source: mainline/uspace/drv/vhc/hubops.c@ 4b4c797

lfn serial ticket/834-toolchain-update topic/msim-upgrade topic/simplify-dev-export
Last change on this file since 4b4c797 was 4b4c797, checked in by Vojtech Horky <vojtechhorky@…>, 15 years ago

Directory structure reorganization

USB class-specific headers are in separate directory.

Removed unused/unreachable code.
  • Property mode set to 100644
File size: 9.7 KB
RevLine 
[b8507a1]1/*
2 * Copyright (c) 2010 Vojtech Horky
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 *
9 * - Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * - Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * - The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 */
28
29/** @addtogroup usb
30 * @{
31 */
32/** @file
33 * @brief Virtual USB hub operations.
34 */
[4b4c797]35#include <usb/classes/classes.h>
36#include <usb/classes/hub.h>
[b8507a1]37#include <usbvirt/hub.h>
38#include <usbvirt/device.h>
39#include <errno.h>
40
41#include "vhcd.h"
42#include "hub.h"
43#include "hubintern.h"
44
[355f7c2]45/** Produce a byte from bit values.
46 */
[6c741e1d]47#define MAKE_BYTE(b0, b1, b2, b3, b4, b5, b6, b7) \
48 (( \
49 ((b0) << 0) \
50 | ((b1) << 1) \
51 | ((b2) << 2) \
52 | ((b3) << 3) \
53 | ((b4) << 4) \
54 | ((b5) << 5) \
55 | ((b6) << 6) \
56 | ((b7) << 7) \
57 ))
58
[b8507a1]59static int on_get_descriptor(struct usbvirt_device *dev,
60 usb_device_request_setup_packet_t *request, uint8_t *data);
61static int on_class_request(struct usbvirt_device *dev,
62 usb_device_request_setup_packet_t *request, uint8_t *data);
[7a7bfeb3]63static int on_data_request(struct usbvirt_device *dev,
64 usb_endpoint_t endpoint,
65 void *buffer, size_t size, size_t *actual_size);
66
[355f7c2]67/** Standard USB requests. */
[b8507a1]68static usbvirt_standard_device_request_ops_t standard_request_ops = {
69 .on_get_status = NULL,
70 .on_clear_feature = NULL,
71 .on_set_feature = NULL,
72 .on_set_address = NULL,
73 .on_get_descriptor = on_get_descriptor,
74 .on_set_descriptor = NULL,
75 .on_get_configuration = NULL,
76 .on_set_configuration = NULL,
77 .on_get_interface = NULL,
78 .on_set_interface = NULL,
79 .on_synch_frame = NULL
80};
81
[355f7c2]82/** Hub operations. */
[b8507a1]83usbvirt_device_ops_t hub_ops = {
84 .standard_request_ops = &standard_request_ops,
85 .on_class_device_request = on_class_request,
[7a7bfeb3]86 .on_data = NULL,
87 .on_data_request = on_data_request
[b8507a1]88};
89
[355f7c2]90/** Callback for GET_DESCRIPTOR request. */
[b8507a1]91static int on_get_descriptor(struct usbvirt_device *dev,
92 usb_device_request_setup_packet_t *request, uint8_t *data)
93{
94 if (request->value_high == USB_DESCTYPE_HUB) {
[7a7bfeb3]95 int rc = dev->control_transfer_reply(dev, 0,
[b8507a1]96 &hub_descriptor, hub_descriptor.length);
97
98 return rc;
99 }
100 /* Let the framework handle all the rest. */
101 return EFORWARD;
102}
103
[6c741e1d]104/** Change port status and updates status change status fields.
