source: mainline/uspace/srv/hw/netif/dp8390/dp8390_module.c@ f772bc55

lfn serial ticket/834-toolchain-update topic/msim-upgrade topic/simplify-dev-export
Last change on this file since f772bc55 was f772bc55, checked in by Jiri Svoboda <jiri@…>, 15 years ago

Remove xxx_ref typedefs (part 2).
  • Property mode set to 100644
File size: 9.4 KB
Line 
1/*
2 * Copyright (c) 2009 Lukas Mejdrech
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 *
9 * - Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * - Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * - The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 */
28
29/** @addtogroup dp8390
30 * @{
31 */
32
33/** @file
34 * DP8390 network interface implementation.
35 */
36
37#include <assert.h>
38#include <async.h>
39#include <ddi.h>
40#include <errno.h>
41#include <err.h>
42#include <malloc.h>
43#include <ipc/ipc.h>
44#include <ipc/services.h>
45
46#include <net/modules.h>
47#include <packet_client.h>
48#include <adt/measured_strings.h>
49#include <net/device.h>
50#include <nil_interface.h>
51#include <netif_interface.h>
52#include <netif_local.h>
53
54#include "dp8390.h"
55#include "dp8390_drv.h"
56#include "dp8390_port.h"
57
58/** DP8390 module name.
59 */
60#define NAME "dp8390"
61
62/** Returns the device from the interrupt call.
63 * @param[in] call The interrupt call.
64 */
65#define IRQ_GET_DEVICE(call) (device_id_t) IPC_GET_METHOD(*call)
66
67/** Returns the interrupt status register from the interrupt call.
68 * @param[in] call The interrupt call.
69 */
70#define IPC_GET_ISR(call) (int) IPC_GET_ARG2(*call)
71
72/** DP8390 kernel interrupt command sequence.
73 */
74static irq_cmd_t dp8390_cmds[] = {
75 { .cmd = CMD_PIO_READ_8,
76 .addr = NULL,
77 .dstarg = 2
78 },
79 {
80 .cmd = CMD_PREDICATE,
81 .value = 1,
82 .srcarg = 2
83 },
84 {
85 .cmd = CMD_ACCEPT
86 }
87};
88
89/** DP8390 kernel interrupt code.
90 */
91static irq_code_t dp8390_code = {
92 sizeof(dp8390_cmds) / sizeof(irq_cmd_t),
93 dp8390_cmds
94};
95
96/** Handles the interrupt messages.
97 * This is the interrupt handler callback function.
98 * @param[in] iid The interrupt message identifier.
99 * @param[in] call The interrupt message.
100 */
101static void irq_handler(ipc_callid_t iid, ipc_call_t * call)
102{
103 netif_device_t * device;
104 dpeth_t * dep;
105 packet_t received;
106 device_id_t device_id;
107 int phone;
108
109 device_id = IRQ_GET_DEVICE(call);
110 fibril_rwlock_write_lock(&netif_globals.lock);
111 if(find_device(device_id, &device) != EOK){
112 fibril_rwlock_write_unlock(&netif_globals.lock);
113 return;
114 }
115 dep = (dpeth_t *) device->specific;
116 if (dep->de_mode != DEM_ENABLED){
117 fibril_rwlock_write_unlock(&netif_globals.lock);
118 return;
119 }
120 assert(dep->de_flags &DEF_ENABLED);
121 dep->de_int_pending = 0;
122 dp_check_ints(dep, IPC_GET_ISR(call));
123 if(dep->received_queue){
124 received = dep->received_queue;
125 phone = device->nil_phone;
126 dep->received_queue = NULL;
127 dep->received_count = 0;
128 fibril_rwlock_write_unlock(&netif_globals.lock);
129 nil_received_msg(phone, device_id, received, NULL);
130 }else{
131 fibril_rwlock_write_unlock(&netif_globals.lock);
132 }
133 ipc_answer_0(iid, EOK);
134}
135
136/** Changes the network interface state.
137 * @param[in,out] device The network interface.
138 * @param[in] state The new state.
139 * @returns The new state.
140 */
141static int change_state(netif_device_t * device, device_state_t state)
142{
143 if (device->state != state) {
144 device->state = state;
145
146 printf("%s: State changed to %s\n", NAME,
147 (state == NETIF_ACTIVE) ? "active" : "stopped");
148
149 return state;
150 }
151
152 return EOK;
153}
154
155int netif_specific_message(ipc_callid_t callid, ipc_call_t * call, ipc_call_t * answer, int * answer_count){
156 return ENOTSUP;
157}
158
159int netif_get_device_stats(device_id_t device_id, device_stats_t *stats)
160{
161 netif_device_t * device;
162 eth_stat_t * de_stat;
163 int rc;
164
165 if(! stats){
166 return EBADMEM;
167 }
168 rc = find_device(device_id, &device);
169 if (rc != EOK)
170 return rc;
171 de_stat = &((dpeth_t *) device->specific)->de_stat;
172 null_device_stats(stats);
173 stats->receive_errors = de_stat->ets_recvErr;
174 stats->send_errors = de_stat->ets_sendErr;
175 stats->receive_crc_errors = de_stat->ets_CRCerr;
176 stats->receive_frame_errors = de_stat->ets_frameAll;
177 stats->receive_missed_errors = de_stat->ets_missedP;
178 stats->receive_packets = de_stat->ets_packetR;
179 stats->send_packets = de_stat->ets_packetT;
180 stats->collisions = de_stat->ets_collision;
181 stats->send_aborted_errors = de_stat->ets_transAb;
182 stats->send_carrier_errors = de_stat->ets_carrSense;
183 stats->send_heartbeat_errors = de_stat->ets_CDheartbeat;
184 stats->send_window_errors = de_stat->ets_OWC;
185 return EOK;
186}
187
188int netif_get_addr_message(device_id_t device_id, measured_string_ref address){
189 netif_device_t * device;
190 int rc;
191
192 if(! address){
193 return EBADMEM;
194 }
195 rc = find_device(device_id, &device);
196 if (rc != EOK)
197 return rc;
198 address->value = (char *) (&((dpeth_t *) device->specific)->de_address);
199 address->length = CONVERT_SIZE(ether_addr_t, char, 1);
200 return EOK;
201}
202
203
204
205int netif_probe_message(device_id_t device_id, int irq, uintptr_t io){
206 netif_device_t * device;
207 dpeth_t * dep;
208 int rc;
209
210 device = (netif_device_t *) malloc(sizeof(netif_device_t));
211 if(! device){
212 return ENOMEM;
213 }
214 dep = (dpeth_t *) malloc(sizeof(dpeth_t));
215 if(! dep){
216 free(device);
217 return ENOMEM;
218 }
219 bzero(device, sizeof(netif_device_t));
220 bzero(dep, sizeof(dpeth_t));
221 device->device_id = device_id;
222 device->nil_phone = -1;
223 device->specific = (void *) dep;
224 device->state = NETIF_STOPPED;
225 dep->de_irq = irq;
226 dep->de_mode = DEM_DISABLED;
227 //TODO address?
