source: mainline/uspace/drv/bus/usb/ohci/res.c@ 8011094

lfn serial ticket/834-toolchain-update topic/msim-upgrade topic/simplify-dev-export
Last change on this file since 8011094 was 8011094, checked in by Jan Vesely <jano.vesely@…>, 13 years ago

ohci: Rename and cleanup pci_* functions and files.

They are not pci specific. Cleanup includes.

  • Property mode set to 100644
File size: 3.3 KB
Line 
1/*
2 * Copyright (c) 2011 Jan Vesely
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 *
9 * - Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * - Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * - The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 */
28
29/**
30 * @addtogroup drvusbohci
31 * @{
32 */
33/**
34 * @file
35 * PCI related functions needed by the OHCI driver.
36 */
37
38#include <errno.h>
39#include <assert.h>
40#include <devman.h>
41#include <device/hw_res_parsed.h>
42
43#include <usb/debug.h>
44
45#include "res.h"
46
47/** Get address of registers and IRQ for given device.
48 *
49 * @param[in] dev Device asking for the addresses.
50 * @param[out] mem_reg_address Base address of the memory range.
51 * @param[out] mem_reg_size Size of the memory range.
52 * @param[out] irq_no IRQ assigned to the device.
53 * @return Error code.
54 */
55int get_my_registers(const ddf_dev_t *dev,
56 uintptr_t *mem_reg_address, size_t *mem_reg_size, int *irq_no)
57{
58 assert(dev);
59
60 async_sess_t *parent_sess =
61 devman_parent_device_connect(EXCHANGE_SERIALIZE, dev->handle,
62 IPC_FLAG_BLOCKING);
63 if (!parent_sess)
64 return ENOMEM;
65
66 hw_res_list_parsed_t hw_res;
67 hw_res_list_parsed_init(&hw_res);
68 const int ret = hw_res_get_list_parsed(parent_sess, &hw_res, 0);
69 async_hangup(parent_sess);
70 if (ret != EOK) {
71 return ret;
72 }
73
74 /* We want one irq and one mem range. */
75 if (hw_res.irqs.count != 1 || hw_res.mem_ranges.count != 1) {
76 hw_res_list_parsed_clean(&hw_res);
77 return EINVAL;
78 }
79
80 if (mem_reg_address)
81 *mem_reg_address = hw_res.mem_ranges.ranges[0].address;
82 if (mem_reg_size)
83 *mem_reg_size = hw_res.mem_ranges.ranges[0].size;
84 if (irq_no)
85 *irq_no = hw_res.irqs.irqs[0];
86
87 hw_res_list_parsed_clean(&hw_res);
88 return EOK;
89}
90
91/** Call the PCI driver with a request to enable interrupts
92 *
93 * @param[in] device Device asking for interrupts
94 * @return Error code.
95 */
96int enable_interrupts(const ddf_dev_t *device)
97{
98 async_sess_t *parent_sess =
99 devman_parent_device_connect(EXCHANGE_SERIALIZE, device->handle,
100 IPC_FLAG_BLOCKING);
101 if (!parent_sess)
102 return ENOMEM;
103
104 const bool enabled = hw_res_enable_interrupt(parent_sess);
105 async_hangup(parent_sess);
106
107 return enabled ? EOK : EIO;
108}
109
110/**
111 * @}
112 */
Note: See TracBrowser for help on using the repository browser.