source: mainline/uspace/drv/bus/usb/vhc/connhost.c@ bc255aa

/*
 * Copyright (c) 2011 Vojtech Horky
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * - Redistributions of source code must retain the above copyright
 *   notice, this list of conditions and the following disclaimer.
 * - Redistributions in binary form must reproduce the above copyright
 *   notice, this list of conditions and the following disclaimer in the
 *   documentation and/or other materials provided with the distribution.
 * - The name of the author may not be used to endorse or promote products
 *   derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/** @addtogroup drvusbvhc
 * @{
 */
/** @file
 * Host controller interface implementation.
 */
#include <assert.h>
#include <errno.h>
#include <usb/usb.h>
#include <usb/ddfiface.h>
#include <usb/debug.h>
#include <usbhc_iface.h>
#include "vhcd.h"

#define GET_VHC_DATA(fun) \
        ((vhc_data_t *)fun->dev->driver_data)
#define VHC_DATA(vhc, fun) \
        vhc_data_t *vhc = GET_VHC_DATA(fun); assert(vhc->magic == 0xdeadbeef)

#define UNSUPPORTED(methodname) \
        usb_log_warning("Unsupported interface method `%s()' in %s:%d.\n", \
            methodname, __FILE__, __LINE__)

/** Found free USB address.
 *
 * @param[in] fun Device function the action was invoked on.
 * @param[in] speed Speed of the device that will get this address.
 * @param[out] address Non-null pointer where to store the free address.
 * @return Error code.
 */
static int request_address(ddf_fun_t *fun, usb_speed_t speed,
    usb_address_t *address)
{
        VHC_DATA(vhc, fun);

        usb_address_t addr = usb_device_manager_get_free_address(
            &vhc->dev_manager, USB_SPEED_HIGH);
        if (addr < 0) {
                return addr;
        }

        if (address != NULL) {
                *address = addr;
        }

        return EOK;
}

/** Bind USB address with device devman handle.
 *
 * @param[in] fun Device function the action was invoked on.
 * @param[in] address USB address of the device.
 * @param[in] handle Devman handle of the device.
 * @return Error code.
 */
static int bind_address(ddf_fun_t *fun,
    usb_address_t address, devman_handle_t handle)
{
        VHC_DATA(vhc, fun);
        usb_log_debug("Binding handle %" PRIun " to address %d.\n",
            handle, address);
        usb_device_manager_bind(&vhc->dev_manager, address, handle);

        return EOK;
}

/** Find device handle by address interface function.
 *
 * @param[in] fun DDF function that was called.
 * @param[in] address Address in question.
 * @param[out] handle Where to store device handle if found.
 * @return Error code.
 */
static int find_by_address(ddf_fun_t *fun, usb_address_t address,
    devman_handle_t *handle)
{
        VHC_DATA(vhc, fun);
        bool found =
            usb_device_manager_find_by_address(&vhc->dev_manager, address, handle);
        return found ? EOK : ENOENT;
}

/** Release previously requested address.
 *
 * @param[in] fun Device function the action was invoked on.
 * @param[in] address USB address to be released.
 * @return Error code.
 */
static int release_address(ddf_fun_t *fun, usb_address_t address)
{
        VHC_DATA(vhc, fun);
        usb_log_debug("Releasing address %d...\n", address);
        usb_device_manager_release(&vhc->dev_manager, address);

        return ENOTSUP;
}

/** Register endpoint for bandwidth reservation.
 *
 * @param[in] fun Device function the action was invoked on.
 * @param[in] address USB address of the device.
 * @param[in] speed Endpoint speed (invalid means to use device one).
 * @param[in] endpoint Endpoint number.
 * @param[in] transfer_type USB transfer type.
 * @param[in] direction Endpoint data direction.
 * @param[in] max_packet_size Max packet size of the endpoint.
 * @param[in] interval Polling interval.
 * @return Error code.
 */
static int register_endpoint(ddf_fun_t *fun,
    usb_address_t address, usb_speed_t speed, usb_endpoint_t endpoint,
    usb_transfer_type_t transfer_type, usb_direction_t direction,
    size_t max_packet_size, unsigned int interval)
{
        /* TODO: Use usb_endpoint_manager_add_ep */
        VHC_DATA(vhc, fun);

        endpoint_t *ep = endpoint_get(
            address, endpoint, direction, transfer_type, USB_SPEED_FULL, 1);
        if (ep == NULL) {
                return ENOMEM;
        }

        int rc = usb_endpoint_manager_register_ep(&vhc->ep_manager, ep, 1);
        if (rc != EOK) {
                endpoint_destroy(ep);
                return rc;
        }

