source: mainline/uspace/drv/usbhid/main.c@ b9d910f

/*
 * Copyright (c) 2010 Vojtech Horky
 * Copyright (c) 2011 Lubos Slovak
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * - Redistributions of source code must retain the above copyright
 *   notice, this list of conditions and the following disclaimer.
 * - Redistributions in binary form must reproduce the above copyright
 *   notice, this list of conditions and the following disclaimer in the
 *   documentation and/or other materials provided with the distribution.
 * - The name of the author may not be used to endorse or promote products
 *   derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/** @addtogroup drvusbhid
 * @{
 */
/**
 * @file
 * Main routines of USB HID driver.
 */

#include <usb/usbdrv.h>
#include <driver.h>
#include <ipc/driver.h>
#include <ipc/kbd.h>
#include <io/keycode.h>
#include <io/console.h>
#include <errno.h>
#include <str_error.h>
#include <fibril.h>
#include <usb/debug.h>
#include <usb/classes/classes.h>
#include <usb/classes/hid.h>
#include <usb/classes/hidparser.h>
#include <usb/request.h>
#include <usb/descriptor.h>
#include <io/console.h>
#include "hid.h"
#include "descparser.h"
#include "descdump.h"
#include "conv.h"
#include "layout.h"

#define BUFFER_SIZE 8
#define NAME "usbhid"

#define GUESSED_POLL_ENDPOINT 1

/** Keyboard polling endpoint description for boot protocol class. */
static usb_endpoint_description_t poll_endpoint_description = {
        .transfer_type = USB_TRANSFER_INTERRUPT,
        .direction = USB_DIRECTION_IN,
        .interface_class = USB_CLASS_HID,
        .interface_subclass = USB_HID_SUBCLASS_BOOT,
        .interface_protocol = USB_HID_PROTOCOL_KEYBOARD,
        .flags = 0
};

static void default_connection_handler(device_t *, ipc_callid_t, ipc_call_t *);
static device_ops_t keyboard_ops = {
        .default_handler = default_connection_handler
};

static int console_callback_phone = -1;

/** Default handler for IPC methods not handled by DDF.
 *
 * @param dev Device handling the call.
 * @param icallid Call id.
 * @param icall Call data.
 */
void default_connection_handler(device_t *dev,
    ipc_callid_t icallid, ipc_call_t *icall)
{
        sysarg_t method = IPC_GET_IMETHOD(*icall);

        if (method == IPC_M_CONNECT_TO_ME) {
                int callback = IPC_GET_ARG5(*icall);

                if (console_callback_phone != -1) {
                        async_answer_0(icallid, ELIMIT);
                        return;
                }

                console_callback_phone = callback;
                async_answer_0(icallid, EOK);
                return;
        }

        async_answer_0(icallid, EINVAL);
}

#if 0
static void send_key(int key, int type, wchar_t c) {
        async_msg_4(console_callback_phone, KBD_EVENT, type, key,
            KM_NUM_LOCK, c);
}
#endif

/*
 * TODO: Move somewhere else
 */
/*
#define BYTES_PER_LINE 12

static void dump_buffer(const char *msg, const uint8_t *buffer, size_t length)
{
        printf("%s\n", msg);
        
        size_t i;
        for (i = 0; i < length; i++) {
                printf("  0x%02X", buffer[i]);
                if (((i > 0) && (((i+1) % BYTES_PER_LINE) == 0))
                    || (i + 1 == length)) {
                        printf("\n");
                }
        }
}
*/
/*
 * Copy-paste from srv/hid/kbd/generic/kbd.c
 */

/** Currently active modifiers. 
 *
 * TODO: put to device?
 */
static unsigned mods = KM_NUM_LOCK;

/** Currently pressed lock keys. We track these to tackle autorepeat.  
 *
 * TODO: put to device? 
 */
static unsigned lock_keys;

#define NUM_LAYOUTS 3

static layout_op_t *layout[NUM_LAYOUTS] = {
        &us_qwerty_op,
        &us_dvorak_op,
        &cz_op
};

static int active_layout = 0;

static void kbd_push_ev(int type, unsigned int key)
{
        console_event_t ev;
        unsigned mod_mask;

