source: mainline/uspace/drv/bus/usb/uhci/hc.h@ 33b8d024

lfn serial ticket/834-toolchain-update topic/msim-upgrade topic/simplify-dev-export
Last change on this file since 33b8d024 was b7fd2a0, checked in by Jiří Zárevúcky <zarevucky.jiri@…>, 8 years ago

Use errno_t in all uspace and kernel code.

Change type of every variable, parameter and return value that holds an
<errno.h> constant to either errno_t (the usual case), or sys_errno_t
(some places in kernel). This is for the purpose of self-documentation,
as well as for type-checking with a bit of type definition hackery.

Although this is a massive commit, it is a simple text replacement, and thus
is very easy to verify. Simply do the following:

`
git checkout <this commit's hash>
git reset HEAD
git add .
tools/srepl '\berrno_t\b' int
git add .
tools/srepl '\bsys_errno_t\b' sysarg_t
git reset
git diff
`

While this doesn't ensure that the replacements are correct, it does ensure
that the commit doesn't do anything except those replacements. Since errno_t
is typedef'd to int in the usual case (and sys_errno_t to sysarg_t), even if
incorrect, this commit cannot change behavior.

  • Property mode set to 100644
File size: 4.4 KB
Line 
1/*
2 * Copyright (c) 2011 Jan Vesely
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 *
9 * - Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * - Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * - The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 */
28
29/** @addtogroup drvusbuhcihc
30 * @{
31 */
32/** @file
33 * @brief UHCI host controller driver structure
34 */
35
36#ifndef DRV_UHCI_HC_H
37#define DRV_UHCI_HC_H
38
39#include <device/hw_res_parsed.h>
40#include <fibril.h>
41#include <macros.h>
42#include <stdbool.h>
43#include <ddi.h>
44#include <usb/host/hcd.h>
45#include <usb/host/usb_transfer_batch.h>
46
47#include "uhci_rh.h"
48#include "transfer_list.h"
49#include "hw_struct/link_pointer.h"
50
51/** UHCI I/O registers layout */
52typedef struct uhci_regs {
53 /** Command register, controls HC behaviour */
54 ioport16_t usbcmd;
55#define UHCI_CMD_MAX_PACKET (1 << 7)
56#define UHCI_CMD_CONFIGURE (1 << 6)
57#define UHCI_CMD_DEBUG (1 << 5)
58#define UHCI_CMD_FORCE_GLOBAL_RESUME (1 << 4)
59#define UHCI_CMD_FORCE_GLOBAL_SUSPEND (1 << 3)
60#define UHCI_CMD_GLOBAL_RESET (1 << 2)
61#define UHCI_CMD_HCRESET (1 << 1)
62#define UHCI_CMD_RUN_STOP (1 << 0)
63
64 /** Status register, 1 means interrupt is asserted (if enabled) */
65 ioport16_t usbsts;
66#define UHCI_STATUS_HALTED (1 << 5)
67#define UHCI_STATUS_PROCESS_ERROR (1 << 4)
68#define UHCI_STATUS_SYSTEM_ERROR (1 << 3)
69#define UHCI_STATUS_RESUME (1 << 2)
70#define UHCI_STATUS_ERROR_INTERRUPT (1 << 1)
71#define UHCI_STATUS_INTERRUPT (1 << 0)
72#define UHCI_STATUS_NM_INTERRUPTS \
73 (UHCI_STATUS_PROCESS_ERROR | UHCI_STATUS_SYSTEM_ERROR)
74
75 /** Interrupt enabled registers */
76 ioport16_t usbintr;
77#define UHCI_INTR_SHORT_PACKET (1 << 3)
78#define UHCI_INTR_COMPLETE (1 << 2)
79#define UHCI_INTR_RESUME (1 << 1)
80#define UHCI_INTR_CRC (1 << 0)
81
82 /** Register stores frame number used in SOF packet */
83 ioport16_t frnum;
84
85 /** Pointer(physical) to the Frame List */
86 ioport32_t flbaseadd;
87
88 /** SOF modification to match external timers */
89 ioport8_t sofmod;
90
91 PADD8[3];
92 ioport16_t ports[];
93} uhci_regs_t;
94
95#define UHCI_FRAME_LIST_COUNT 1024
96#define UHCI_DEBUGER_TIMEOUT 5000000
97#define UHCI_ALLOWED_HW_FAIL 5
98
99/** Main UHCI driver structure */
100typedef struct hc {
101 uhci_rh_t rh;
102 /** Addresses of I/O registers */
103 uhci_regs_t *registers;
104
105 /** Frame List contains 1024 link pointers */
106 link_pointer_t *frame_list;
107
108 /** List and queue of interrupt transfers */
109 transfer_list_t transfers_interrupt;
110 /** List and queue of low speed control transfers */
111 transfer_list_t transfers_control_slow;
112 /** List and queue of full speed bulk transfers */
113 transfer_list_t transfers_bulk_full;
114 /** List and queue of full speed control transfers */
115 transfer_list_t transfers_control_full;
116
117 /** Pointer table to the above lists, helps during scheduling */
118 transfer_list_t *transfers[2][4];
119 /** Indicator of hw interrupts availability */
120 bool hw_interrupts;
121
122 /** Number of hw failures detected. */
123 unsigned hw_failures;
124} hc_t;
125
126extern errno_t hc_init(hc_t *, const hw_res_list_parsed_t *, bool);
127extern void hc_fini(hc_t *);
128
129extern errno_t uhci_hc_gen_irq_code(irq_code_t *, const hw_res_list_parsed_t *, int *);
130
131extern void uhci_hc_interrupt(hcd_t *, uint32_t);
132extern errno_t uhci_hc_status(hcd_t *, uint32_t *);
133extern errno_t uhci_hc_schedule(hcd_t *, usb_transfer_batch_t *);
134
135#endif
136
137/**
138 * @}
139 */
Note: See TracBrowser for help on using the repository browser.