source: mainline/uspace/lib/usb/src/usbdrv.c@ 4689d40

/*
 * Copyright (c) 2010 Vojtech Horky
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * - Redistributions of source code must retain the above copyright
 *   notice, this list of conditions and the following disclaimer.
 * - Redistributions in binary form must reproduce the above copyright
 *   notice, this list of conditions and the following disclaimer in the
 *   documentation and/or other materials provided with the distribution.
 * - The name of the author may not be used to endorse or promote products
 *   derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/** @addtogroup libusb usb
 * @{
 */
/** @file
 * @brief USB driver (implementation).
 */
#include <usb/usbdrv.h>
#include <usbhc_iface.h>
#include <errno.h>

/** Information about pending transaction on HC. */
typedef struct {
        /** Phone to host controller driver. */
        int phone;
        /** Data buffer. */
        void *buffer;
        /** Buffer size. */
        size_t size;
        /** Storage for actual number of bytes transferred. */
        size_t *size_transferred;
        /** Initial call replay data. */
        ipc_call_t reply;
        /** Initial call identifier. */
        aid_t request;
} transfer_info_t;

/** Connect to host controller the device is physically attached to.
 *
 * @param dev Device asking for connection.
 * @param flags Connection flags (blocking connection).
 * @return Phone to corresponding HC or error code.
 */
int usb_drv_hc_connect(device_t *dev, unsigned int flags)
{
        /*
         * Call parent hub to obtain device handle of respective HC.
         */

        /*
         * FIXME: currently we connect always to virtual host controller.
         */
        int rc;
        devman_handle_t handle;

        rc = devman_device_get_handle("/vhc", &handle, 0);
        if (rc != EOK) {
                return rc;
        }
        
        int phone = devman_device_connect(handle, 0);

        return phone;
}

/** Tell USB address assigned to given device.
 *
 * @param phone Phone to my HC.
 * @param dev Device in question.
 * @return USB address or error code.
 */
usb_address_t usb_drv_get_my_address(int phone, device_t *dev)
{
        ipcarg_t address;
        int rc = async_req_1_1(phone, IPC_M_USBHC_GET_ADDRESS,
            dev->handle, &address);

        if (rc != EOK) {
                return rc;
        }

        return (usb_address_t) address;
}

/** Tell HC to reserve default address.
 *
 * @param phone Open phone to host controller driver.
 * @return Error code.
 */
int usb_drv_reserve_default_address(int phone)
{
        return async_req_0_0(phone, IPC_M_USBHC_RESERVE_DEFAULT_ADDRESS);
}

/** Tell HC to release default address.
 *
 * @param phone Open phone to host controller driver.
 * @return Error code.
 */
int usb_drv_release_default_address(int phone)
{
        return async_req_0_0(phone, IPC_M_USBHC_RELEASE_DEFAULT_ADDRESS);
}

/** Ask HC for free address assignment.
 *
 * @param phone Open phone to host controller driver.
 * @return Assigned USB address or negative error code.
 */
usb_address_t usb_drv_request_address(int phone)
{
        ipcarg_t address;
        int rc = async_req_0_1(phone, IPC_M_USBHC_REQUEST_ADDRESS, &address);
        if (rc != EOK) {
                return rc;
        } else {
                return (usb_address_t) address;
        }
}

/** Inform HC about binding address with devman handle.
 *
 * @param phone Open phone to host controller driver.
 * @param address Address to be binded.
 * @param handle Devman handle of the device.
 * @return Error code.
 */
int usb_drv_bind_address(int phone, usb_address_t address,
    devman_handle_t handle)
{
        int rc = async_req_2_0(phone, IPC_M_USBHC_BIND_ADDRESS,
            address, handle);

        return rc;
}

/** Inform HC about address release.
 *
 * @param phone Open phone to host controller driver.
 * @param address Address to be released.
 * @return Error code.
 */
int usb_drv_release_address(int phone, usb_address_t address)
{
        return async_req_1_0(phone, IPC_M_USBHC_RELEASE_ADDRESS, address);
}

