source: mainline/uspace/lib/usbvirt/src/ipc_hc.c@ 3495654

/*
 * Copyright (c) 2011 Vojtech Horky
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * - Redistributions of source code must retain the above copyright
 *   notice, this list of conditions and the following disclaimer.
 * - Redistributions in binary form must reproduce the above copyright
 *   notice, this list of conditions and the following disclaimer in the
 *   documentation and/or other materials provided with the distribution.
 * - The name of the author may not be used to endorse or promote products
 *   derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/** @addtogroup libusbvirt
 * @{
 */
/** @file
 * IPC wrappers, host controller side.
 */
#include <errno.h>
#include <str.h>
#include <stdio.h>
#include <assert.h>
#include <async.h>
#include <usbvirt/device.h>
#include <usbvirt/ipc.h>
#include <usb/debug.h>

/** Send control read transfer to virtual USB device.
 *
 * @param sess Session to the virtual device.
 * @param ep Target endpoint number.
 * @param setup_buffer Setup buffer.
 * @param setup_buffer_size Setup buffer size in bytes.
 * @param data_buffer Data buffer (DATA stage of control transfer).
 * @param data_buffer_size Size of data buffer in bytes.
 * @param data_transfered_size Number of actually transferred bytes.
 *
 * @return Error code.
 *
 */
int usbvirt_ipc_send_control_read(async_sess_t *sess, void *setup_buffer,
    size_t setup_buffer_size, void *data_buffer, size_t data_buffer_size,
    size_t *data_transfered_size)
{
        if (!sess)
                return EINVAL;
        
        if ((setup_buffer == NULL) || (setup_buffer_size == 0))
                return EINVAL;
        
        if ((data_buffer == NULL) || (data_buffer_size == 0))
                return EINVAL;
        
        async_exch_t *exch = async_exchange_begin(sess);
        
        aid_t opening_request = async_send_0(exch, IPC_M_USBVIRT_CONTROL_READ,
            NULL);
        if (opening_request == 0) {
                async_exchange_end(exch);
                return ENOMEM;
        }
        
        int rc = async_data_write_start(exch, setup_buffer, setup_buffer_size);
        if (rc != EOK) {
                async_exchange_end(exch);
                async_forget(opening_request);
                return rc;
        }
        
        ipc_call_t data_request_call;
        aid_t data_request = async_data_read(exch, data_buffer, data_buffer_size,
            &data_request_call);
        
        async_exchange_end(exch);
        
        if (data_request == 0) {
                async_forget(opening_request);
                return ENOMEM;
        }
        
        sysarg_t data_request_rc;
        sysarg_t opening_request_rc;
        async_wait_for(data_request, &data_request_rc);
        async_wait_for(opening_request, &opening_request_rc);
        
        if (data_request_rc != EOK) {
                /* Prefer the return code of the opening request. */
                if (opening_request_rc != EOK)
                        return (int) opening_request_rc;
                else
                        return (int) data_request_rc;
        }
        
        if (opening_request_rc != EOK)
                return (int) opening_request_rc;
        
        if (data_transfered_size != NULL)
                *data_transfered_size = IPC_GET_ARG2(data_request_call);
        
        return EOK;
}

/** Send control write transfer to virtual USB device.
 *
 * @param sess Session to the virtual device.
 * @param ep Target endpoint number.
 * @param setup_buffer Setup buffer.
 * @param setup_buffer_size Setup buffer size in bytes.
 * @param data_buffer Data buffer (DATA stage of control transfer).
 * @param data_buffer_size Size of data buffer in bytes.
 *
 * @return Error code.
 *
 */
int usbvirt_ipc_send_control_write(async_sess_t *sess, void *setup_buffer,
    size_t setup_buffer_size, void *data_buffer, size_t data_buffer_size)
{
        if (!sess)
                return EINVAL;
        
        if ((setup_buffer == NULL) || (setup_buffer_size == 0))
                return EINVAL;
        
        if ((data_buffer_size > 0) && (data_buffer == NULL))
                return EINVAL;
        
        async_exch_t *exch = async_exchange_begin(sess);
        
        aid_t opening_request = async_send_1(exch, IPC_M_USBVIRT_CONTROL_WRITE,
            data_buffer_size, NULL);
        if (opening_request == 0) {
                async_exchange_end(exch);
                return ENOMEM;
        }
        
        int rc = async_data_write_start(exch, setup_buffer, setup_buffer_size);
        if (rc != EOK) {
                async_exchange_end(exch);
                async_forget(opening_request);
                return rc;
        }
        
