source: mainline/uspace/drv/bus/usb/uhci/uhci.c@ ad91b806

lfn serial ticket/834-toolchain-update topic/msim-upgrade topic/simplify-dev-export
Last change on this file since ad91b806 was b500d60a, checked in by Jan Vesely <jano.vesely@…>, 14 years ago

uhci: UHCI root hub does not have an address.

  • Property mode set to 100644
File size: 8.5 KB
Line 
1/*
2 * Copyright (c) 2011 Jan Vesely
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 *
9 * - Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * - Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * - The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 */
28
29/** @addtogroup drvusbuhci
30 * @{
31 */
32/** @file
33 * @brief UHCI driver
34 */
35#include <errno.h>
36#include <str_error.h>
37#include <ddf/interrupt.h>
38#include <usb_iface.h>
39#include <usb/ddfiface.h>
40#include <usb/debug.h>
41
42#include "uhci.h"
43#include "pci.h"
44
45#include "hc.h"
46#include "root_hub.h"
47
48/** Structure representing both functions of UHCI hc, USB host controller
49 * and USB root hub */
50typedef struct uhci {
51 /** Pointer to DDF represenation of UHCI host controller */
52 ddf_fun_t *hc_fun;
53 /** Pointer to DDF represenation of UHCI root hub */
54 ddf_fun_t *rh_fun;
55
56 /** Internal driver's represenation of UHCI host controller */
57 hc_t hc;
58 /** Internal driver's represenation of UHCI root hub */
59 rh_t rh;
60} uhci_t;
61
62static inline uhci_t * dev_to_uhci(const ddf_dev_t *dev)
63{
64 assert(dev);
65 return dev->driver_data;
66}
67/*----------------------------------------------------------------------------*/
68/** IRQ handling callback, forward status from call to diver structure.
69 *
70 * @param[in] dev DDF instance of the device to use.
71 * @param[in] iid (Unused).
72 * @param[in] call Pointer to the call from kernel.
73 */
74static void irq_handler(ddf_dev_t *dev, ipc_callid_t iid, ipc_call_t *call)
75{
76 assert(dev);
77 uhci_t *uhci = dev_to_uhci(dev);
78 if (!uhci) {
79 usb_log_error("Interrupt on not yet initialized device.\n");
80 return;
81 }
82 const uint16_t status = IPC_GET_ARG1(*call);
83 hc_interrupt(&uhci->hc, status);
84}
85/*----------------------------------------------------------------------------*/
86/** Operations supported by the HC driver */
87static ddf_dev_ops_t hc_ops = {
88 .interfaces[USBHC_DEV_IFACE] = &hcd_iface, /* see iface.h/c */
89};
90/*----------------------------------------------------------------------------*/
91/** Gets handle of the respective hc.
92 *
93 * @param[in] fun DDF function of uhci device.
94 * @param[out] handle Host cotnroller handle.
95 * @return Error code.
96 */
97static int usb_iface_get_hc_handle(ddf_fun_t *fun, devman_handle_t *handle)
98{
99 assert(fun);
100 ddf_fun_t *hc_fun = dev_to_uhci(fun->dev)->hc_fun;
101 assert(hc_fun);
102
103 if (handle != NULL)
104 *handle = hc_fun->handle;
105 return EOK;
106}
107/*----------------------------------------------------------------------------*/
108/** USB interface implementation used by RH */
109static usb_iface_t usb_iface = {
110 .get_hc_handle = usb_iface_get_hc_handle,
111};
112/*----------------------------------------------------------------------------*/
113/** Get root hub hw resources (I/O registers).
114 *
115 * @param[in] fun Root hub function.
116 * @return Pointer to the resource list used by the root hub.
117 */
118static hw_resource_list_t *get_resource_list(ddf_fun_t *fun)
119{
120 assert(fun);
121 rh_t *rh = fun->driver_data;
122 assert(rh);
123 return &rh->resource_list;
124}
125/*----------------------------------------------------------------------------*/
126/** Interface to provide the root hub driver with hw info */
127static hw_res_ops_t hw_res_iface = {
128 .get_resource_list = get_resource_list,
129 .enable_interrupt = NULL,
130};
131/*----------------------------------------------------------------------------*/
132/** RH function support for uhci_rhd */
133static ddf_dev_ops_t rh_ops = {
134 .interfaces[USB_DEV_IFACE] = &usb_iface,
135 .interfaces[HW_RES_DEV_IFACE] = &hw_res_iface
136};
137/*----------------------------------------------------------------------------*/
138/** Initialize hc and rh DDF structures and their respective drivers.
139 *