/** Send data to HCD.
 *
 * @param phone Phone to HC.
 * @param method Method used for calling.
 * @param target Targeted device.
 * @param buffer Data buffer (NULL to skip data transfer phase).
 * @param size Buffer size (must be zero when @p buffer is NULL).
 * @param handle Storage for transaction handle (cannot be NULL).
 * @return Error status.
 * @retval EINVAL Invalid parameter.
 * @retval ENOMEM Not enough memory to complete the operation.
 */
static int async_send_buffer(int phone, int method,
    usb_target_t target,
    void *buffer, size_t size,
    usb_handle_t *handle)
{
        if (phone < 0) {
                return EINVAL;
        }

        if ((buffer == NULL) && (size > 0)) {
                return EINVAL;
        }

        if (handle == NULL) {
                return EINVAL;
        }

        transfer_info_t *transfer
            = (transfer_info_t *) malloc(sizeof(transfer_info_t));
        if (transfer == NULL) {
                return ENOMEM;
        }

        transfer->size_transferred = NULL;
        transfer->buffer = NULL;
        transfer->size = 0;
        transfer->phone = phone;

        int rc;

        transfer->request = async_send_4(phone,
            DEV_IFACE_ID(USBHC_DEV_IFACE),
            method,
            target.address, target.endpoint,
            size,
            &transfer->reply);

        if (size > 0) {
                rc = async_data_write_start(phone, buffer, size);
                if (rc != EOK) {
                        async_wait_for(transfer->request, NULL);
                        return rc;
                }
        }

        *handle = (usb_handle_t) transfer;

        return EOK;
}

/** Prepare data retrieval.
 *
 * @param phone Opened phone to HCD.
 * @param method Method used for calling.
 * @param target Targeted device.
 * @param buffer Buffer where to store retrieved data
 *      (NULL to skip data transfer phase).
 * @param size Buffer size (must be zero when @p buffer is NULL).
 * @param actual_size Storage where actual number of bytes transferred will
 *      be stored.
 * @param handle Storage for transaction handle (cannot be NULL).
 * @return Error status.
 * @retval EINVAL Invalid parameter.
 * @retval ENOMEM Not enough memory to complete the operation.
 */
static int async_recv_buffer(int phone, int method,
    usb_target_t target,
    void *buffer, size_t size, size_t *actual_size,
    usb_handle_t *handle)
{
        if (phone < 0) {
                return EINVAL;
        }

        if ((buffer == NULL) && (size > 0)) {
                return EINVAL;
        }

        if (handle == NULL) {
                return EINVAL;
        }

        transfer_info_t *transfer
            = (transfer_info_t *) malloc(sizeof(transfer_info_t));
        if (transfer == NULL) {
                return ENOMEM;
        }

        transfer->size_transferred = actual_size;
        transfer->buffer = buffer;
        transfer->size = size;
        transfer->phone = phone;

        transfer->request = async_send_4(phone,
            DEV_IFACE_ID(USBHC_DEV_IFACE),
            method,
            target.address, target.endpoint,
            size,
            &transfer->reply);

        *handle = (usb_handle_t) transfer;

        return EOK;
}

/** Read buffer from HCD.
 *
 * @param phone Opened phone to HCD.
 * @param hash Buffer hash (obtained after completing IN transaction).
 * @param buffer Buffer where to store data data.
 * @param size Buffer size.
 * @param actual_size Storage where actual number of bytes transferred will
 *      be stored.
 * @return Error status.
 */
static int read_buffer_in(int phone, ipcarg_t hash,
    void *buffer, size_t size, size_t *actual_size)
{
        ipc_call_t answer_data;
        ipcarg_t answer_rc;
        aid_t req;
        int rc;

        req = async_send_2(phone,
            DEV_IFACE_ID(USBHC_DEV_IFACE),
            IPC_M_USBHC_GET_BUFFER,
            hash,
            &answer_data);

        rc = async_data_read_start(phone, buffer, size);
        if (rc != EOK) {
                async_wait_for(req, NULL);
                return EINVAL;
        }

        async_wait_for(req, &answer_rc);
        rc = (int)answer_rc;

        if (rc != EOK) {
                return rc;
        }

        *actual_size = IPC_GET_ARG1(answer_data);

