source: mainline/uspace/lib/usbvirt/src/stdreq.c@ d93f5afb

/*
 * Copyright (c) 2011 Vojtech Horky
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * - Redistributions of source code must retain the above copyright
 *   notice, this list of conditions and the following disclaimer.
 * - Redistributions in binary form must reproduce the above copyright
 *   notice, this list of conditions and the following disclaimer in the
 *   documentation and/or other materials provided with the distribution.
 * - The name of the author may not be used to endorse or promote products
 *   derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/** @addtogroup libusbvirt
 * @{
 */
/** @file
 * Standard control request handlers.
 */
#include "private.h"
#include <usb/dev/request.h>
#include <assert.h>
#include <errno.h>

/** Helper for replying to control read transfer from virtual USB device.
 *
 * This function takes care of copying data to answer buffer taking care
 * of buffer sizes properly.
 *
 * @param setup_packet The setup packet.
 * @param data Data buffer to write to.
 * @param act_size Where to write actual size of returned data.
 * @param actual_data Data to be returned.
 * @param actual_data_size Size of answer data (@p actual_data) in bytes.
 */
void usbvirt_control_reply_helper(const usb_device_request_setup_packet_t *setup_packet,
    uint8_t *data, size_t *act_size,
    const void *actual_data, size_t actual_data_size)
{
        size_t expected_size = setup_packet->length;
        if (expected_size < actual_data_size) {
                actual_data_size = expected_size;
        }

        memcpy(data, actual_data, actual_data_size);

        if (act_size != NULL) {
                *act_size = actual_data_size;
        }
}

/** NOP handler */
int req_nop(usbvirt_device_t *device,
    const usb_device_request_setup_packet_t *setup_packet,
    uint8_t *data, size_t *act_size)
{
        return EOK;
}

/** GET_DESCRIPTOR handler. */
static int req_get_descriptor(usbvirt_device_t *device,
    const usb_device_request_setup_packet_t *setup_packet, uint8_t *data, size_t *act_size)
{
        uint8_t type = setup_packet->value_high;
        uint8_t index = setup_packet->value_low;

        /*
         * Standard device descriptor.
         */
        if ((type == USB_DESCTYPE_DEVICE) && (index == 0)) {
                if (device->descriptors && device->descriptors->device) {
                        usbvirt_control_reply_helper(setup_packet, data, act_size,
                            device->descriptors->device,
                            device->descriptors->device->length);
                        return EOK;
                } else {
                        return EFORWARD;
                }
        }

        /*
         * Configuration descriptor together with interface, endpoint and
         * class-specific descriptors.
         */
        if (type == USB_DESCTYPE_CONFIGURATION) {
                if (!device->descriptors) {
                        return EFORWARD;
                }
                if (index >= device->descriptors->configuration_count) {
                        return EFORWARD;
                }
                /* Copy the data. */
                const usbvirt_device_configuration_t *config =
                    &device->descriptors->configuration[index];
                uint8_t *all_data = malloc(config->descriptor->total_length);
                if (all_data == NULL) {
                        return ENOMEM;
                }

                uint8_t *ptr = all_data;
                memcpy(ptr, config->descriptor, config->descriptor->length);
                ptr += config->descriptor->length;
                size_t i;
                for (i = 0; i < config->extra_count; i++) {
                        const usbvirt_device_configuration_extras_t *extra
                            = &config->extra[i];
                        memcpy(ptr, extra->data, extra->length);
                        ptr += extra->length;
                }

                usbvirt_control_reply_helper(setup_packet, data, act_size,
                    all_data, config->descriptor->total_length);

                free(all_data);

                return EOK;
        }

        return EFORWARD;
}

static int req_set_address(usbvirt_device_t *device,
    const usb_device_request_setup_packet_t *setup_packet, uint8_t *data, size_t *act_size)
{
        uint16_t new_address = setup_packet->value;
        uint16_t zero1 = setup_packet->index;
        uint16_t zero2 = setup_packet->length;

        if ((zero1 != 0) || (zero2 != 0)) {
                return EINVAL;
        }

        if (new_address > 127) {
                return EINVAL;
        }

        device->address = new_address;

        return EOK;
}

static int req_set_configuration(usbvirt_device_t *device,
    const usb_device_request_setup_packet_t *setup_packet, uint8_t *data, size_t *act_size)
{
        uint16_t configuration_value = setup_packet->value;
        uint16_t zero1 = setup_packet->index;
        uint16_t zero2 = setup_packet->length;

        if ((zero1 != 0) || (zero2 != 0)) {
                return EINVAL;
        }

        /*
         * Configuration value is 1 byte information.
         */
        if (configuration_value > 255) {
                return EINVAL;
        }

        /*
         * Do nothing when in default state. According to specification,
         * this is not specified.
         */
        if (device->state == USBVIRT_STATE_DEFAULT) {
                return EOK;
        }

        usbvirt_device_state_t new_state;
        if (configuration_value == 0) {
                new_state = USBVIRT_STATE_ADDRESS;
        } else {
                // FIXME: check that this configuration exists
                new_state = USBVIRT_STATE_CONFIGURED;
        }

        if (device->ops && device->ops->state_changed) {
                device->ops->state_changed(device, device->state, new_state);
        }
        device->state = new_state;

        return EOK;
}

static int req_get_dev_status(usbvirt_device_t *device,
    const usb_device_request_setup_packet_t *setup_packet, uint8_t *data, size_t *act_size)
{
        if (setup_packet->length != 2)
                return ESTALL;
        data[0] = (device->self_powered ? 1 : 0) | (device->remote_wakeup ? 2 : 0);
        data[1] = 0;
        *act_size = 2;
        return EOK;
}
static int req_get_iface_ep_status(usbvirt_device_t *device,
    const usb_device_request_setup_packet_t *setup_packet, uint8_t *data, size_t *act_size)
{
        if (setup_packet->length != 2)
                return ESTALL;
        data[0] = 0;
        data[1] = 0;
        *act_size = 2;
        return EOK;
}

/** Standard request handlers. */
usbvirt_control_request_handler_t library_handlers[] = {
        {
                STD_REQ_OUT(USB_REQUEST_RECIPIENT_DEVICE, USB_DEVREQ_SET_ADDRESS),
                .name = "SetAddress",
                .callback = req_set_address
        },
        {
                STD_REQ_IN(USB_REQUEST_RECIPIENT_DEVICE, USB_DEVREQ_GET_DESCRIPTOR),
                .name = "GetDescriptor",
                .callback = req_get_descriptor
        },
        {
                STD_REQ_OUT(USB_REQUEST_RECIPIENT_DEVICE, USB_DEVREQ_SET_CONFIGURATION),
                .name = "SetConfiguration",
                .callback = req_set_configuration
        },
        {
                STD_REQ_IN(USB_REQUEST_RECIPIENT_DEVICE, USB_DEVREQ_GET_STATUS),
                .name = "GetDeviceStatus",
                .callback = req_get_dev_status,
        },
        {
                STD_REQ_IN(USB_REQUEST_RECIPIENT_INTERFACE, USB_DEVREQ_GET_STATUS),
                .name = "GetInterfaceStatus",
                .callback = req_get_iface_ep_status,
        },
        {
                /* virtual EPs by default cannot be stalled */
                STD_REQ_IN(USB_REQUEST_RECIPIENT_ENDPOINT, USB_DEVREQ_GET_STATUS),
                .name = "GetEndpointStatus",
                .callback = req_get_iface_ep_status,
        },
        { .callback = NULL }
};

/**
 * @}
 */