Ignore:
File:
1 edited

Legend:

Unmodified
Added
Removed
  • uspace/lib/usb/src/pipesinit.c

    rfa0f53b r4ede178  
    365365        pipe->direction = direction;
    366366        pipe->refcount = 0;
    367         pipe->auto_reset_halt = false;
    368367
    369368        return EOK;
     
    386385            0, USB_TRANSFER_CONTROL, CTRL_PIPE_MIN_PACKET_SIZE,
    387386            USB_DIRECTION_BOTH);
    388 
    389         pipe->auto_reset_halt = true;
    390387
    391388        return rc;
     
    462459    usb_hc_connection_t *hc_connection)
    463460{
    464         return usb_pipe_register_with_speed(pipe, USB_SPEED_MAX + 1,
    465             interval, hc_connection);
    466 }
    467 
    468 /** Register endpoint with a speed at the host controller.
    469  *
    470  * You will rarely need to use this function because it is needed only
    471  * if the registered endpoint is of address 0 and there is no other way
    472  * to tell speed of the device at address 0.
    473  *
    474  * @param pipe Pipe to be registered.
    475  * @param speed Speed of the device
    476  *      (invalid speed means use previously specified one).
    477  * @param interval Polling interval.
    478  * @param hc_connection Connection to the host controller (must be opened).
    479  * @return Error code.
    480  */
    481 int usb_pipe_register_with_speed(usb_pipe_t *pipe, usb_speed_t speed,
    482     unsigned int interval,
    483     usb_hc_connection_t *hc_connection)
    484 {
    485461        assert(pipe);
    486462        assert(hc_connection);
     
    490466        }
    491467
    492 #define _PACK2(high, low) (((high) << 16) + (low))
    493 #define _PACK3(high, middle, low) (((((high) << 8) + (middle)) << 8) + (low))
    494 
    495         return async_req_4_0(hc_connection->hc_phone,
     468#define _PACK(high, low) ((high) * 256 + (low))
     469
     470        return async_req_5_0(hc_connection->hc_phone,
    496471            DEV_IFACE_ID(USBHC_DEV_IFACE), IPC_M_USBHC_REGISTER_ENDPOINT,
    497             _PACK2(pipe->wire->address, pipe->endpoint_no),
    498             _PACK3(speed, pipe->transfer_type, pipe->direction),
    499             _PACK2(pipe->max_packet_size, interval));
    500 
    501 #undef _PACK2
    502 #undef _PACK3
     472            _PACK(pipe->wire->address, pipe->endpoint_no),
     473            _PACK(pipe->transfer_type, pipe->direction),
     474            pipe->max_packet_size, interval);
     475
     476#undef _PACK
    503477}
    504478
Note: See TracChangeset for help on using the changeset viewer.