        return EOK;
}

/** Unregister endpoint (free some bandwidth reservation).
 *
 * @param[in] fun Device function the action was invoked on.
 * @param[in] address USB address of the device.
 * @param[in] endpoint Endpoint number.
 * @param[in] direction Endpoint data direction.
 * @return Error code.
 */
static int unregister_endpoint(ddf_fun_t *fun, usb_address_t address,
    usb_endpoint_t endpoint, usb_direction_t direction)
{
        VHC_DATA(vhc, fun);

        int rc = usb_endpoint_manager_unregister_ep(&vhc->ep_manager,
            address, endpoint, direction);

        return rc;
}
#if 0
/** Schedule interrupt out transfer.
 *
 * The callback is supposed to be called once the transfer (on the wire) is
 * complete regardless of the outcome.
 * However, the callback could be called only when this function returns
 * with success status (i.e. returns EOK).
 *
 * @param[in] fun Device function the action was invoked on.
 * @param[in] target Target pipe (address and endpoint number) specification.
 * @param[in] data Data to be sent (in USB endianess, allocated and deallocated
 *      by the caller).
 * @param[in] size Size of the @p data buffer in bytes.
 * @param[in] callback Callback to be issued once the transfer is complete.
 * @param[in] arg Pass-through argument to the callback.
 * @return Error code.
 */
static int interrupt_out(ddf_fun_t *fun, usb_target_t target,
    void *data, size_t size,
    usbhc_iface_transfer_out_callback_t callback, void *arg)
{
        VHC_DATA(vhc, fun);

        vhc_transfer_t *transfer = vhc_transfer_create(target.address,
            target.endpoint, USB_DIRECTION_OUT, USB_TRANSFER_INTERRUPT,
            fun, arg);
        if (transfer == NULL) {
                return ENOMEM;
        }

        transfer->data_buffer = data;
        transfer->data_buffer_size = size;
        transfer->callback_out = callback;

        int rc = vhc_virtdev_add_transfer(vhc, transfer);
        if (rc != EOK) {
                free(transfer);
                return rc;
        }

        return EOK;
}

/** Schedule interrupt in transfer.
 *
 * The callback is supposed to be called once the transfer (on the wire) is
 * complete regardless of the outcome.
 * However, the callback could be called only when this function returns
 * with success status (i.e. returns EOK).
 *
 * @param[in] fun Device function the action was invoked on.
 * @param[in] target Target pipe (address and endpoint number) specification.
 * @param[in] data Buffer where to store the data (in USB endianess,
 *      allocated and deallocated by the caller).
 * @param[in] size Size of the @p data buffer in bytes.
 * @param[in] callback Callback to be issued once the transfer is complete.
 * @param[in] arg Pass-through argument to the callback.
 * @return Error code.
 */
static int interrupt_in(ddf_fun_t *fun, usb_target_t target,
    void *data, size_t size,
    usbhc_iface_transfer_in_callback_t callback, void *arg)
{
        VHC_DATA(vhc, fun);

        vhc_transfer_t *transfer = vhc_transfer_create(target.address,
            target.endpoint, USB_DIRECTION_IN, USB_TRANSFER_INTERRUPT,
            fun, arg);
        if (transfer == NULL) {
                return ENOMEM;
        }

        transfer->data_buffer = data;
        transfer->data_buffer_size = size;
        transfer->callback_in = callback;

        int rc = vhc_virtdev_add_transfer(vhc, transfer);
        if (rc != EOK) {
                free(transfer);
                return rc;
        }

        return EOK;
}

/** Schedule bulk out transfer.
 *
 * The callback is supposed to be called once the transfer (on the wire) is
 * complete regardless of the outcome.
 * However, the callback could be called only when this function returns
 * with success status (i.e. returns EOK).
 *
 * @param[in] fun Device function the action was invoked on.
 * @param[in] target Target pipe (address and endpoint number) specification.
 * @param[in] data Data to be sent (in USB endianess, allocated and deallocated
 *      by the caller).
 * @param[in] size Size of the @p data buffer in bytes.
 * @param[in] callback Callback to be issued once the transfer is complete.
 * @param[in] arg Pass-through argument to the callback.
 * @return Error code.
 */
static int bulk_out(ddf_fun_t *fun, usb_target_t target,
    void *data, size_t size,
    usbhc_iface_transfer_out_callback_t callback, void *arg)
{
        UNSUPPORTED("bulk_out");