105 */
106static void set_port_state(hub_port_t *port, hub_port_state_t state)
107{
108 port->state = state;
109 if (state == HUB_PORT_STATE_POWERED_OFF) {
110 clear_port_status_change(port, HUB_STATUS_C_PORT_CONNECTION);
111 clear_port_status_change(port, HUB_STATUS_C_PORT_ENABLE);
112 clear_port_status_change(port, HUB_STATUS_C_PORT_RESET);
113 }
114 if (state == HUB_PORT_STATE_RESUMING) {
115 async_usleep(10*1000);
116 if (port->state == state) {
117 set_port_state(port, HUB_PORT_STATE_ENABLED);
118 }
119 }
120 if (state == HUB_PORT_STATE_RESETTING) {
121 async_usleep(10*1000);
122 if (port->state == state) {
123 set_port_status_change(port, HUB_STATUS_C_PORT_RESET);
124 set_port_state(port, HUB_PORT_STATE_ENABLED);
125 }
126 }
127}
128
[355f7c2]129/** Get access to a port or return with EINVAL. */
[6c741e1d]130#define _GET_PORT(portvar, index) \
131 do { \
132 if (virthub_dev.state != USBVIRT_STATE_CONFIGURED) { \
133 return EINVAL; \
134 } \
135 if (((index) == 0) || ((index) > HUB_PORT_COUNT)) { \
136 return EINVAL; \
137 } \
138 } while (false); \
139 hub_port_t *portvar = &hub_dev.ports[index]
140
141
[b8507a1]142static int clear_hub_feature(uint16_t feature)
143{
144 return ENOTSUP;
145}
146
147static int clear_port_feature(uint16_t feature, uint16_t portindex)
[6c741e1d]148{
149 _GET_PORT(port, portindex);
150
151 switch (feature) {
152 case USB_HUB_FEATURE_PORT_ENABLE:
153 if ((port->state != HUB_PORT_STATE_NOT_CONFIGURED)
154 && (port->state != HUB_PORT_STATE_POWERED_OFF)) {
155 set_port_state(port, HUB_PORT_STATE_DISABLED);
156 }
157 return EOK;
158
159 case USB_HUB_FEATURE_PORT_SUSPEND:
160 if (port->state != HUB_PORT_STATE_SUSPENDED) {
161 return EOK;
162 }
163 set_port_state(port, HUB_PORT_STATE_RESUMING);
164 return EOK;
165
166 case USB_HUB_FEATURE_PORT_POWER:
167 if (port->state != HUB_PORT_STATE_NOT_CONFIGURED) {
168 set_port_state(port, HUB_PORT_STATE_POWERED_OFF);
169 }
170 return EOK;
171
172 case USB_HUB_FEATURE_C_PORT_CONNECTION:
173 clear_port_status_change(port, HUB_STATUS_C_PORT_CONNECTION);
174 return EOK;
175
176 case USB_HUB_FEATURE_C_PORT_ENABLE:
177 clear_port_status_change(port, HUB_STATUS_C_PORT_ENABLE);
178 return EOK;
179
180 case USB_HUB_FEATURE_C_PORT_SUSPEND:
181 clear_port_status_change(port, HUB_STATUS_C_PORT_SUSPEND);
182 return EOK;
183
184 case USB_HUB_FEATURE_C_PORT_OVER_CURRENT:
185 clear_port_status_change(port, HUB_STATUS_C_PORT_OVER_CURRENT);
186 return EOK;
187 }
188
[b8507a1]189 return ENOTSUP;
190}
191
192static int get_bus_state(uint16_t portindex)
193{
194 return ENOTSUP;
195}
196
197static int get_hub_descriptor(uint8_t descriptor_type,
198 uint8_t descriptor_index, uint16_t length)
199{
200 return ENOTSUP;
201}
202
203static int get_hub_status(void)
204{
[6c741e1d]205 uint32_t hub_status = 0;
206
[7a7bfeb3]207 return virthub_dev.control_transfer_reply(&virthub_dev, 0,
208 &hub_status, 4);
[b8507a1]209}
210
211static int get_port_status(uint16_t portindex)
212{
[6c741e1d]213 _GET_PORT(port, portindex);
214
215 uint32_t status;
216 status = MAKE_BYTE(
217 /* Current connect status. */
218 port->device == NULL ? 0 : 1,
219 /* Port enabled/disabled. */
220 port->state == HUB_PORT_STATE_ENABLED ? 1 : 0,
221 /* Suspend. */
222 (port->state == HUB_PORT_STATE_SUSPENDED)
223 || (port->state == HUB_PORT_STATE_RESUMING) ? 1 : 0,
224 /* Over-current. */
225 0,
226 /* Reset. */
227 port->state == HUB_PORT_STATE_RESETTING ? 1 : 0,
228 /* Reserved. */
229 0, 0, 0)
230
231 | (MAKE_BYTE(
232 /* Port power. */
233 port->state == HUB_PORT_STATE_POWERED_OFF ? 0 : 1,
234 /* Full-speed device. */
235 0,
