source: mainline/uspace/drv/ohci/pci.c@ 7ab7c7f6

lfn serial ticket/834-toolchain-update topic/msim-upgrade topic/simplify-dev-export
Last change on this file since 7ab7c7f6 was f1d16663, checked in by Jan Vesely <jano.vesely@…>, 14 years ago

Postpone hw until all structures are initialized and irq handler registered

remove dead code
remove initial 5s wait

  • Property mode set to 100644
File size: 3.9 KB
Line 
1/*
2 * Copyright (c) 2011 Jan Vesely
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 *
9 * - Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * - Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * - The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 */
28/**
29 * @addtogroup drvusbohci
30 * @{
31 */
32/**
33 * @file
34 * PCI related functions needed by the OHCI driver.
35 */
36#include <errno.h>
37#include <assert.h>
38#include <as.h>
39#include <devman.h>
40#include <ddi.h>
41#include <libarch/ddi.h>
42#include <device/hw_res.h>
43
44#include <usb/debug.h>
45#include <pci_dev_iface.h>
46
47#include "pci.h"
48
49/** Get address of registers and IRQ for given device.
50 *
51 * @param[in] dev Device asking for the addresses.
52 * @param[out] mem_reg_address Base address of the memory range.
53 * @param[out] mem_reg_size Size of the memory range.
54 * @param[out] irq_no IRQ assigned to the device.
55 * @return Error code.
56 */
57int pci_get_my_registers(ddf_dev_t *dev,
58 uintptr_t *mem_reg_address, size_t *mem_reg_size, int *irq_no)
59{
60 assert(dev != NULL);
61
62 int parent_phone = devman_parent_device_connect(dev->handle,
63 IPC_FLAG_BLOCKING);
64 if (parent_phone < 0) {
65 return parent_phone;
66 }
67
68 int rc;
69
70 hw_resource_list_t hw_resources;
71 rc = hw_res_get_resource_list(parent_phone, &hw_resources);
72 if (rc != EOK) {
73 async_hangup(parent_phone);
74 return rc;
75 }
76
77 uintptr_t mem_address = 0;
78 size_t mem_size = 0;
79 bool mem_found = false;
80
81 int irq = 0;
82 bool irq_found = false;
83
84 size_t i;
85 for (i = 0; i < hw_resources.count; i++) {
86 hw_resource_t *res = &hw_resources.resources[i];
87 switch (res->type)
88 {
89 case INTERRUPT:
90 irq = res->res.interrupt.irq;
91 irq_found = true;
92 usb_log_debug2("Found interrupt: %d.\n", irq);
93 break;
94
95 case MEM_RANGE:
96 if (res->res.mem_range.address != 0
97 && res->res.mem_range.size != 0 ) {
98 mem_address = res->res.mem_range.address;
99 mem_size = res->res.mem_range.size;
100 usb_log_debug2("Found mem: %p %zu.\n",
101 (void *) mem_address, mem_size);
102 mem_found = true;
103 }
104 default:
105 break;
106 }
107 }
108
109 if (mem_found && irq_found) {
110 *mem_reg_address = mem_address;
111 *mem_reg_size = mem_size;
112 *irq_no = irq;
113 rc = EOK;
114 } else {
115 rc = ENOENT;
116 }
117
118 async_hangup(parent_phone);
119 return rc;
120}
121/*----------------------------------------------------------------------------*/
122/** Calls the PCI driver with a request to enable interrupts
123 *
124 * @param[in] device Device asking for interrupts
125 * @return Error code.
126 */
127int pci_enable_interrupts(ddf_dev_t *device)
128{
129 int parent_phone =
130 devman_parent_device_connect(device->handle, IPC_FLAG_BLOCKING);
131 if (parent_phone < 0) {
132 return parent_phone;
133 }
134 bool enabled = hw_res_enable_interrupt(parent_phone);
135 async_hangup(parent_phone);
136 return enabled ? EOK : EIO;
137}
138/**
139 * @}
140 */
141
142/**
143 * @}
144 */
Note: See TracBrowser for help on using the repository browser.