        return EOK;
}

/** Blocks caller until given USB transaction is finished.
 * After the transaction is finished, the user can access all output data
 * given to initial call function.
 *
 * @param handle Transaction handle.
 * @return Error status.
 * @retval EOK No error.
 * @retval EBADMEM Invalid handle.
 * @retval ENOENT Data buffer associated with transaction does not exist.
 */
int usb_drv_async_wait_for(usb_handle_t handle)
{
        if (handle == 0) {
                return EBADMEM;
        }

        int rc = EOK;

        transfer_info_t *transfer = (transfer_info_t *) handle;

        ipcarg_t answer_rc;
        async_wait_for(transfer->request, &answer_rc);

        if (answer_rc != EOK) {
                rc = (int) answer_rc;
                goto leave;
        }

        /*
         * If the buffer is not NULL, we must accept some data.
         */
        if ((transfer->buffer != NULL) && (transfer->size > 0)) {
                /*
                 * The buffer hash identifies the data on the server
                 * side.
                 * We will use it when actually reading-in the data.
                 */
                ipcarg_t buffer_hash = IPC_GET_ARG1(transfer->reply);
                if (buffer_hash == 0) {
                        rc = ENOENT;
                        goto leave;
                }

                size_t actual_size;
                rc = read_buffer_in(transfer->phone, buffer_hash,
                    transfer->buffer, transfer->size, &actual_size);

                if (rc != EOK) {
                        goto leave;
                }

                if (transfer->size_transferred) {
                        *(transfer->size_transferred) = actual_size;
                }
        }

leave:
        free(transfer);

        return rc;
}

/** Send interrupt data to device. */
int usb_drv_async_interrupt_out(int phone, usb_target_t target,
    void *buffer, size_t size,
    usb_handle_t *handle)
{
        return async_send_buffer(phone,
            IPC_M_USBHC_INTERRUPT_OUT,
            target,
            buffer, size,
            handle);
}

/** Request interrupt data from device. */
int usb_drv_async_interrupt_in(int phone, usb_target_t target,
    void *buffer, size_t size, size_t *actual_size,
    usb_handle_t *handle)
{
        return async_recv_buffer(phone,
            IPC_M_USBHC_INTERRUPT_IN,
            target,
            buffer, size, actual_size,
            handle);
}

/** Start control write transfer. */
int usb_drv_async_control_write_setup(int phone, usb_target_t target,
    void *buffer, size_t size,
    usb_handle_t *handle)
{
        return async_send_buffer(phone,
            IPC_M_USBHC_CONTROL_WRITE_SETUP,
            target,
            buffer, size,
            handle);
}

/** Send data during control write transfer. */
int usb_drv_async_control_write_data(int phone, usb_target_t target,
    void *buffer, size_t size,
    usb_handle_t *handle)
{
        return async_send_buffer(phone,
            IPC_M_USBHC_CONTROL_WRITE_DATA,
            target,
            buffer, size,
            handle);
}

/** Finalize control write transfer. */
int usb_drv_async_control_write_status(int phone, usb_target_t target,
    usb_handle_t *handle)
{
        return async_recv_buffer(phone,
            IPC_M_USBHC_CONTROL_WRITE_STATUS,
            target,
            NULL, 0, NULL,
            handle);
}

/** Start control read transfer. */
int usb_drv_async_control_read_setup(int phone, usb_target_t target,
    void *buffer, size_t size,
    usb_handle_t *handle)
{
        return async_send_buffer(phone,
            IPC_M_USBHC_CONTROL_READ_SETUP,
            target,
            buffer, size,
            handle);
}

/** Read data during control read transfer. */
int usb_drv_async_control_read_data(int phone, usb_target_t target,
    void *buffer, size_t size, size_t *actual_size,
    usb_handle_t *handle)
{
        return async_recv_buffer(phone,
            IPC_M_USBHC_CONTROL_READ_DATA,
            target,
            buffer, size, actual_size,
            handle);
}

/** Finalize control read transfer. */
int usb_drv_async_control_read_status(int phone, usb_target_t target,
    usb_handle_t *handle)
{
        return async_send_buffer(phone,
            IPC_M_USBHC_CONTROL_READ_STATUS,
            target,
            NULL, 0,
            handle);
}

/**
 * @}
 */