source: mainline/uspace/drv/bus/usb/uhcirh/main.c@ 193da9d6

lfn serial ticket/834-toolchain-update topic/msim-upgrade topic/simplify-dev-export
Last change on this file since 193da9d6 was 5203e256, checked in by Martin Decky <martin@…>, 14 years ago

keep the drivers source tree tidy by using logical subdirectories

  • Property mode set to 100644
File size: 4.9 KB
Line 
1/*
2 * Copyright (c) 2011 Jan Vesely
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 *
9 * - Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * - Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * - The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 */
28
29/** @addtogroup drvusbuhcirh
30 * @{
31 */
32/** @file
33 * @brief UHCI root hub initialization routines
34 */
35
36#include <ddf/driver.h>
37#include <devman.h>
38#include <device/hw_res.h>
39#include <errno.h>
40#include <str_error.h>
41
42#include <usb_iface.h>
43#include <usb/ddfiface.h>
44#include <usb/debug.h>
45
46#include "root_hub.h"
47
48#define NAME "uhcirh"
49
50static int hc_get_my_registers(const ddf_dev_t *dev,
51 uintptr_t *io_reg_address, size_t *io_reg_size);
52
53static int uhci_rh_add_device(ddf_dev_t *device);
54
55static driver_ops_t uhci_rh_driver_ops = {
56 .add_device = uhci_rh_add_device,
57};
58
59static driver_t uhci_rh_driver = {
60 .name = NAME,
61 .driver_ops = &uhci_rh_driver_ops
62};
63
64/** Initialize global driver structures (NONE).
65 *
66 * @param[in] argc Nmber of arguments in argv vector (ignored).
67 * @param[in] argv Cmdline argument vector (ignored).
68 * @return Error code.
69 *
70 * Driver debug level is set here.
71 */
72int main(int argc, char *argv[])
73{
74 printf(NAME ": HelenOS UHCI root hub driver.\n");
75 usb_log_enable(USB_LOG_LEVEL_DEFAULT, NAME);
76 return ddf_driver_main(&uhci_rh_driver);
77}
78
79/** Initialize a new ddf driver instance of UHCI root hub.
80 *
81 * @param[in] device DDF instance of the device to initialize.
82 * @return Error code.
83 */
84static int uhci_rh_add_device(ddf_dev_t *device)
85{
86 if (!device)
87 return EINVAL;
88
89 usb_log_debug2("uhci_rh_add_device(handle=%" PRIun ")\n",
90 device->handle);
91
92 uintptr_t io_regs = 0;
93 size_t io_size = 0;
94 uhci_root_hub_t *rh = NULL;
95 int ret = EOK;
96
97#define CHECK_RET_FREE_RH_RETURN(ret, message...) \
98if (ret != EOK) { \
99 usb_log_error(message); \
100 if (rh) \
101 free(rh); \
102 return ret; \
103} else (void)0
104
105 ret = hc_get_my_registers(device, &io_regs, &io_size);
106 CHECK_RET_FREE_RH_RETURN(ret,
107 "Failed to get registers from HC: %s.\n", str_error(ret));
108 usb_log_debug("I/O regs at %p (size %zuB).\n",
109 (void *) io_regs, io_size);
110
111 rh = malloc(sizeof(uhci_root_hub_t));
112 ret = (rh == NULL) ? ENOMEM : EOK;
113 CHECK_RET_FREE_RH_RETURN(ret,
114 "Failed to allocate rh driver instance.\n");
115
116 ret = uhci_root_hub_init(rh, (void*)io_regs, io_size, device);
117 CHECK_RET_FREE_RH_RETURN(ret,
118 "Failed(%d) to initialize rh driver instance: %s.\n",
119 ret, str_error(ret));
120
121 device->driver_data = rh;
122 usb_log_info("Controlling root hub '%s' (%" PRIun ").\n",
123 device->name, device->handle);
124 return EOK;
125}
126
127/** Get address of I/O registers.
128 *
129 * @param[in] dev Device asking for the addresses.
130 * @param[out] io_reg_address Base address of the memory range.
131 * @param[out] io_reg_size Size of the memory range.
132 * @return Error code.
133 */
134int hc_get_my_registers(
135 const ddf_dev_t *dev, uintptr_t *io_reg_address, size_t *io_reg_size)
136{
137 assert(dev);
138
139 async_sess_t *parent_sess =
140 devman_parent_device_connect(EXCHANGE_SERIALIZE, dev->handle,
141 IPC_FLAG_BLOCKING);
142 if (!parent_sess)
143 return ENOMEM;
144
145 hw_resource_list_t hw_resources;
146 const int ret = hw_res_get_resource_list(parent_sess, &hw_resources);
147 if (ret != EOK) {
148 async_hangup(parent_sess);
149 return ret;
150 }
151
152 uintptr_t io_address = 0;
153 size_t io_size = 0;
154 bool io_found = false;
155
156 size_t i = 0;
157 for (; i < hw_resources.count; i++) {
158 hw_resource_t *res = &hw_resources.resources[i];
159 if (res->type == IO_RANGE) {
160 io_address = res->res.io_range.address;
161 io_size = res->res.io_range.size;
162 io_found = true;
163 }
164
165 }
166 async_hangup(parent_sess);
167
168 if (!io_found)
169 return ENOENT;
170
171 if (io_reg_address != NULL)
172 *io_reg_address = io_address;
173
174 if (io_reg_size != NULL)
175 *io_reg_size = io_size;
176
177 return EOK;
178}
179
180/**
181 * @}
182 */
Note: See TracBrowser for help on using the repository browser.