source: mainline/uspace/lib/usbhost/include/usb/host/endpoint.h@ db51a6a6

lfn serial ticket/834-toolchain-update topic/msim-upgrade topic/simplify-dev-export
Last change on this file since db51a6a6 was c6f82e5, checked in by Ondřej Hlavatý <aearsis@…>, 8 years ago

libusbhost: do not try to handle the toggle bit in a generic way

  • Property mode set to 100644
File size: 3.7 KB
Line 
1/*
2 * Copyright (c) 2011 Jan Vesely
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 *
9 * - Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * - Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * - The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 */
28
29/** @addtogroup libusbhost
30 * @{
31 */
32/** @file
33 *
34 * Endpoint structure is tightly coupled to the bus. The bus controls the
35 * life-cycle of endpoint. In order to keep endpoints lightweight, operations
36 * on endpoints are part of the bus structure.
37 *
38 */
39#ifndef LIBUSBHOST_HOST_ENDPOINT_H
40#define LIBUSBHOST_HOST_ENDPOINT_H
41
42#include <adt/list.h>
43#include <atomic.h>
44#include <fibril_synch.h>
45#include <stdbool.h>
46#include <sys/time.h>
47#include <usb/usb.h>
48#include <usb/host/bus.h>
49#include <usbhc_iface.h>
50
51typedef struct bus bus_t;
52typedef struct device device_t;
53typedef struct usb_transfer_batch usb_transfer_batch_t;
54
55/** Host controller side endpoint structure. */
56typedef struct endpoint {
57 /** USB device */
58 device_t *device;
59 /** Reference count. */
60 atomic_t refcnt;
61 /** Reserved bandwidth. */
62 size_t bandwidth;
63 /** The currently active transfer batch. Write using methods, read under guard. */
64 usb_transfer_batch_t *active_batch;
65 /** Protects resources and active status changes. */
66 fibril_mutex_t guard;
67 /** Signals change of active status. */
68 fibril_condvar_t avail;
69
70 /** Enpoint number */
71 usb_endpoint_t endpoint;
72 /** Communication direction. */
73 usb_direction_t direction;
74 /** USB transfer type. */
75 usb_transfer_type_t transfer_type;
76 /** Maximum size of one packet */
77 size_t max_packet_size;
78
79 /** Maximum size of one transfer */
80 size_t max_transfer_size;
81 /** Number of packats that can be sent in one service interval (not necessarily uframe) */
82 unsigned packets_per_uframe;
83
84 /* This structure is meant to be extended by overriding. */
85} endpoint_t;
86
87extern void endpoint_init(endpoint_t *, device_t *, const usb_endpoint_descriptors_t *);
88
89extern void endpoint_add_ref(endpoint_t *);
90extern void endpoint_del_ref(endpoint_t *);
91
92extern void endpoint_wait_timeout_locked(endpoint_t *ep, suseconds_t);
93extern void endpoint_activate_locked(endpoint_t *, usb_transfer_batch_t *);
94extern void endpoint_deactivate_locked(endpoint_t *);
95
96/* Calculate bandwidth */
97ssize_t endpoint_count_bw(endpoint_t *, size_t);
98
99int endpoint_send_batch(endpoint_t *, usb_target_t, usb_direction_t,
100 char *, size_t, uint64_t, usbhc_iface_transfer_callback_t, void *,
101 const char *);
102
103static inline bus_t *endpoint_get_bus(endpoint_t *ep)
104{
105 device_t * const device = ep->device;
106 return device ? device->bus : NULL;
107}
108
109#endif
110
111/**
112 * @}
113 */
Note: See TracBrowser for help on using the repository browser.