source: mainline/uspace/drv/nic/ar9271/wmi.c@ fb1007ef

/*
 * Copyright (c) 2014 Jan Kolarik
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * - Redistributions of source code must retain the above copyright
 *   notice, this list of conditions and the following disclaimer.
 * - Redistributions in binary form must reproduce the above copyright
 *   notice, this list of conditions and the following disclaimer in the
 *   documentation and/or other materials provided with the distribution.
 * - The name of the author may not be used to endorse or promote products
 *   derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/** @file wmi.c
 *
 * Implementation of Atheros WMI communication.
 *
 */

#include <usb/debug.h>
#include <errno.h>
#include <malloc.h>
#include <mem.h>
#include <byteorder.h>
#include "wmi.h"

/** WMI registry read.
 *
 * @param htc_device HTC device structure.
 * @param reg_offset Registry offset (address) to be read.
 * @param res        Stored result.
 *
 * @return EOK if succeed, negative error code otherwise.
 *
 */
int wmi_reg_read(htc_device_t *htc_device, uint32_t reg_offset, uint32_t *res)
{
        uint32_t cmd_value = host2uint32_t_be(reg_offset);
        
        void *resp_buffer =
            malloc(htc_device->ath_device->ctrl_response_length);
        
        int rc = wmi_send_command(htc_device, WMI_REG_READ,
            (uint8_t *) &cmd_value, sizeof(cmd_value), resp_buffer);
        
        if (rc != EOK) {
                usb_log_error("Failed to read registry value.\n");
                return rc;
        }
        
        uint32_t *resp_value = (uint32_t *) ((void *) resp_buffer +
            sizeof(htc_frame_header_t) + sizeof(wmi_command_header_t));
        
        *res = uint32_t_be2host(*resp_value);
        
        return rc;
}

/** WMI registry write.
 *
 * @param htc_device HTC device structure.
 * @param reg_offset Registry offset (address) to be written.
 * @param val        Value to be written
 *
 * @return EOK if succeed, negative error code otherwise.
 *
 */
int wmi_reg_write(htc_device_t *htc_device, uint32_t reg_offset, uint32_t val)
{
        uint32_t cmd_buffer[] = {
                host2uint32_t_be(reg_offset),
                host2uint32_t_be(val)
        };
        
        void *resp_buffer =
            malloc(htc_device->ath_device->ctrl_response_length);
        
        int rc = wmi_send_command(htc_device, WMI_REG_WRITE,
            (uint8_t *) &cmd_buffer, sizeof(cmd_buffer), resp_buffer);
        
        free(resp_buffer);
        
        if (rc != EOK) {
                usb_log_error("Failed to write registry value.\n");
                return rc;
        }
        
        return rc;
}

/** WMI registry set or clear specified bits.
 *
 * @param htc_device HTC device structure.
 * @param reg_offset Registry offset (address) to be written.
 * @param set_bit    Bit to be set.
 * @param clear_bit  Bit to be cleared.
 *
 * @return EOK if succeed, negative error code otherwise.
 *
 */
int wmi_reg_set_clear_bit(htc_device_t *htc_device, uint32_t reg_offset,
    uint32_t set_bit, uint32_t clear_bit)
{
        uint32_t value;
        
        int rc = wmi_reg_read(htc_device, reg_offset, &value);
        if (rc != EOK) {
                usb_log_error("Failed to read registry value in RMW "
                    "function.\n");
                return rc;
        }
        
        value &= ~clear_bit;
        value |= set_bit;
        
        rc = wmi_reg_write(htc_device, reg_offset, value);
        if (rc != EOK) {
                usb_log_error("Failed to write registry value in RMW "
                    "function.\n");
                return rc;
        }
        
        return rc;
}

/** WMI registry set specified bit.
 *
 * @param htc_device HTC device structure.
 * @param reg_offset Registry offset (address) to be written.
 * @param set_bit    Bit to be set.
 *
 * @return EOK if succeed, negative error code otherwise.
 *
 */
int wmi_reg_set_bit(htc_device_t *htc_device, uint32_t reg_offset,
    uint32_t set_bit)
{
        return wmi_reg_set_clear_bit(htc_device, reg_offset, set_bit, 0);
}