        if (data_buffer_size > 0) {
                rc = async_data_write_start(exch, data_buffer, data_buffer_size);
                if (rc != EOK) {
                        async_exchange_end(exch);
                        async_forget(opening_request);
                        return rc;
                }
        }
        
        async_exchange_end(exch);
        
        sysarg_t opening_request_rc;
        async_wait_for(opening_request, &opening_request_rc);
        
        return (int) opening_request_rc;
}

/** Request data transfer from virtual USB device.
 *
 * @param sess Session to the virtual device.
 * @param ep Target endpoint number.
 * @param tr_type Transfer type (interrupt or bulk).
 * @param data Data buffer.
 * @param data_size Size of the data buffer in bytes.
 * @param act_size Number of actually returned bytes.
 *
 * @return Error code.
 *
 */
int usbvirt_ipc_send_data_in(async_sess_t *sess, usb_endpoint_t ep,
    usb_transfer_type_t tr_type, void *data, size_t data_size, size_t *act_size)
{
        if (!sess)
                return EINVAL;
        
        usbvirt_hc_to_device_method_t method;
        
        switch (tr_type) {
        case USB_TRANSFER_INTERRUPT:
                method = IPC_M_USBVIRT_INTERRUPT_IN;
                break;
        case USB_TRANSFER_BULK:
                method = IPC_M_USBVIRT_BULK_IN;
                break;
        default:
                return EINVAL;
        }
        
        if ((ep <= 0) || (ep >= USBVIRT_ENDPOINT_MAX))
                return EINVAL;
        
        if ((data == NULL) || (data_size == 0))
                return EINVAL;
        
        async_exch_t *exch = async_exchange_begin(sess);
        
        aid_t opening_request = async_send_2(exch, method, ep, tr_type, NULL);
        if (opening_request == 0) {
                async_exchange_end(exch);
                return ENOMEM;
        }
        
        ipc_call_t data_request_call;
        aid_t data_request = async_data_read(exch, data, data_size,
            &data_request_call);
        
        async_exchange_end(exch);
        
        if (data_request == 0) {
                async_forget(opening_request);
                return ENOMEM;
        }
        
        sysarg_t data_request_rc;
        sysarg_t opening_request_rc;
        async_wait_for(data_request, &data_request_rc);
        async_wait_for(opening_request, &opening_request_rc);
        
        if (data_request_rc != EOK) {
                /* Prefer the return code of the opening request. */
                if (opening_request_rc != EOK)
                        return (int) opening_request_rc;
                else
                        return (int) data_request_rc;
        }
        
        if (opening_request_rc != EOK)
                return (int) opening_request_rc;
        
        if (act_size != NULL)
                *act_size = IPC_GET_ARG2(data_request_call);
        
        return EOK;
}

/** Send data to virtual USB device.
 *
 * @param sess Session to the virtual device.
 * @param ep Target endpoint number.
 * @param tr_type Transfer type (interrupt or bulk).
 * @param data Data buffer.
 * @param data_size Size of the data buffer in bytes.
 *
 * @return Error code.
 *
 */
int usbvirt_ipc_send_data_out(async_sess_t *sess, usb_endpoint_t ep,
    usb_transfer_type_t tr_type, void *data, size_t data_size)
{
        if (!sess)
                return EINVAL;
        
        usbvirt_hc_to_device_method_t method;
        
        switch (tr_type) {
        case USB_TRANSFER_INTERRUPT:
                method = IPC_M_USBVIRT_INTERRUPT_OUT;
                break;
        case USB_TRANSFER_BULK:
                method = IPC_M_USBVIRT_BULK_OUT;
                break;
        default:
                return EINVAL;
        }
        
        if ((ep <= 0) || (ep >= USBVIRT_ENDPOINT_MAX))
                return EINVAL;
        
        if ((data == NULL) || (data_size == 0))
                return EINVAL;
        
        async_exch_t *exch = async_exchange_begin(sess);
        
        aid_t opening_request = async_send_1(exch, method, ep, NULL);
        if (opening_request == 0) {
                async_exchange_end(exch);
                return ENOMEM;
        }
        
        int rc = async_data_write_start(exch, data, data_size);
        
        async_exchange_end(exch);
        
        if (rc != EOK) {
                async_forget(opening_request);
                return rc;
        }
        
        sysarg_t opening_request_rc;
        async_wait_for(opening_request, &opening_request_rc);
        
        return (int) opening_request_rc;
}

/**
 * @}
 */