236 /* Reserved. */
237 0, 0, 0, 0, 0, 0
238 )) << 8;
239
240 status |= (port->status_change << 16);
241
[7a7bfeb3]242 return virthub_dev.control_transfer_reply(&virthub_dev, 0, &status, 4);
[b8507a1]243}
244
245
246static int set_hub_feature(uint16_t feature)
247{
248 return ENOTSUP;
249}
250
251static int set_port_feature(uint16_t feature, uint16_t portindex)
252{
[6c741e1d]253 _GET_PORT(port, portindex);
254
255 switch (feature) {
256 case USB_HUB_FEATURE_PORT_RESET:
257 if (port->state != HUB_PORT_STATE_POWERED_OFF) {
258 set_port_state(port, HUB_PORT_STATE_RESETTING);
259 }
260 return EOK;
261
262 case USB_HUB_FEATURE_PORT_SUSPEND:
263 if (port->state == HUB_PORT_STATE_ENABLED) {
264 set_port_state(port, HUB_PORT_STATE_SUSPENDED);
265 }
266 return EOK;
267
268 case USB_HUB_FEATURE_PORT_POWER:
269 if (port->state == HUB_PORT_STATE_POWERED_OFF) {
270 set_port_state(port, HUB_PORT_STATE_DISCONNECTED);
271 }
272 return EOK;
273 }
[b8507a1]274 return ENOTSUP;
275}
276
[6c741e1d]277#undef _GET_PORT
278
279
[355f7c2]280/** Callback for class request. */
[b8507a1]281static int on_class_request(struct usbvirt_device *dev,
282 usb_device_request_setup_packet_t *request, uint8_t *data)
283{
[355f7c2]284 dprintf(2, "hub class request (%d)\n", (int) request->request);
[b8507a1]285
286 uint8_t recipient = request->request_type & 31;
287 uint8_t direction = request->request_type >> 7;
288
289#define _VERIFY(cond) \
290 do { \
291 if (!(cond)) { \
[355f7c2]292 dprintf(0, "WARN: invalid class request (%s not met).\n", \
[b8507a1]293 NAME, #cond); \
294 return EINVAL; \
295 } \
296 } while (0)
297
298 switch (request->request) {
299 case USB_HUB_REQUEST_CLEAR_FEATURE:
300 _VERIFY(direction == 0);
301 _VERIFY(request->length == 0);
302 if (recipient == 0) {
303 _VERIFY(request->index == 0);
304 return clear_hub_feature(request->value);
305 } else {
306 _VERIFY(recipient == 3);
307 return clear_port_feature(request->value,
308 request->index);
309 }
310
311 case USB_HUB_REQUEST_GET_STATE:
312 return get_bus_state(request->index);
313
314 case USB_HUB_REQUEST_GET_DESCRIPTOR:
315 return get_hub_descriptor(request->value_low,
316 request->value_high, request->length);
317
318 case USB_HUB_REQUEST_GET_STATUS:
319 if (recipient == 0) {
320 return get_hub_status();
321 } else {
322 return get_port_status(request->index);
323 }
324
325 case USB_HUB_REQUEST_SET_FEATURE:
326 if (recipient == 0) {
327 return set_hub_feature(request->value);
328 } else {
329 return set_port_feature(request->value, request->index);
330 }
331
332 default:
333 break;
334 }
335
336#undef _VERIFY
337
338
339 return EOK;
340}
341
[6c741e1d]342void clear_port_status_change(hub_port_t *port, uint16_t change)
343{
344 port->status_change &= (~change);
345}
346
347void set_port_status_change(hub_port_t *port, uint16_t change)
348{
349 port->status_change |= change;
350}
351
[355f7c2]352/** Callback for data request. */
[7a7bfeb3]353static int on_data_request(struct usbvirt_device *dev,
354 usb_endpoint_t endpoint,
355 void *buffer, size_t size, size_t *actual_size)
356{
[355f7c2]357 if (endpoint != HUB_STATUS_CHANGE_PIPE) {
358 return EINVAL;
359 }
360
[7a7bfeb3]361 uint8_t change_map = 0;
362
363 size_t i;
364 for (i = 0; i < HUB_PORT_COUNT; i++) {
365 hub_port_t *port = &hub_dev.ports[i];
366
367 if (port->status_change != 0) {
368 change_map |= (1 << (i + 1));
369 }
370 }
371
372 uint8_t *b = (uint8_t *) buffer;
373 if (size > 0) {
374 *b = change_map;
375 *actual_size = 1;
376 }
377
378 return EOK;
379}
380
381
[b8507a1]382/**
383 * @}
384 */
Note: See TracBrowser for help on using the repository browser.