/* * Copyright (c) 2006 Josef Cejka * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * - Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * - Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * - The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /** @addtogroup kbd_port * @ingroup kbd * @{ */ /** @file * @brief NS16550 port driver. */ #include #include #include #include #include #include #include #include /* NS16550 registers */ #define RBR_REG 0 /** Receiver Buffer Register. */ #define IER_REG 1 /** Interrupt Enable Register. */ #define IIR_REG 2 /** Interrupt Ident Register (read). */ #define FCR_REG 2 /** FIFO control register (write). */ #define LCR_REG 3 /** Line Control register. */ #define MCR_REG 4 /** Modem Control Register. */ #define LSR_REG 5 /** Line Status Register. */ #define LSR_DATA_READY 0x01 static irq_cmd_t ns16550_cmds[] = { { .cmd = CMD_PIO_READ_8, .addr = (void *) 0, /* Will be patched in run-time */ .dstarg = 1 }, { .cmd = CMD_BTEST, .value = LSR_DATA_READY, .srcarg = 1, .dstarg = 3 }, { .cmd = CMD_PREDICATE, .value = 2, .srcarg = 3 }, { .cmd = CMD_PIO_READ_8, .addr = (void *) 0, /* Will be patched in run-time */ .dstarg = 2 }, { .cmd = CMD_ACCEPT } }; irq_code_t ns16550_kbd = { sizeof(ns16550_cmds) / sizeof(irq_cmd_t), ns16550_cmds }; static void ns16550_irq_handler(ipc_callid_t iid, ipc_call_t *call); static uintptr_t ns16550_physical; static uintptr_t ns16550_kernel; int ns16550_port_init(void) { void *vaddr; if (sysinfo_get_value("kbd.address.physical", &ns16550_physical) != EOK) return -1; if (sysinfo_get_value("kbd.address.kernel", &ns16550_kernel) != EOK) return -1; sysarg_t inr; if (sysinfo_get_value("kbd.inr", &inr) != EOK) return -1; ns16550_kbd.cmds[0].addr = (void *) (ns16550_kernel + LSR_REG); ns16550_kbd.cmds[3].addr = (void *) (ns16550_kernel + RBR_REG); async_set_interrupt_received(ns16550_irq_handler); ipc_register_irq(inr, device_assign_devno(), inr, &ns16550_kbd); return pio_enable((void *) ns16550_physical, 8, &vaddr); } static void ns16550_irq_handler(ipc_callid_t iid, ipc_call_t *call) { int scan_code = IPC_GET_ARG2(*call); kbd_push_scancode(scan_code); if (cir_service) async_msg_1(cir_phone, IRC_CLEAR_INTERRUPT, IPC_GET_IMETHOD(*call)); } /** * @} */