        // TODO: replace by our own parsing?? or are the key codes identical??
        switch (key) {
        case KC_LCTRL: mod_mask = KM_LCTRL; break;
        case KC_RCTRL: mod_mask = KM_RCTRL; break;
        case KC_LSHIFT: mod_mask = KM_LSHIFT; break;
        case KC_RSHIFT: mod_mask = KM_RSHIFT; break;
        case KC_LALT: mod_mask = KM_LALT; break;
        case KC_RALT: mod_mask = KM_RALT; break;
        default: mod_mask = 0; break;
        }

        if (mod_mask != 0) {
                if (type == KEY_PRESS)
                        mods = mods | mod_mask;
                else
                        mods = mods & ~mod_mask;
        }

        switch (key) {
        case KC_CAPS_LOCK: mod_mask = KM_CAPS_LOCK; break;
        case KC_NUM_LOCK: mod_mask = KM_NUM_LOCK; break;
        case KC_SCROLL_LOCK: mod_mask = KM_SCROLL_LOCK; break;
        default: mod_mask = 0; break;
        }

        if (mod_mask != 0) {
                if (type == KEY_PRESS) {
                        /*
                         * Only change lock state on transition from released
                         * to pressed. This prevents autorepeat from messing
                         * up the lock state.
                         */
                        mods = mods ^ (mod_mask & ~lock_keys);
                        lock_keys = lock_keys | mod_mask;

                        /* Update keyboard lock indicator lights. */
                        // TODO
                        //kbd_ctl_set_ind(mods);
                } else {
                        lock_keys = lock_keys & ~mod_mask;
                }
        }
/*
        printf("type: %d\n", type);
        printf("mods: 0x%x\n", mods);
        printf("keycode: %u\n", key);
*/
        
        if (type == KEY_PRESS && (mods & KM_LCTRL) &&
                key == KC_F1) {
                active_layout = 0;
                layout[active_layout]->reset();
                return;
        }

        if (type == KEY_PRESS && (mods & KM_LCTRL) &&
                key == KC_F2) {
                active_layout = 1;
                layout[active_layout]->reset();
                return;
        }

        if (type == KEY_PRESS && (mods & KM_LCTRL) &&
                key == KC_F3) {
                active_layout = 2;
                layout[active_layout]->reset();
                return;
        }
        
        ev.type = type;
        ev.key = key;
        ev.mods = mods;

        ev.c = layout[active_layout]->parse_ev(&ev);

        printf("Sending key %d to the console\n", ev.key);
        assert(console_callback_phone != -1);
        async_msg_4(console_callback_phone, KBD_EVENT, ev.type, ev.key, ev.mods, ev.c);
}
/*
 * End of copy-paste
 */

        /*
         * TODO:
         * 1) key press / key release - how does the keyboard notify about release?
         * 2) layouts (use the already defined), not important now
         * 3) 
         */

/*
 * Callbacks for parser
 */
static void usbkbd_process_keycodes(const uint8_t *key_codes, size_t count,
    uint8_t modifiers, void *arg)
{
        printf("Got keys: ");
        unsigned i;
        for (i = 0; i < count; ++i) {
                printf("%d ", key_codes[i]);
                // TODO: Key press / release

                // TODO: NOT WORKING
                unsigned int key = usbkbd_parse_scancode(key_codes[i]);
                kbd_push_ev(KEY_PRESS, key);
        }
        printf("\n");
}

/*
 * Kbd functions
 */
static int usbkbd_get_report_descriptor(usb_hid_dev_kbd_t *kbd_dev)
{
        // iterate over all configurations and interfaces
        // TODO: more configurations!!
        unsigned i;
        for (i = 0; i < kbd_dev->conf->config_descriptor.interface_count; ++i) {
                // TODO: endianness
                uint16_t length = 
                    kbd_dev->conf->interfaces[i].hid_desc.report_desc_info.length;
                size_t actual_size = 0;

                // allocate space for the report descriptor
                kbd_dev->conf->interfaces[i].report_desc = (uint8_t *)malloc(length);
                
                // get the descriptor from the device
                int rc = usb_request_get_descriptor(&kbd_dev->ctrl_pipe,
                    USB_REQUEST_TYPE_CLASS, USB_DESCTYPE_HID_REPORT,
                    i, 0,
                    kbd_dev->conf->interfaces[i].report_desc, length,
                    &actual_size);

                if (rc != EOK) {
                        return rc;
                }

                assert(actual_size == length);

