address of the boot code's bootinfo structure. # SYMBOL(kernel_image_start) .auto mov psr.l = r0 srlz.i srlz.d # Fill TR.i and TR.d using Region Register #VRN_KERNEL movl r8 = (VRN_KERNEL << VRN_SHIFT) mov r9 = rr[r8] movl r10 = (RR_MASK) and r9 = r10, r9 movl r10 = (((RID_KERNEL7) << RID_SHIFT) | (KERNEL_PAGE_WIDTH << PS_SHIFT)) or r9 = r10, r9 mov rr[r8] = r9 movl r8 = (VRN_KERNEL << VRN_SHIFT) mov cr.ifa = r8 mov r11 = cr.itir movl r10 = (KERNEL_PAGE_WIDTH << PS_SHIFT) or r10 = r10, r11 mov cr.itir = r10 movl r10 = (KERNEL_TRANSLATION_I) itr.i itr[r0] = r10 movl r10 = (KERNEL_TRANSLATION_D) itr.d dtr[r0] = r10 # Initialize DCR movl r10 = (DCR_DM_MASK | DCR_DP_MASK | DCR_DK_MASK | DCR_DX_MASK | DCR_DR_MASK | DCR_DA_MASK | DCR_DD_MASK | DCR_LC_MASK) mov r9 = cr.dcr or r10 = r10, r9 mov cr.dcr = r10 # Initialize PSR movl r10 = (PSR_DT_MASK | PSR_RT_MASK | PSR_IT_MASK | PSR_IC_MASK) /* Enable paging */ mov r9 = psr or r10 = r10, r9 mov cr.ipsr = r10 mov cr.ifs = r0 movl r8 = paging_start mov cr.iip = r8 srlz.d srlz.i .explicit /* * Return From Interrupt is the only way to * fill the upper half word of PSR. */ rfi ;; paging_start: /* * Now we are paging. */ # # Set Interruption Vector Address # (i.e. location of interruption vector table) # movl r8 = ivt ;; mov cr.iva = r8 srlz.d ;; # Switch to register bank 1 bsw.1 # Initialize register stack mov ar.rsc = r0 movl r8 = (VRN_KERNEL << VRN_SHIFT) ;; mov ar.bspstore = r8 loadrs # # Initialize memory stack to some sane value and allocate a scratch area # on it. # movl sp = stack0 ;; add sp = -16, sp # Initialize gp (Global Pointer) register movl gp = __gp # # Initialize bootinfo on BSP. # movl r20 = (VRN_KERNEL << VRN_SHIFT) ;; or r20 = r20, r2 ;; addl r21 = @gprel(bootinfo), gp ;; st8 [r21] = r20 ssm (1 << 19) ;; /* Disable f32 - f127 */ srlz.i srlz.d ;; br.call.sptk.many b0 = ia64_pre_main 0: br.call.sptk.many b0 = main_bsp 0: br 0b