source: mainline/uspace/lib/usb/include/usb/request.h@ 0f21c0c

lfn serial ticket/834-toolchain-update topic/msim-upgrade topic/simplify-dev-export
Last change on this file since 0f21c0c was 0f21c0c, checked in by Vojtech Horky <vojtechhorky@…>, 15 years ago

Removal of API that use phones directly

  • Property mode set to 100644
File size: 3.7 KB
Line 
1/*
2 * Copyright (c) 2011 Vojtech Horky
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 *
9 * - Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * - Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * - The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 */
28
29/** @addtogroup libusb
30 * @{
31 */
32/** @file
33 * Standard USB requests.
34 */
35#ifndef LIBUSB_REQUEST_H_
36#define LIBUSB_REQUEST_H_
37
38#include <sys/types.h>
39#include <usb/usb.h>
40#include <usb/pipes.h>
41#include <usb/descriptor.h>
42
43/** Standard device request. */
44typedef enum {
45 USB_DEVREQ_GET_STATUS = 0,
46 USB_DEVREQ_CLEAR_FEATURE = 1,
47 USB_DEVREQ_SET_FEATURE = 3,
48 USB_DEVREQ_SET_ADDRESS = 5,
49 USB_DEVREQ_GET_DESCRIPTOR = 6,
50 USB_DEVREQ_SET_DESCRIPTOR = 7,
51 USB_DEVREQ_GET_CONFIGURATION = 8,
52 USB_DEVREQ_SET_CONFIGURATION = 9,
53 USB_DEVREQ_GET_INTERFACE = 10,
54 USB_DEVREQ_SET_INTERFACE = 11,
55 USB_DEVREQ_SYNCH_FRAME = 12,
56 USB_DEVREQ_LAST_STD
57} usb_stddevreq_t;
58
59/** Device request setup packet.
60 * The setup packet describes the request.
61 */
62typedef struct {
63 /** Request type.
64 * The type combines transfer direction, request type and
65 * intended recipient.
66 */
67 uint8_t request_type;
68 /** Request identification. */
69 uint8_t request;
70 /** Main parameter to the request. */
71 union {
72 uint16_t value;
73 /* FIXME: add #ifdefs according to host endianess */
74 struct {
75 uint8_t value_low;
76 uint8_t value_high;
77 };
78 };
79 /** Auxiliary parameter to the request.
80 * Typically, it is offset to something.
81 */
82 uint16_t index;
83 /** Length of extra data. */
84 uint16_t length;
85} __attribute__ ((packed)) usb_device_request_setup_packet_t;
86
87int usb_control_request_set(usb_endpoint_pipe_t *,
88 usb_request_type_t, usb_request_recipient_t, uint8_t,
89 uint16_t, uint16_t, void *, size_t);
90
91int usb_control_request_get(usb_endpoint_pipe_t *,
92 usb_request_type_t, usb_request_recipient_t, uint8_t,
93 uint16_t, uint16_t, void *, size_t, size_t *);
94
95int usb_request_set_address(usb_endpoint_pipe_t *, usb_address_t);
96int usb_request_get_descriptor(usb_endpoint_pipe_t *, usb_request_type_t,
97 uint8_t, uint8_t, uint16_t, void *, size_t, size_t *);
98int usb_request_get_device_descriptor(usb_endpoint_pipe_t *,
99 usb_standard_device_descriptor_t *);
100int usb_request_get_bare_configuration_descriptor(usb_endpoint_pipe_t *, int,
101 usb_standard_configuration_descriptor_t *);
102int usb_request_get_full_configuration_descriptor(usb_endpoint_pipe_t *, int,
103 void *, size_t, size_t *);
104int usb_request_set_configuration(usb_endpoint_pipe_t *, uint8_t);
105
106#endif
107/**
108 * @}
109 */
Note: See TracBrowser for help on using the repository browser.