        return ENOTSUP;
}

/** Schedule bulk in transfer.
 *
 * The callback is supposed to be called once the transfer (on the wire) is
 * complete regardless of the outcome.
 * However, the callback could be called only when this function returns
 * with success status (i.e. returns EOK).
 *
 * @param[in] fun Device function the action was invoked on.
 * @param[in] target Target pipe (address and endpoint number) specification.
 * @param[in] data Buffer where to store the data (in USB endianess,
 *      allocated and deallocated by the caller).
 * @param[in] size Size of the @p data buffer in bytes.
 * @param[in] callback Callback to be issued once the transfer is complete.
 * @param[in] arg Pass-through argument to the callback.
 * @return Error code.
 */
static int bulk_in(ddf_fun_t *fun, usb_target_t target,
    void *data, size_t size,
    usbhc_iface_transfer_in_callback_t callback, void *arg)
{
        UNSUPPORTED("bulk_in");

        return ENOTSUP;
}

/** Schedule control write transfer.
 *
 * The callback is supposed to be called once the transfer (on the wire) is
 * complete regardless of the outcome.
 * However, the callback could be called only when this function returns
 * with success status (i.e. returns EOK).
 *
 * @param[in] fun Device function the action was invoked on.
 * @param[in] target Target pipe (address and endpoint number) specification.
 * @param[in] setup_packet Setup packet buffer (in USB endianess, allocated
 *      and deallocated by the caller).
 * @param[in] setup_packet_size Size of @p setup_packet buffer in bytes.
 * @param[in] data_buffer Data buffer (in USB endianess, allocated and
 *      deallocated by the caller).
 * @param[in] data_buffer_size Size of @p data_buffer buffer in bytes.
 * @param[in] callback Callback to be issued once the transfer is complete.
 * @param[in] arg Pass-through argument to the callback.
 * @return Error code.
 */
static int control_write(ddf_fun_t *fun, usb_target_t target,
    void *setup_packet, size_t setup_packet_size,
    void *data_buffer, size_t data_buffer_size,
    usbhc_iface_transfer_out_callback_t callback, void *arg)
{
        VHC_DATA(vhc, fun);

        vhc_transfer_t *transfer = vhc_transfer_create(target.address,
            target.endpoint, USB_DIRECTION_OUT, USB_TRANSFER_CONTROL,
            fun, arg);
        if (transfer == NULL) {
                return ENOMEM;
        }

        transfer->setup_buffer = setup_packet;
        transfer->setup_buffer_size = setup_packet_size;
        transfer->data_buffer = data_buffer;
        transfer->data_buffer_size = data_buffer_size;
        transfer->callback_out = callback;

        int rc = vhc_virtdev_add_transfer(vhc, transfer);
        if (rc != EOK) {
                free(transfer);
                return rc;
        }

        return EOK;
}

/** Schedule control read transfer.
 *
 * The callback is supposed to be called once the transfer (on the wire) is
 * complete regardless of the outcome.
 * However, the callback could be called only when this function returns
 * with success status (i.e. returns EOK).
 *
 * @param[in] fun Device function the action was invoked on.
 * @param[in] target Target pipe (address and endpoint number) specification.
 * @param[in] setup_packet Setup packet buffer (in USB endianess, allocated
 *      and deallocated by the caller).
 * @param[in] setup_packet_size Size of @p setup_packet buffer in bytes.
 * @param[in] data_buffer Buffer where to store the data (in USB endianess,
 *      allocated and deallocated by the caller).
 * @param[in] data_buffer_size Size of @p data_buffer buffer in bytes.
 * @param[in] callback Callback to be issued once the transfer is complete.
 * @param[in] arg Pass-through argument to the callback.
 * @return Error code.
 */
static int control_read(ddf_fun_t *fun, usb_target_t target,
    void *setup_packet, size_t setup_packet_size,
    void *data_buffer, size_t data_buffer_size,
    usbhc_iface_transfer_in_callback_t callback, void *arg)
{
        VHC_DATA(vhc, fun);

        vhc_transfer_t *transfer = vhc_transfer_create(target.address,
            target.endpoint, USB_DIRECTION_IN, USB_TRANSFER_CONTROL,
            fun, arg);
        if (transfer == NULL) {
                return ENOMEM;
        }

        transfer->setup_buffer = setup_packet;
        transfer->setup_buffer_size = setup_packet_size;
        transfer->data_buffer = data_buffer;
        transfer->data_buffer_size = data_buffer_size;
        transfer->callback_in = callback;

        int rc = vhc_virtdev_add_transfer(vhc, transfer);
        if (rc != EOK) {
                free(transfer);
                return rc;
        }

