source: mainline/uspace/srv/bd/hr/raid1.c@ dbd91da

Last change on this file since dbd91da was dbd91da, checked in by Miroslav Cimerman <mc@…>, 10 months ago

hr: remake structures to include extent status

Also rename .devs → .extents in hr_volume_t and when printing status,
display each extent status, and parity disk when array is of type RAID4.

  • Property mode set to 100644
File size: 5.0 KB
Line 
1/*
2 * Copyright (c) 2024 Miroslav Cimerman
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 *
9 * - Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * - Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * - The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 */
28
29/** @addtogroup hr
30 * @{
31 */
32/**
33 * @file
34 */
35
36#include <bd_srv.h>
37#include <block.h>
38#include <errno.h>
39#include <hr.h>
40#include <io/log.h>
41#include <ipc/hr.h>
42#include <ipc/services.h>
43#include <loc.h>
44#include <task.h>
45#include <stdio.h>
46#include <stdlib.h>
47#include <str_error.h>
48
49#include "util.h"
50#include "var.h"
51
52extern fibril_mutex_t big_lock;
53extern loc_srv_t *hr_srv;
54
55static errno_t hr_raid1_bd_open(bd_srvs_t *, bd_srv_t *);
56static errno_t hr_raid1_bd_close(bd_srv_t *);
57static errno_t hr_raid1_bd_read_blocks(bd_srv_t *, aoff64_t, size_t, void *,
58 size_t);
59static errno_t hr_raid1_bd_sync_cache(bd_srv_t *, aoff64_t, size_t);
60static errno_t hr_raid1_bd_write_blocks(bd_srv_t *, aoff64_t, size_t,
61 const void *, size_t);
62static errno_t hr_raid1_bd_get_block_size(bd_srv_t *, size_t *);
63static errno_t hr_raid1_bd_get_num_blocks(bd_srv_t *, aoff64_t *);
64
65static bd_ops_t hr_raid1_bd_ops = {
66 .open = hr_raid1_bd_open,
67 .close = hr_raid1_bd_close,
68 .sync_cache = hr_raid1_bd_sync_cache,
69 .read_blocks = hr_raid1_bd_read_blocks,
70 .write_blocks = hr_raid1_bd_write_blocks,
71 .get_block_size = hr_raid1_bd_get_block_size,
72 .get_num_blocks = hr_raid1_bd_get_num_blocks
73};
74
75static errno_t hr_raid1_bd_open(bd_srvs_t *bds, bd_srv_t *bd)
76{
77 log_msg(LOG_DEFAULT, LVL_NOTE, "hr_bd_open()");
78 return EOK;
79}
80
81static errno_t hr_raid1_bd_close(bd_srv_t *bd)
82{
83 log_msg(LOG_DEFAULT, LVL_NOTE, "hr_bd_close()");
84 return EOK;
85}
86
87static errno_t hr_raid1_bd_sync_cache(bd_srv_t *bd, aoff64_t ba, size_t cnt)
88{
89 hr_volume_t *vol = bd->srvs->sarg;
90
91 errno_t rc;
92 size_t i;
93
94 rc = hr_check_ba_range(vol, cnt, ba);
95 if (rc != EOK)
96 return rc;
97
98 hr_add_ba_offset(vol, &ba);
99
100 fibril_mutex_lock(&big_lock);
101
102 for (i = 0; i < vol->dev_no; i++) {
103 rc = block_sync_cache(vol->extents[i].svc_id, ba, cnt);
104 if (rc != EOK)
105 break;
106 }
107
108 fibril_mutex_unlock(&big_lock);
109 return rc;
110}
111
112static errno_t hr_raid1_bd_read_blocks(bd_srv_t *bd, aoff64_t ba, size_t cnt,
113 void *buf, size_t size)
114{
115 hr_volume_t *vol = bd->srvs->sarg;
116
117 errno_t rc;
118 size_t i;
119
120 rc = hr_check_ba_range(vol, cnt, ba);
121 if (rc != EOK)
122 return rc;
123
124 hr_add_ba_offset(vol, &ba);
125
126 fibril_mutex_lock(&big_lock);
127
128 for (i = 0; i < vol->dev_no; i++) {
129 rc = block_read_direct(vol->extents[i].svc_id, ba, cnt, buf);
130 if (rc != EOK)
131 break;
132 }
133
134 fibril_mutex_unlock(&big_lock);
135 return rc;
136}
137
138static errno_t hr_raid1_bd_write_blocks(bd_srv_t *bd, aoff64_t ba, size_t cnt,
139 const void *data, size_t size)
140{
141 hr_volume_t *vol = bd->srvs->sarg;
142
143 errno_t rc;
144 size_t i;
145
146 rc = hr_check_ba_range(vol, cnt, ba);
147 if (rc != EOK)
148 return rc;
149
150 hr_add_ba_offset(vol, &ba);
151
152 fibril_mutex_lock(&big_lock);
153
154 for (i = 0; i < vol->dev_no; i++) {
155 rc = block_write_direct(vol->extents[i].svc_id, ba, cnt, data);
156 if (rc != EOK)
157 break;
158 }
159
160 fibril_mutex_unlock(&big_lock);
161 return rc;
162}
163
164static errno_t hr_raid1_bd_get_block_size(bd_srv_t *bd, size_t *rsize)
165{
166 hr_volume_t *vol = bd->srvs->sarg;
167
168 *rsize = vol->bsize;
169 return EOK;
170}
171
172static errno_t hr_raid1_bd_get_num_blocks(bd_srv_t *bd, aoff64_t *rnb)
173{
174 hr_volume_t *vol = bd->srvs->sarg;
175
176 *rnb = vol->data_blkno;
177 return EOK;
178}
179
180errno_t hr_raid1_create(hr_volume_t *new_volume)
181{
182 errno_t rc;
183
184 assert(new_volume->level == hr_l_1);
185
186 if (new_volume->dev_no < 2) {
187 log_msg(LOG_DEFAULT, LVL_ERROR,
188 "RAID 1 array needs at least 2 devices");
189 return EINVAL;
190 }
191
192 bd_srvs_init(&new_volume->hr_bds);
193 new_volume->hr_bds.ops = &hr_raid1_bd_ops;
194 new_volume->hr_bds.sarg = new_volume;
195
196 rc = hr_register_volume(new_volume);
197 if (rc != EOK)
198 return rc;
199
200 return EOK;
201}
202
203/** @}
204 */
Note: See TracBrowser for help on using the repository browser.