                //dump_hid_class_descriptor(0, USB_DESCTYPE_HID_REPORT, 
                //    kbd_dev->conf->interfaces[i].report_desc, length);
        }

        return EOK;
}
static int usbkbd_process_descriptors(usb_hid_dev_kbd_t *kbd_dev)
{
        // get the first configuration descriptor (TODO: parse also other!)
        usb_standard_configuration_descriptor_t config_desc;
        
        int rc;
        rc = usb_request_get_bare_configuration_descriptor(&kbd_dev->ctrl_pipe,
            0, &config_desc);
        
        if (rc != EOK) {
                return rc;
        }
        
        // prepare space for all underlying descriptors
        uint8_t *descriptors = (uint8_t *)malloc(config_desc.total_length);
        if (descriptors == NULL) {
                return ENOMEM;
        }
        
        size_t transferred = 0;
        // get full configuration descriptor
        rc = usb_request_get_full_configuration_descriptor(&kbd_dev->ctrl_pipe,
            0, descriptors,
            config_desc.total_length, &transferred);
        
        if (rc != EOK) {
                return rc;
        }
        if (transferred != config_desc.total_length) {
                return ELIMIT;
        }
        
        /*
         * Initialize the interrupt in endpoint.
         */
        usb_endpoint_mapping_t endpoint_mapping[1] = {
                {
                        .pipe = &kbd_dev->poll_pipe,
                        .description = &poll_endpoint_description
                }
        };
        rc = usb_endpoint_pipe_initialize_from_configuration(
            endpoint_mapping, 1,
            descriptors, config_desc.total_length,
            &kbd_dev->wire);
        if (rc != EOK) {
                usb_log_error("Failed to initialize poll pipe: %s.\n",
                    str_error(rc));
                return rc;
        }
        if (!endpoint_mapping[0].present) {
                usb_log_warning("Not accepting device, " \
                    "not boot-protocol keyboard.\n");
                return EREFUSED;
        }




        kbd_dev->conf = (usb_hid_configuration_t *)calloc(1, 
            sizeof(usb_hid_configuration_t));
        if (kbd_dev->conf == NULL) {
                free(descriptors);
                return ENOMEM;
        }
        
        /*rc = usbkbd_parse_descriptors(descriptors, transferred, kbd_dev->conf);
        free(descriptors);
        if (rc != EOK) {
                printf("Problem with parsing standard descriptors.\n");
                return rc;
        }

        // get and report descriptors*/
        rc = usbkbd_get_report_descriptor(kbd_dev);
        if (rc != EOK) {
                printf("Problem with parsing HID REPORT descriptor.\n");
                return rc;
        }
        
        //usbkbd_print_config(kbd_dev->conf);

        /*
         * TODO: 
         * 1) select one configuration (lets say the first)
         * 2) how many interfaces?? how to select one??
     *    ("The default setting for an interface is always alternate setting zero.")
         * 3) find endpoint which is IN and INTERRUPT (parse), save its number
     *    as the endpoint for polling
         */

        return EOK;
}

static usb_hid_dev_kbd_t *usbkbd_init_device(device_t *dev)
{
        int rc;

        usb_hid_dev_kbd_t *kbd_dev = (usb_hid_dev_kbd_t *)calloc(1, 
            sizeof(usb_hid_dev_kbd_t));

        if (kbd_dev == NULL) {
                fprintf(stderr, NAME ": No memory!\n");
                return NULL;
        }

        kbd_dev->device = dev;

        /*
         * Initialize the backing connection to the host controller.
         */
        rc = usb_device_connection_initialize_from_device(&kbd_dev->wire, dev);
        if (rc != EOK) {
                printf("Problem initializing connection to device: %s.\n",
                    str_error(rc));
                goto error_leave;
        }

        /*
         * Initialize device pipes.
         */
        rc = usb_endpoint_pipe_initialize_default_control(&kbd_dev->ctrl_pipe,
            &kbd_dev->wire);
        if (rc != EOK) {
                printf("Failed to initialize default control pipe: %s.\n",
                    str_error(rc));
                goto error_leave;
        }

        /*
         * will need all descriptors:
         * 1) choose one configuration from configuration descriptors
         *    (set it to the device)
         * 2) set endpoints from endpoint descriptors
         */

        // TODO: get descriptors, parse descriptors and save endpoints
        usb_endpoint_pipe_start_session(&kbd_dev->ctrl_pipe);
        //usb_request_set_configuration(&kbd_dev->ctrl_pipe, 1);
        rc = usbkbd_process_descriptors(kbd_dev);
        usb_endpoint_pipe_end_session(&kbd_dev->ctrl_pipe);
        if (rc != EOK) {
                goto error_leave;
        }

        return kbd_dev;

error_leave:
        free(kbd_dev);
        return NULL;
}

static void usbkbd_process_interrupt_in(usb_hid_dev_kbd_t *kbd_dev,
                                        uint8_t *buffer, size_t actual_size)
{
        usb_hid_report_in_callbacks_t *callbacks =
            (usb_hid_report_in_callbacks_t *)malloc(
                sizeof(usb_hid_report_in_callbacks_t));
        callbacks->keyboard = usbkbd_process_keycodes;