140 * @param[in] device DDF instance of the device to use.
141 *
142 * This function does all the preparatory work for hc and rh drivers:
143 * - gets device's hw resources
144 * - disables UHCI legacy support (PCI config space)
145 * - attempts to enable interrupts
146 * - registers interrupt handler
147 */
148int device_setup_uhci(ddf_dev_t *device)
149{
150 assert(device);
151 uhci_t *instance = malloc(sizeof(uhci_t));
152 if (instance == NULL) {
153 usb_log_error("Failed to allocate OHCI driver.\n");
154 return ENOMEM;
155 }
156
157#define CHECK_RET_DEST_FREE_RETURN(ret, message...) \
158if (ret != EOK) { \
159 if (instance->hc_fun) \
160 instance->hc_fun->ops = NULL; \
161 instance->hc_fun->driver_data = NULL; \
162 ddf_fun_destroy(instance->hc_fun); \
163 if (instance->rh_fun) {\
164 instance->rh_fun->ops = NULL; \
165 instance->rh_fun->driver_data = NULL; \
166 ddf_fun_destroy(instance->rh_fun); \
167 } \
168 device->driver_data = NULL; \
169 usb_log_error(message); \
170 return ret; \
171} else (void)0
172
173 instance->rh_fun = NULL;
174 instance->hc_fun = ddf_fun_create(device, fun_exposed, "uhci_hc");
175 int ret = (instance->hc_fun == NULL) ? ENOMEM : EOK;
176 CHECK_RET_DEST_FREE_RETURN(ret, "Failed to create UHCI HC function.\n");
177 instance->hc_fun->ops = &hc_ops;
178 instance->hc_fun->driver_data = &instance->hc.generic;
179
180 instance->rh_fun = ddf_fun_create(device, fun_inner, "uhci_rh");
181 ret = (instance->rh_fun == NULL) ? ENOMEM : EOK;
182 CHECK_RET_DEST_FREE_RETURN(ret, "Failed to create UHCI RH function.\n");
183 instance->rh_fun->ops = &rh_ops;
184 instance->rh_fun->driver_data = &instance->rh;
185
186 uintptr_t reg_base = 0;
187 size_t reg_size = 0;
188 int irq = 0;
189
190 ret = pci_get_my_registers(device, &reg_base, &reg_size, &irq);
191 CHECK_RET_DEST_FREE_RETURN(ret,
192 "Failed to get I/O addresses for %" PRIun ": %s.\n",
193 device->handle, str_error(ret));
194 usb_log_debug("I/O regs at 0x%p (size %zu), IRQ %d.\n",
195 (void *) reg_base, reg_size, irq);
196
197 ret = pci_disable_legacy(device);
198 CHECK_RET_DEST_FREE_RETURN(ret,
199 "Failed to disable legacy USB: %s.\n", str_error(ret));
200
201 const size_t cmd_count = hc_irq_cmd_count();
202 irq_cmd_t irq_cmds[cmd_count];
203 ret =
204 hc_get_irq_commands(irq_cmds, sizeof(irq_cmds), reg_base, reg_size);
205 CHECK_RET_DEST_FREE_RETURN(ret,
206 "Failed to generate IRQ commands: %s.\n", str_error(ret));
207
208 irq_code_t irq_code = { .cmdcount = cmd_count, .cmds = irq_cmds };
209
210 /* Register handler to avoid interrupt lockup */
211 ret = register_interrupt_handler(device, irq, irq_handler, &irq_code);
212 CHECK_RET_DEST_FREE_RETURN(ret,
213 "Failed to register interrupt handler: %s.\n", str_error(ret));
214
215 bool interrupts = false;
216 ret = pci_enable_interrupts(device);
217 if (ret != EOK) {
218 usb_log_warning("Failed to enable interrupts: %s."
219 " Falling back to polling.\n", str_error(ret));
220 } else {
221 usb_log_debug("Hw interrupts enabled.\n");
222 interrupts = true;
223 }
224
225 ret = hc_init(&instance->hc, (void*)reg_base, reg_size, interrupts);
226 CHECK_RET_DEST_FREE_RETURN(ret,
227 "Failed to init uhci_hcd: %s.\n", str_error(ret));
228
229 device->driver_data = instance;
230
231#define CHECK_RET_FINI_RETURN(ret, message...) \
232if (ret != EOK) { \
233 hc_fini(&instance->hc); \
234 CHECK_RET_DEST_FREE_RETURN(ret, message); \
235 return ret; \
236} else (void)0
237
238 ret = ddf_fun_bind(instance->hc_fun);
239 CHECK_RET_FINI_RETURN(ret, "Failed to bind UHCI device function: %s.\n",
240 str_error(ret));
241
242 ret = ddf_fun_add_to_category(instance->hc_fun, USB_HC_CATEGORY);
243 CHECK_RET_FINI_RETURN(ret,
244 "Failed to add UHCI to HC class: %s.\n", str_error(ret));
245
246 ret = rh_init(&instance->rh, instance->rh_fun,
247 (uintptr_t)instance->hc.registers + 0x10, 4);
248 CHECK_RET_FINI_RETURN(ret,
249 "Failed to setup UHCI root hub: %s.\n", str_error(ret));
250
251 ret = ddf_fun_bind(instance->rh_fun);
252 CHECK_RET_FINI_RETURN(ret,
253 "Failed to register UHCI root hub: %s.\n", str_error(ret));
254
255 return EOK;
256#undef CHECK_RET_FINI_RETURN
257}
258/**
259 * @}
260 */
Note: See TracBrowser for help on using the repository browser.