source: mainline/uspace/drv/ehci-hcd/main.c@ 57c0a7e

lfn serial ticket/834-toolchain-update topic/msim-upgrade topic/simplify-dev-export
Last change on this file since 57c0a7e was 40a5d40, checked in by Jan Vesely <jano.vesely@…>, 15 years ago

Add EHCI stub and implement BIOS handover.

  • Property mode set to 100644
File size: 3.1 KB
Line 
1/*
2 * Copyright (c) 2011 Vojtech Horky, Jan Vesely
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 *
9 * - Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * - Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * - The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 */
28/** @addtogroup usb
29 * @{
30 */
31/** @file
32 * @brief UHCI driver
33 */
34#include <ddf/driver.h>
35#include <ddf/interrupt.h>
36#include <device/hw_res.h>
37#include <errno.h>
38#include <str_error.h>
39
40#include <usb_iface.h>
41#include <usb/ddfiface.h>
42#include <usb/debug.h>
43
44#include "pci.h"
45
46#define NAME "ehci-hcd"
47
48static int ehci_add_device(ddf_dev_t *device);
49/*----------------------------------------------------------------------------*/
50static driver_ops_t ehci_driver_ops = {
51 .add_device = ehci_add_device,
52};
53/*----------------------------------------------------------------------------*/
54static driver_t ehci_driver = {
55 .name = NAME,
56 .driver_ops = &ehci_driver_ops
57};
58/*----------------------------------------------------------------------------*/
59static int ehci_add_device(ddf_dev_t *device)
60{
61 assert(device);
62#define CHECK_RET_RETURN(ret, message...) \
63if (ret != EOK) { \
64 usb_log_error(message); \
65 return ret; \
66}
67
68 usb_log_info("uhci_add_device() called\n");
69
70 uintptr_t mem_reg_base = 0;
71 size_t mem_reg_size = 0;
72 int irq = 0;
73
74 int ret =
75 pci_get_my_registers(device, &mem_reg_base, &mem_reg_size, &irq);
76 CHECK_RET_RETURN(ret,
77 "Failed(%d) to get memory addresses:.\n", ret, device->handle);
78 usb_log_info("Memory mapped regs at 0x%X (size %zu), IRQ %d.\n",
79 mem_reg_base, mem_reg_size, irq);
80
81 ret = pci_disable_legacy(device);
82 CHECK_RET_RETURN(ret,
83 "Failed(%d) disable legacy USB: %s.\n", ret, str_error(ret));
84
85 return EOK;
86#undef CHECK_RET_RETURN
87}
88/*----------------------------------------------------------------------------*/
89int main(int argc, char *argv[])
90{
91 usb_log_enable(USB_LOG_LEVEL_ERROR, NAME);
92 return ddf_driver_main(&ehci_driver);
93}
94/**
95 * @}
96 */
Note: See TracBrowser for help on using the repository browser.