        //usb_hid_parse_report(kbd_dev->parser, buffer, actual_size, callbacks, 
        //    NULL);
        printf("Calling usb_hid_boot_keyboard_input_report() with size %zu\n",
            actual_size);
        //dump_buffer("bufffer: ", buffer, actual_size);
        int rc = usb_hid_boot_keyboard_input_report(buffer, actual_size, callbacks, 
            NULL);
        if (rc != EOK) {
                printf("Error in usb_hid_boot_keyboard_input_report(): %d\n", rc);
        }
}

static void usbkbd_poll_keyboard(usb_hid_dev_kbd_t *kbd_dev)
{
        int rc, sess_rc;
        uint8_t buffer[BUFFER_SIZE];
        size_t actual_size;

        printf("Polling keyboard...\n");

        while (true) {
                async_usleep(1000 * 10);

                sess_rc = usb_endpoint_pipe_start_session(&kbd_dev->poll_pipe);
                if (sess_rc != EOK) {
                        printf("Failed to start a session: %s.\n",
                            str_error(sess_rc));
                        continue;
                }

                rc = usb_endpoint_pipe_read(&kbd_dev->poll_pipe, buffer,
                    BUFFER_SIZE, &actual_size);
                sess_rc = usb_endpoint_pipe_end_session(&kbd_dev->poll_pipe);

                if (rc != EOK) {
                        printf("Error polling the keyboard: %s.\n",
                            str_error(rc));
                        continue;
                }

                if (sess_rc != EOK) {
                        printf("Error closing session: %s.\n",
                            str_error(sess_rc));
                        continue;
                }

                /*
                 * If the keyboard answered with NAK, it returned no data.
                 * This implies that no change happened since last query.
                 */
                if (actual_size == 0) {
                        printf("Keyboard returned NAK\n");
                        continue;
                }

                /*
                 * TODO: Process pressed keys.
                 */
                printf("Calling usbkbd_process_interrupt_in()\n");
                usbkbd_process_interrupt_in(kbd_dev, buffer, actual_size);
        }

        // not reached
        assert(0);
}

static int usbkbd_fibril_device(void *arg)
{
        printf("!!! USB device fibril\n");

        if (arg == NULL) {
                printf("No device!\n");
                return -1;
        }

        device_t *dev = (device_t *)arg;

        // initialize device (get and process descriptors, get address, etc.)
        usb_hid_dev_kbd_t *kbd_dev = usbkbd_init_device(dev);
        if (kbd_dev == NULL) {
                printf("Error while initializing device.\n");
                return -1;
        }

        usbkbd_poll_keyboard(kbd_dev);

        return EOK;
}

static int usbkbd_add_device(device_t *dev)
{
        /* For now, fail immediately. */
        //return ENOTSUP;

        /*
         * When everything is okay, connect to "our" HC.
         *
         * Not supported yet, skip..
         */
//      int phone = usb_drv_hc_connect_auto(dev, 0);
//      if (phone < 0) {
//              /*
//               * Connecting to HC failed, roll-back and announce
//               * failure.
//               */
//              return phone;
//      }

//      dev->parent_phone = phone;

        /*
         * Create new fibril for handling this keyboard
         */
        fid_t fid = fibril_create(usbkbd_fibril_device, dev);
        if (fid == 0) {
                printf("%s: failed to start fibril for HID device\n", NAME);
                return ENOMEM;
        }
        fibril_add_ready(fid);

        dev->ops = &keyboard_ops;

        add_device_to_class(dev, "keyboard");

        /*
         * Hurrah, device is initialized.
         */
        return EOK;
}

static driver_ops_t kbd_driver_ops = {
        .add_device = usbkbd_add_device,
};

static driver_t kbd_driver = {
        .name = NAME,
        .driver_ops = &kbd_driver_ops
};

int main(int argc, char *argv[])
{
        usb_log_enable(USB_LOG_LEVEL_INFO, "usbhid");
        return driver_main(&kbd_driver);
}

/**
 * @}
 */