source: mainline/uspace/srv/hid/kbd/port/gxemul.c@ b1bdc7a4

lfn serial ticket/834-toolchain-update topic/msim-upgrade topic/simplify-dev-export
Last change on this file since b1bdc7a4 was b1bdc7a4, checked in by Jiri Svoboda <jiri@…>, 15 years ago

Control keyboard port modules through ops structures. Allows compiling in
all modules at the same time.

  • Property mode set to 100644
File size: 3.1 KB
Line 
1/*
2 * Copyright (c) 2007 Michal Kebrt
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 *
9 * - Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * - Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * - The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 */
28
29/** @addtogroup kbd_port
30 * @{
31 * @ingroup kbd
32 */
33/** @file
34 * @brief GXEmul keyboard port driver.
35 */
36
37#include <async.h>
38#include <sysinfo.h>
39#include <kbd_port.h>
40#include <kbd.h>
41#include <ddi.h>
42#include <errno.h>
43
44static int gxemul_port_init(void);
45static void gxemul_port_yield(void);
46static void gxemul_port_reclaim(void);
47static void gxemul_port_write(uint8_t data);
48
49kbd_port_ops_t gxemul_port = {
50 .init = gxemul_port_init,
51 .yield = gxemul_port_yield,
52 .reclaim = gxemul_port_reclaim,
53 .write = gxemul_port_write
54};
55
56static irq_cmd_t gxemul_cmds[] = {
57 {
58 .cmd = CMD_PIO_READ_8,
59 .addr = (void *) 0, /* will be patched in run-time */
60 .dstarg = 2,
61 },
62 {
63 .cmd = CMD_ACCEPT
64 }
65};
66
67static irq_code_t gxemul_kbd = {
68 sizeof(gxemul_cmds) / sizeof(irq_cmd_t),
69 gxemul_cmds
70};
71
72static void gxemul_irq_handler(ipc_callid_t iid, ipc_call_t *call);
73
74/** Initializes keyboard handler. */
75static int gxemul_port_init(void)
76{
77 sysarg_t addr;
78 if (sysinfo_get_value("kbd.address.virtual", &addr) != EOK)
79 return -1;
80
81 sysarg_t inr;
82 if (sysinfo_get_value("kbd.inr", &inr) != EOK)
83 return -1;
84
85 async_set_interrupt_received(gxemul_irq_handler);
86 gxemul_cmds[0].addr = (void *) addr;
87 register_irq(inr, device_assign_devno(), 0, &gxemul_kbd);
88 return 0;
89}
90
91static void gxemul_port_yield(void)
92{
93}
94
95static void gxemul_port_reclaim(void)
96{
97}
98
99static void gxemul_port_write(uint8_t data)
100{
101 (void) data;
102}
103
104/** Process data sent when a key is pressed.
105 *
106 * @param keybuffer Buffer of pressed keys.
107 * @param call IPC call.
108 *
109 * @return Always 1.
110 */
111static void gxemul_irq_handler(ipc_callid_t iid, ipc_call_t *call)
112{
113 int scan_code = IPC_GET_ARG2(*call);
114
115 kbd_push_scancode(scan_code);
116}
117
118/** @}
119 */
Note: See TracBrowser for help on using the repository browser.