source: mainline/uspace/srv/net/tl/tcp/ucall.c@ 74c99b5

lfn serial ticket/834-toolchain-update topic/msim-upgrade topic/simplify-dev-export
Last change on this file since 74c99b5 was 74c99b5, checked in by Jiri Svoboda <jiri@…>, 14 years ago

Segments in retransmission queue need to have SEQ set.

  • Property mode set to 100644
File size: 7.1 KB
Line 
1/*
2 * Copyright (c) 2011 Jiri Svoboda
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 *
9 * - Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * - Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * - The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 */
28
29/** @addtogroup tcp
30 * @{
31 */
32
33/**
34 * @file TCP entry points (close to those defined in the RFC)
35 */
36
37#include <fibril_synch.h>
38#include <io/log.h>
39#include <macros.h>
40#include <mem.h>
41#include "conn.h"
42#include "tcp_type.h"
43#include "tqueue.h"
44#include "ucall.h"
45
46/*
47 * User calls
48 */
49
50/** OPEN user call
51 *
52 * @param lsock Local socket
53 * @param fsock Foreign socket
54 * @param acpass Active/passive
55 * @param conn Connection
56 *
57 * Unlike in the spec we allow specifying the local address. This means
58 * the implementation does not need to magically guess it, especially
59 * considering there can be more than one local address.
60 *
61 * XXX We should be able to call active open on an existing listening
62 * connection.
63 * XXX We should be able to get connection structure immediately, before
64 * establishment.
65 */
66tcp_error_t tcp_uc_open(tcp_sock_t *lsock, tcp_sock_t *fsock, acpass_t acpass,
67 tcp_conn_t **conn)
68{
69 tcp_conn_t *nconn;
70
71 log_msg(LVL_DEBUG, "tcp_uc_open(%p, %p, %s, %p)",
72 lsock, fsock, acpass == ap_active ? "active" : "passive",
73 conn);
74
75 nconn = tcp_conn_new(lsock, fsock);
76 tcp_conn_add(nconn);
77
78 if (acpass == ap_active) {
79 /* Synchronize (initiate) connection */
80 tcp_conn_sync(nconn);
81 }
82
83 /* Wait for connection to be established or reset */
84 log_msg(LVL_DEBUG, "tcp_uc_open: Wait for connection.");
85 fibril_mutex_lock(&nconn->cstate_lock);
86 while (nconn->cstate == st_listen ||
87 nconn->cstate == st_syn_sent ||
88 nconn->cstate == st_syn_received) {
89 fibril_condvar_wait(&nconn->cstate_cv, &nconn->cstate_lock);
90 }
91
92 if (nconn->cstate != st_established) {
93 log_msg(LVL_DEBUG, "tcp_uc_open: Connection was reset.");
94 assert(nconn->cstate == st_closed);
95 fibril_mutex_unlock(&nconn->cstate_lock);
96 return TCP_ERESET;
97 }
98
99 fibril_mutex_unlock(&nconn->cstate_lock);
100 log_msg(LVL_DEBUG, "tcp_uc_open: Connection was established.");
101
102 *conn = nconn;
103 return TCP_EOK;
104}
105
106/** SEND user call */
107tcp_error_t tcp_uc_send(tcp_conn_t *conn, void *data, size_t size,
108 xflags_t flags)
109{
110 size_t buf_free;
111 size_t xfer_size;
112
113 log_msg(LVL_DEBUG, "%s: tcp_uc_send()", conn->name);
114
115 if (conn->cstate == st_closed)
116 return TCP_ENOTEXIST;
117
118 if (conn->cstate == st_listen) {
119 /* Change connection to active */
120 tcp_conn_sync(conn);
121 }
122
123 if (conn->snd_buf_fin)
124 return TCP_ECLOSING;
125
126 while (size > 0) {
127 buf_free = conn->snd_buf_size - conn->snd_buf_used;
128 while (buf_free == 0 && !conn->reset)
129 tcp_tqueue_new_data(conn);
130
131 if (conn->reset)
132 return TCP_ERESET;
133
134 xfer_size = min(size, buf_free);
135
136 /* Copy data to buffer */
137 memcpy(conn->snd_buf + conn->snd_buf_used, data, xfer_size);
138 data += xfer_size;
139 conn->snd_buf_used += xfer_size;