228 rc = pio_enable((void *) io, DP8390_IO_SIZE, (void **) &dep->de_base_port);
229 if (rc != EOK) {
230 free(dep);
231 free(device);
232 return rc;
233 }
234 rc = do_probe(dep);
235 if (rc != EOK) {
236 free(dep);
237 free(device);
238 return rc;
239 }
240 rc = netif_device_map_add(&netif_globals.device_map, device->device_id, device);
241 if (rc != EOK){
242 free(dep);
243 free(device);
244 return rc;
245 }
246 return EOK;
247}
248
249int netif_send_message(device_id_t device_id, packet_t packet, services_t sender){
250 netif_device_t * device;
251 dpeth_t * dep;
252 packet_t next;
253 int rc;
254
255 rc = find_device(device_id, &device);
256 if (rc != EOK)
257 return rc;
258 if(device->state != NETIF_ACTIVE){
259 netif_pq_release(packet_get_id(packet));
260 return EFORWARD;
261 }
262 dep = (dpeth_t *) device->specific;
263 // process packet queue
264 do{
265 next = pq_detach(packet);
266 if(do_pwrite(dep, packet, FALSE) != EBUSY){
267 netif_pq_release(packet_get_id(packet));
268 }
269 packet = next;
270 }while(packet);
271 return EOK;
272}
273
274int netif_start_message(netif_device_t * device){
275 dpeth_t * dep;
276 int rc;
277
278 if(device->state != NETIF_ACTIVE){
279 dep = (dpeth_t *) device->specific;
280 dp8390_cmds[0].addr = (void *) (uintptr_t) (dep->de_dp8390_port + DP_ISR);
281 dp8390_cmds[2].addr = dp8390_cmds[0].addr;
282 rc = ipc_register_irq(dep->de_irq, device->device_id, device->device_id, &dp8390_code);
283 if (rc != EOK)
284 return rc;
285 rc = do_init(dep, DL_BROAD_REQ);
286 if (rc != EOK) {
287 ipc_unregister_irq(dep->de_irq, device->device_id);
288 return rc;
289 }
290 return change_state(device, NETIF_ACTIVE);
291 }
292 return EOK;
293}
294
295int netif_stop_message(netif_device_t * device){
296 dpeth_t * dep;
297
298 if(device->state != NETIF_STOPPED){
299 dep = (dpeth_t *) device->specific;
300 do_stop(dep);
301 ipc_unregister_irq(dep->de_irq, device->device_id);
302 return change_state(device, NETIF_STOPPED);
303 }
304 return EOK;
305}
306
307int netif_initialize(void){
308 ipcarg_t phonehash;
309
310 async_set_interrupt_received(irq_handler);
311
312 return REGISTER_ME(SERVICE_DP8390, &phonehash);
313}
314
315/** Default thread for new connections.
316 *
317 * @param[in] iid The initial message identifier.
318 * @param[in] icall The initial message call structure.
319 *
320 */
321static void netif_client_connection(ipc_callid_t iid, ipc_call_t * icall)
322{
323 /*
324 * Accept the connection
325 * - Answer the first IPC_M_CONNECT_ME_TO call.
326 */
327 ipc_answer_0(iid, EOK);
328
329 while(true) {
330 ipc_call_t answer;
331 int answer_count;
332
333 /* Clear the answer structure */
334 refresh_answer(&answer, &answer_count);
335
336 /* Fetch the next message */
337 ipc_call_t call;
338 ipc_callid_t callid = async_get_call(&call);
339
340 /* Process the message */
341 int res = netif_module_message(NAME, callid, &call, &answer,
342 &answer_count);
343
344 /* End if said to either by the message or the processing result */
345 if ((IPC_GET_METHOD(call) == IPC_M_PHONE_HUNGUP) || (res == EHANGUP))
346 return;
347
348 /* Answer the message */
349 answer_call(callid, res, &answer, answer_count);
350 }
351}
352
353/** Starts the module.
354 *
355 * @param argc The count of the command line arguments. Ignored parameter.
356 * @param argv The command line parameters. Ignored parameter.
357 *
358 * @returns EOK on success.
359 * @returns Other error codes as defined for each specific module start function.
360 *
361 */
362int main(int argc, char *argv[])
363{
364 int rc;
365
366 /* Start the module */
367 rc = netif_module_start(netif_client_connection);
368 return rc;
369}
370
371/** @}
372 */
Note: See TracBrowser for help on using the repository browser.