source: mainline/uspace/lib/usbdev/include/usb/dev/request.h@ b6bade0

/*
 * Copyright (c) 2011 Vojtech Horky
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * - Redistributions of source code must retain the above copyright
 *   notice, this list of conditions and the following disclaimer.
 * - Redistributions in binary form must reproduce the above copyright
 *   notice, this list of conditions and the following disclaimer in the
 *   documentation and/or other materials provided with the distribution.
 * - The name of the author may not be used to endorse or promote products
 *   derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/** @addtogroup libusbdev
 * @{
 */
/** @file
 * Standard USB requests.
 */
#ifndef LIBUSBDEV_REQUEST_H_
#define LIBUSBDEV_REQUEST_H_

#include <sys/types.h>
#include <l18n/langs.h>
#include <usb/usb.h>
#include <usb/dev/pipes.h>
#include <usb/descriptor.h>

/** USB device status - device is self powered (opposed to bus powered). */
#define USB_DEVICE_STATUS_SELF_POWERED ((uint16_t)(1 << 0))

/** USB device status - remote wake-up signaling is enabled. */
#define USB_DEVICE_STATUS_REMOTE_WAKEUP ((uint16_t)(1 << 1))

/** USB endpoint status - endpoint is halted (stalled). */
#define USB_ENDPOINT_STATUS_HALTED ((uint16_t)(1 << 0))

/** USB feature selector - endpoint halt (stall). */
#define USB_FEATURE_SELECTOR_ENDPOINT_HALT (0)

/** USB feature selector - device remote wake-up. */
#define USB_FEATURE_SELECTOR_REMOTE_WAKEUP (1)

/** Standard device request. */
typedef enum {
        USB_DEVREQ_GET_STATUS = 0,
        USB_DEVREQ_CLEAR_FEATURE = 1,
        USB_DEVREQ_SET_FEATURE = 3,
        USB_DEVREQ_SET_ADDRESS = 5,
        USB_DEVREQ_GET_DESCRIPTOR = 6,
        USB_DEVREQ_SET_DESCRIPTOR = 7,
        USB_DEVREQ_GET_CONFIGURATION = 8,
        USB_DEVREQ_SET_CONFIGURATION = 9,
        USB_DEVREQ_GET_INTERFACE = 10,
        USB_DEVREQ_SET_INTERFACE = 11,
        USB_DEVREQ_SYNCH_FRAME = 12,
        USB_DEVREQ_LAST_STD
} usb_stddevreq_t;

/** Device request setup packet.
 * The setup packet describes the request.
 */
typedef struct {
        /** Request type.
         * The type combines transfer direction, request type and
         * intended recipient.
         */
        uint8_t request_type;
#define SETUP_REQUEST_TYPE_DEVICE_TO_HOST (1 << 7)
#define SETUP_REQUEST_TYPE_GET_TYPE(rt) ((rt >> 5) & 0x3)
#define SETUP_REQUEST_TYPE_GET_RECIPIENT(rec) (rec & 0x1f)
#define SETUP_REQUEST_TO_HOST(type, recipient) \
    (uint8_t)((1 << 7) | ((type & 0x3) << 5) | (recipient & 0x1f))
#define SETUP_REQUEST_TO_DEVICE(type, recipient) \
    (uint8_t)(((type & 0x3) << 5) | (recipient & 0x1f))

        /** Request identification. */
        uint8_t request;
        /** Main parameter to the request. */
        union {
                uint16_t value;
                /* FIXME: add #ifdefs according to host endianness */
                struct {
                        uint8_t value_low;
                        uint8_t value_high;
                };
        };
        /** Auxiliary parameter to the request.
         * Typically, it is offset to something.
         */
        uint16_t index;
        /** Length of extra data. */
        uint16_t length;
} __attribute__ ((packed)) usb_device_request_setup_packet_t;

int usb_control_request_set(usb_pipe_t *,
    usb_request_type_t, usb_request_recipient_t, uint8_t,
    uint16_t, uint16_t, void *, size_t);

int usb_control_request_get(usb_pipe_t *,
    usb_request_type_t, usb_request_recipient_t, uint8_t,
    uint16_t, uint16_t, void *, size_t, size_t *);

int usb_request_get_status(usb_pipe_t *, usb_request_recipient_t,
    uint16_t, uint16_t *);
int usb_request_clear_feature(usb_pipe_t *, usb_request_type_t,
    usb_request_recipient_t, uint16_t, uint16_t);
int usb_request_set_feature(usb_pipe_t *, usb_request_type_t,
    usb_request_recipient_t, uint16_t, uint16_t);
int usb_request_get_descriptor(usb_pipe_t *, usb_request_type_t,
    usb_request_recipient_t, uint8_t, uint8_t, uint16_t, void *, size_t,
    size_t *);
int usb_request_get_descriptor_alloc(usb_pipe_t *, usb_request_type_t,
    usb_request_recipient_t, uint8_t, uint8_t, uint16_t, void **, size_t *);
int usb_request_get_device_descriptor(usb_pipe_t *,
    usb_standard_device_descriptor_t *);
int usb_request_get_bare_configuration_descriptor(usb_pipe_t *, int,
    usb_standard_configuration_descriptor_t *);
int usb_request_get_full_configuration_descriptor(usb_pipe_t *, int,
    void *, size_t, size_t *);
int usb_request_get_full_configuration_descriptor_alloc(usb_pipe_t *,
    int, void **, size_t *);
int usb_request_set_descriptor(usb_pipe_t *, usb_request_type_t,
    usb_request_recipient_t, uint8_t, uint8_t, uint16_t, void *, size_t);

int usb_request_get_configuration(usb_pipe_t *, uint8_t *);
int usb_request_set_configuration(usb_pipe_t *, uint8_t);
int usb_request_get_interface(usb_pipe_t *, uint8_t, uint8_t *);
int usb_request_set_interface(usb_pipe_t *, uint8_t, uint8_t);

int usb_request_get_supported_languages(usb_pipe_t *,
    l18_win_locales_t **, size_t *);
int usb_request_get_string(usb_pipe_t *, size_t, l18_win_locales_t,
    char **);

int usb_request_clear_endpoint_halt(usb_pipe_t *, uint16_t);
int usb_pipe_clear_halt(usb_pipe_t *, usb_pipe_t *);
int usb_request_get_endpoint_status(usb_pipe_t *, usb_pipe_t *, uint16_t *);

#endif
/**
 * @}
 */