140 size -= xfer_size;
141 }
142
143 tcp_tqueue_new_data(conn);
144
145 return TCP_EOK;
146}
147
148/** RECEIVE user call */
149tcp_error_t tcp_uc_receive(tcp_conn_t *conn, void *buf, size_t size,
150 size_t *rcvd, xflags_t *xflags)
151{
152 size_t xfer_size;
153
154 log_msg(LVL_DEBUG, "%s: tcp_uc_receive()", conn->name);
155
156 if (conn->cstate == st_closed)
157 return TCP_ENOTEXIST;
158
159 fibril_mutex_lock(&conn->rcv_buf_lock);
160
161 /* Wait for data to become available */
162 while (conn->rcv_buf_used == 0 && !conn->rcv_buf_fin && !conn->reset) {
163 log_msg(LVL_DEBUG, "tcp_uc_receive() - wait for data");
164 fibril_condvar_wait(&conn->rcv_buf_cv, &conn->rcv_buf_lock);
165 }
166
167 if (conn->rcv_buf_used == 0) {
168 fibril_mutex_unlock(&conn->rcv_buf_lock);
169
170 *rcvd = 0;
171 *xflags = 0;
172
173 if (conn->rcv_buf_fin) {
174 /* End of data, peer closed connection */
175 return TCP_ECLOSING;
176 } else {
177 /* Connection was reset */
178 assert(conn->reset);
179 return TCP_ERESET;
180 }
181 }
182
183 /* Copy data from receive buffer to user buffer */
184 xfer_size = min(size, conn->rcv_buf_used);
185 memcpy(buf, conn->rcv_buf, xfer_size);
186 *rcvd = xfer_size;
187
188 /* Remove data from receive buffer */
189 memmove(conn->rcv_buf, conn->rcv_buf + xfer_size, conn->rcv_buf_used -
190 xfer_size);
191 conn->rcv_buf_used -= xfer_size;
192 conn->rcv_wnd += xfer_size;
193
194 fibril_mutex_unlock(&conn->rcv_buf_lock);
195
196 /* TODO */
197 *xflags = 0;
198
199 /* Send new size of receive window */
200 tcp_tqueue_ctrl_seg(conn, CTL_ACK);
201
202 log_msg(LVL_DEBUG, "%s: tcp_uc_receive() - returning %zu bytes",
203 conn->name, xfer_size);
204
205 return TCP_EOK;
206}
207
208/** CLOSE user call */
209tcp_error_t tcp_uc_close(tcp_conn_t *conn)
210{
211 log_msg(LVL_DEBUG, "%s: tcp_uc_close()", conn->name);
212
213 if (conn->cstate == st_closed)
214 return TCP_ENOTEXIST;
215
216 if (conn->snd_buf_fin)
217 return TCP_ECLOSING;
218
219 conn->snd_buf_fin = true;
220 tcp_tqueue_new_data(conn);
221
222 return TCP_EOK;
223}
224
225/** ABORT user call */
226void tcp_uc_abort(tcp_conn_t *conn)
227{
228 log_msg(LVL_DEBUG, "tcp_uc_abort()");
229}
230
231/** STATUS user call */
232void tcp_uc_status(tcp_conn_t *conn, tcp_conn_status_t *cstatus)
233{
234 log_msg(LVL_DEBUG, "tcp_uc_status()");
235}
236
237
238/*
239 * Arriving segments
240 */
241
242/** Segment arrived */
243void tcp_as_segment_arrived(tcp_sockpair_t *sp, tcp_segment_t *seg)
244{
245 tcp_conn_t *conn;
246
247 log_msg(LVL_DEBUG, "tcp_as_segment_arrived(f:(%x,%u), l:(%x,%u))",
248 sp->foreign.addr.ipv4, sp->foreign.port,
249 sp->local.addr.ipv4, sp->local.port);
250
251 conn = tcp_conn_find(sp);
252 if (conn != NULL && conn->cstate != st_closed) {
253 if (conn->ident.foreign.addr.ipv4 == TCP_IPV4_ANY)
254 conn->ident.foreign.addr.ipv4 = sp->foreign.addr.ipv4;
255 if (conn->ident.foreign.port == TCP_PORT_ANY)
256 conn->ident.foreign.port = sp->foreign.port;
257 if (conn->ident.local.addr.ipv4 == TCP_IPV4_ANY)
258 conn->ident.local.addr.ipv4 = sp->local.addr.ipv4;
259
260 tcp_conn_segment_arrived(conn, seg);
261 } else {
262 if (conn == NULL)
263 log_msg(LVL_WARN, "No connection found.");
264 else
265 log_msg(LVL_WARN, "Connection is closed.");
266 tcp_unexpected_segment(sp, seg);
267 }
268}
269
270/*
271 * Timeouts
272 */
273
274/** User timeout */
275void tcp_to_user(void)
276{
277 log_msg(LVL_DEBUG, "tcp_to_user()");
278}
279
280/**
281 * @}
282 */
Note: See TracBrowser for help on using the repository browser.