/* * Copyright (c) 2017 Ondrej Hlavaty * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * - Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * - Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * - The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /** @addtogroup libusbhost * @{ */ /** @file * HC Endpoint management. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "hc.h" #include "bus.h" #include "endpoint.h" #include "hw_struct/context.h" #include "device.h" /** * Initial descriptor used for control endpoint 0, * before more configuration is retrieved. */ static const usb_endpoint_descriptors_t ep0_initial_desc = { .endpoint.max_packet_size = CTRL_PIPE_MIN_PACKET_SIZE, }; /** * Assign address and control endpoint to a new XHCI device. Once this function * successfully returns, the device is online. * * @param[in] bus XHCI bus, in which the address is assigned. * @param[in] dev New device to address and configure./e * @return Error code. */ static int address_device(xhci_device_t *dev) { int err; /* Enable new slot. */ if ((err = hc_enable_slot(dev)) != EOK) return err; usb_log_debug("Obtained slot ID: %u.", dev->slot_id); /* Temporary reference */ endpoint_t *ep0_base; if ((err = bus_endpoint_add(&dev->base, &ep0_initial_desc, &ep0_base))) goto err_slot; usb_log_debug("Looking up new device initial MPS: %s", usb_str_speed(dev->base.speed)); ep0_base->max_packet_size = hc_get_ep0_initial_mps(dev->base.speed); /* Address device */ if ((err = hc_address_device(dev))) goto err_added; /* Temporary reference */ endpoint_del_ref(ep0_base); return EOK; err_added: bus_endpoint_remove(ep0_base); /* Temporary reference */ endpoint_del_ref(ep0_base); err_slot: hc_disable_slot(dev); return err; } /** * Retrieve and set maximum packet size for endpoint zero of a XHCI device. * * @param[in] hc Host controller, which manages the device. * @param[in] dev Device with operational endpoint zero. * @return Error code. */ static int setup_ep0_packet_size(xhci_hc_t *hc, xhci_device_t *dev) { int err; uint16_t max_packet_size; if ((err = hc_get_ep0_max_packet_size(&max_packet_size, &dev->base))) return err; xhci_endpoint_t *ep0 = xhci_endpoint_get(dev->base.endpoints[0]); assert(ep0); if (ep0->base.max_packet_size == max_packet_size) return EOK; ep0->base.max_packet_size = max_packet_size; ep0->base.max_transfer_size = max_packet_size * ep0->base.packets_per_uframe; if ((err = hc_update_endpoint(ep0))) return err; return EOK; } /** * Check whether the device is a hub and if so, fill its characterstics. * * If this fails, it does not necessarily mean the device is unusable. * Just the TT will not work correctly. */ static int setup_hub(xhci_device_t *dev, usb_standard_device_descriptor_t *desc) { if (desc->device_class != USB_CLASS_HUB) return EOK; usb_hub_descriptor_header_t hub_desc = { 0 }; const int err = hc_get_hub_desc(&dev->base, &hub_desc); if (err) return err; dev->is_hub = 1; dev->num_ports = hub_desc.port_count; if (dev->base.speed == USB_SPEED_HIGH) { dev->tt_think_time = 8 + 8 * !!(hub_desc.characteristics & HUB_CHAR_TT_THINK_8) + 16 * !!(hub_desc.characteristics & HUB_CHAR_TT_THINK_16); } usb_log_debug("Device(%u): recognised USB hub with %u ports", dev->base.address, dev->num_ports); return EOK; } /** * Respond to a new device on the XHCI bus. Address it, negotiate packet size * and retrieve USB descriptors. * * @param[in] bus XHCI bus, where the new device emerged. * @param[in] dev XHCI device, which has appeared on the bus. * * @return Error code. */ int xhci_device_enumerate(device_t *dev) { int err; xhci_bus_t *bus = bus_to_xhci_bus(dev->bus); xhci_device_t *xhci_dev = xhci_device_get(dev); /* Calculate route string */ xhci_device_t *xhci_hub = xhci_device_get(dev->hub); xhci_dev->route_str = xhci_hub->route_str; /* Roothub port is not part of the route string */ if (dev->tier >= 2) { const unsigned offset = 4 * (dev->tier - 2); xhci_dev->route_str |= (dev->port & 0xf) << offset; xhci_dev->rh_port = xhci_hub->rh_port; } int retries = 3; do { /* Assign an address to the device */ err = address_device(xhci_dev); } while (err == ESTALL && --retries > 0); if (err) { usb_log_error("Failed to setup address of the new device: %s", str_error(err)); return err; } /* Setup EP0 might already need to issue a transfer. */ fibril_mutex_lock(&bus->base.guard); assert(bus->devices_by_slot[xhci_dev->slot_id] == NULL); bus->devices_by_slot[xhci_dev->slot_id] = xhci_dev; fibril_mutex_unlock(&bus->base.guard); if ((err = setup_ep0_packet_size(bus->hc, xhci_dev))) { usb_log_error("Failed to setup control endpoint " "of the new device: %s", str_error(err)); goto err_address; } usb_standard_device_descriptor_t desc = { 0 }; if ((err = hc_get_device_desc(dev, &desc))) { usb_log_error("Device(%d): failed to get device " "descriptor: %s", dev->address, str_error(err)); goto err_address; } if ((err = setup_hub(xhci_dev, &desc))) usb_log_warning("Device(%d): failed to setup hub " "characteristics: %s. Continuing anyway.", dev->address, str_error(err)); if ((err = hcd_ddf_setup_match_ids(dev, &desc))) { usb_log_error("Device(%d): failed to setup match IDs: %s", dev->address, str_error(err)); goto err_address; } return EOK; err_address: bus_endpoint_remove(xhci_dev->base.endpoints[0]); bus->devices_by_slot[xhci_dev->slot_id] = NULL; hc_disable_slot(xhci_dev); return err; } /** * Remove device from XHCI bus. Transition it to the offline state, abort all * ongoing transfers and unregister all of its endpoints. * * Bus callback. * * @param[in] bus XHCI bus, from which the device is removed. * @param[in] dev XHCI device, which is removed from the bus. * @return Error code. */ void xhci_device_gone(device_t *dev) { int err; xhci_bus_t *bus = bus_to_xhci_bus(dev->bus); xhci_device_t *xhci_dev = xhci_device_get(dev); /* Disable the slot, dropping all endpoints. */ const uint32_t slot_id = xhci_dev->slot_id; if ((err = hc_disable_slot(xhci_dev))) { usb_log_warning("Failed to disable slot of device " XHCI_DEV_FMT ": %s", XHCI_DEV_ARGS(*xhci_dev), str_error(err)); } bus->devices_by_slot[slot_id] = NULL; } /** * Reverts things device_offline did, getting the device back up. * * Bus callback. */ int xhci_device_online(device_t *dev_base) { int err; xhci_bus_t *bus = bus_to_xhci_bus(dev_base->bus); assert(bus); xhci_device_t *dev = xhci_device_get(dev_base); assert(dev); /* Transition the device from the Addressed to the Configured state. */ if ((err = hc_configure_device(dev))) { usb_log_warning("Failed to configure device " XHCI_DEV_FMT ".", XHCI_DEV_ARGS(*dev)); return err; } return EOK; } /** * Make given device offline. Offline the DDF function, tear down all * endpoints, issue Deconfigure Device command to xHC. * * Bus callback. */ void xhci_device_offline(device_t *dev_base) { int err; xhci_bus_t *bus = bus_to_xhci_bus(dev_base->bus); assert(bus); xhci_device_t *dev = xhci_device_get(dev_base); assert(dev); /* Issue one HC command to simultaneously drop all endpoints except zero. */ if ((err = hc_deconfigure_device(dev))) { usb_log_warning("Failed to deconfigure device " XHCI_DEV_FMT ".", XHCI_DEV_ARGS(*dev)); } } /** * Fill a slot context that is part of an Input Context with appropriate * values. * * @param ctx Slot context, zeroed out. */ void xhci_setup_slot_context(xhci_device_t *dev, xhci_slot_ctx_t *ctx) { /* Initialize slot_ctx according to section 4.3.3 point 3. */ XHCI_SLOT_ROOT_HUB_PORT_SET(*ctx, dev->rh_port); XHCI_SLOT_ROUTE_STRING_SET(*ctx, dev->route_str); XHCI_SLOT_SPEED_SET(*ctx, hc_speed_to_psiv(dev->base.speed)); /* * Note: This function is used even before this flag can be set, to * issue the address device command. It is OK, because these * flags are not required to be valid for that command. */ if (dev->is_hub) { XHCI_SLOT_HUB_SET(*ctx, 1); XHCI_SLOT_NUM_PORTS_SET(*ctx, dev->num_ports); XHCI_SLOT_TT_THINK_TIME_SET(*ctx, dev->tt_think_time); XHCI_SLOT_MTT_SET(*ctx, 0); // MTT not supported yet } /* Setup Transaction Translation. TODO: Test this with HS hub. */ if (dev->base.tt.dev != NULL) { xhci_device_t *hub = xhci_device_get(dev->base.tt.dev); XHCI_SLOT_TT_HUB_SLOT_ID_SET(*ctx, hub->slot_id); XHCI_SLOT_TT_HUB_PORT_SET(*ctx, dev->base.tt.port); } /* * As we always allocate space for whole input context, we can set this * to maximum. The only exception being Address Device command, which * explicitly requires this to be se to 1. */ XHCI_SLOT_CTX_ENTRIES_SET(*ctx, 31); } /** * @} */