        return EOK;
}
#endif
static int usb_read(ddf_fun_t *fun, usb_target_t target, uint64_t setup_buffer,
    uint8_t *data_buffer, size_t data_buffer_size,
    usbhc_iface_transfer_in_callback_t callback, void *arg)
{
        VHC_DATA(vhc, fun);

        endpoint_t *ep = usb_endpoint_manager_get_ep(&vhc->ep_manager,
            target.address, target.endpoint, USB_DIRECTION_IN, NULL);
        if (ep == NULL) {
                return ENOENT;
        }
        const usb_transfer_type_t transfer_type = ep->transfer_type;


        vhc_transfer_t *transfer = vhc_transfer_create(target.address,
            target.endpoint, USB_DIRECTION_IN, transfer_type,
            fun, arg);
        if (transfer == NULL) {
                return ENOMEM;
        }
        if (transfer_type == USB_TRANSFER_CONTROL) {
                transfer->setup_buffer = malloc(sizeof(uint64_t));
                assert(transfer->setup_buffer);
                memcpy(transfer->setup_buffer, &setup_buffer, sizeof(uint64_t));
                transfer->setup_buffer_size = sizeof(uint64_t);
        }
        transfer->data_buffer = data_buffer;
        transfer->data_buffer_size = data_buffer_size;
        transfer->callback_in = callback;

        int rc = vhc_virtdev_add_transfer(vhc, transfer);
        if (rc != EOK) {
                free(transfer->setup_buffer);
                free(transfer);
                return rc;
        }

        return EOK;
}

static int usb_write(ddf_fun_t *fun, usb_target_t target, uint64_t setup_buffer,
    const uint8_t *data_buffer, size_t data_buffer_size,
    usbhc_iface_transfer_out_callback_t callback, void *arg)
{
        VHC_DATA(vhc, fun);

        endpoint_t *ep = usb_endpoint_manager_get_ep(&vhc->ep_manager,
            target.address, target.endpoint, USB_DIRECTION_OUT, NULL);
        if (ep == NULL) {
                return ENOENT;
        }
        const usb_transfer_type_t transfer_type = ep->transfer_type;


        vhc_transfer_t *transfer = vhc_transfer_create(target.address,
            target.endpoint, USB_DIRECTION_OUT, transfer_type,
            fun, arg);
        if (transfer == NULL) {
                return ENOMEM;
        }
        if (transfer_type == USB_TRANSFER_CONTROL) {
                transfer->setup_buffer = malloc(sizeof(uint64_t));
                assert(transfer->setup_buffer);
                memcpy(transfer->setup_buffer, &setup_buffer, sizeof(uint64_t));
                transfer->setup_buffer_size = sizeof(uint64_t);
        }
        transfer->data_buffer = (void*)data_buffer;
        transfer->data_buffer_size = data_buffer_size;
        transfer->callback_out = callback;

        int rc = vhc_virtdev_add_transfer(vhc, transfer);
        if (rc != EOK) {
                free(transfer->setup_buffer);
                free(transfer);
                return rc;
        }

        return EOK;
}

static int tell_address(ddf_fun_t *fun, devman_handle_t handle,
    usb_address_t *address)
{
        UNSUPPORTED("tell_address");

        return ENOTSUP;
}

static int usb_iface_get_hc_handle_rh_impl(ddf_fun_t *root_hub_fun,
    devman_handle_t *handle)
{
        VHC_DATA(vhc, root_hub_fun);

        *handle = vhc->hc_fun->handle;

        return EOK;
}

static int tell_address_rh(ddf_fun_t *root_hub_fun, devman_handle_t handle,
    usb_address_t *address)
{
        VHC_DATA(vhc, root_hub_fun);

        if (handle == 0) {
                handle = root_hub_fun->handle;
        }

        usb_log_debug("tell_address_rh(handle=%" PRIun ")\n", handle);
        usb_address_t addr = usb_device_manager_find(&vhc->dev_manager, handle);
        if (addr < 0) {
                return addr;
        } else {
                *address = addr;
                return EOK;
        }
}

usbhc_iface_t vhc_iface = {
        .request_address = request_address,
        .bind_address = bind_address,
        .find_by_address = find_by_address,
        .release_address = release_address,

        .register_endpoint = register_endpoint,
        .unregister_endpoint = unregister_endpoint,

        .write = usb_write,
        .read = usb_read,
};

usb_iface_t vhc_usb_iface = {
        .get_hc_handle = usb_iface_get_hc_handle_hc_impl,
        .get_address = tell_address
};

usb_iface_t rh_usb_iface = {
        .get_hc_handle = usb_iface_get_hc_handle_rh_impl,
        .get_address = tell_address_rh
};


/**
 * @}
 */