/** WMI registry clear specified bit.
 *
 * @param htc_device HTC device structure.
 * @param reg_offset Registry offset (address) to be written.
 * @param clear_bit  Bit to be cleared.
 *
 * @return EOK if succeed, negative error code otherwise.
 *
 */
int wmi_reg_clear_bit(htc_device_t *htc_device, uint32_t reg_offset,
    uint32_t clear_bit)
{
        return wmi_reg_set_clear_bit(htc_device, reg_offset, 0, clear_bit);
}

/** WMI multi registry write.
 *
 * @param htc_device HTC device structure.
 * @param reg_buffer Array of registry values to be written.
 * @param elements   Number of elements in array.
 *
 * @return EOK if succeed, negative error code otherwise.
 *
 */
int wmi_reg_buffer_write(htc_device_t *htc_device, wmi_reg_t *reg_buffer,
    size_t elements)
{
        size_t buffer_size = sizeof(wmi_reg_t) * elements;
        void *buffer = malloc(buffer_size);
        void *resp_buffer =
            malloc(htc_device->ath_device->ctrl_response_length);
        
        /* Convert values to correct endianness. */
        for (size_t i = 0; i < elements; i++) {
                wmi_reg_t *buffer_element = &reg_buffer[i];
                wmi_reg_t *buffer_it = (wmi_reg_t *)
                    ((void *) buffer + i * sizeof(wmi_reg_t));
                buffer_it->offset =
                    host2uint32_t_be(buffer_element->offset);
                buffer_it->value =
                    host2uint32_t_be(buffer_element->value);
        }
        
        int rc = wmi_send_command(htc_device, WMI_REG_WRITE,
            (uint8_t *) buffer, buffer_size, resp_buffer);
        
        free(buffer);
        free(resp_buffer);
        
        if (rc != EOK) {
                usb_log_error("Failed to write multi registry value.\n");
                return rc;
        }
        
        return rc;
}

/** Send WMI message to HTC device.
 *
 * @param htc_device      HTC device structure.
 * @param command_id      Command identification.
 * @param command_buffer  Buffer with command data.
 * @param command_length  Length of command data.
 * @param response_buffer Buffer with response data.
 *
 * @return EOK if succeed, negative error code otherwise.
 *
 */
int wmi_send_command(htc_device_t *htc_device, wmi_command_t command_id,
    uint8_t *command_buffer, uint32_t command_length, void *response_buffer)
{
        size_t header_size = sizeof(wmi_command_header_t) +
            sizeof(htc_frame_header_t);
        size_t buffer_size = header_size + command_length;
        void *buffer = malloc(buffer_size);
        
        if (command_buffer != NULL)
                memcpy(buffer+header_size, command_buffer, command_length);
        
        /* Set up WMI header */
        wmi_command_header_t *wmi_header = (wmi_command_header_t *)
            ((void *) buffer + sizeof(htc_frame_header_t));
        wmi_header->command_id = host2uint16_t_be(command_id);
        wmi_header->sequence_number =
            host2uint16_t_be(++htc_device->sequence_number);
        
        /* Send message. */
        int rc = htc_send_control_message(htc_device, buffer, buffer_size,
            htc_device->endpoints.wmi_endpoint);
        if (rc != EOK) {
                free(buffer);
                usb_log_error("Failed to send WMI message. Error: %d\n", rc);
                return rc;
        }
        
        free(buffer);
        
        bool clean_resp_buffer = false;
        size_t response_buffer_size =
            htc_device->ath_device->ctrl_response_length;
        if (response_buffer == NULL) {
                response_buffer = malloc(response_buffer_size);
                clean_resp_buffer = true;
        }
        
        /* Read response. */
        /* TODO: Ignoring WMI management RX messages ~ TX statuses etc. */
        uint16_t cmd_id;
        do {
                rc = htc_read_control_message(htc_device, response_buffer,
                    response_buffer_size, NULL);
                if (rc != EOK) {
                        free(buffer);
                        usb_log_error("Failed to receive WMI message response. "
                            "Error: %d\n", rc);
                        return rc;
                }
                
                if (response_buffer_size < sizeof(htc_frame_header_t) +
                    sizeof(wmi_command_header_t)) {
                        free(buffer);
                        usb_log_error("Corrupted response received.\n");
                        return EINVAL;
                }
                
                wmi_command_header_t *wmi_hdr = (wmi_command_header_t *)
                    ((void *) response_buffer + sizeof(htc_frame_header_t));
                cmd_id = uint16_t_be2host(wmi_hdr->command_id);
        } while(cmd_id & WMI_MGMT_CMD_MASK);
        
        if (clean_resp_buffer)
                free(response_buffer);
        
        return rc;
}