source: mainline/uspace/drv/bus/usb/ohci/pci.c@ 70172dc4

/*
 * Copyright (c) 2011 Jan Vesely
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * - Redistributions of source code must retain the above copyright
 *   notice, this list of conditions and the following disclaimer.
 * - Redistributions in binary form must reproduce the above copyright
 *   notice, this list of conditions and the following disclaimer in the
 *   documentation and/or other materials provided with the distribution.
 * - The name of the author may not be used to endorse or promote products
 *   derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/**
 * @addtogroup drvusbohci
 * @{
 */
/**
 * @file
 * PCI related functions needed by the OHCI driver.
 */

#include <errno.h>
#include <assert.h>
#include <as.h>
#include <devman.h>
#include <ddi.h>
#include <libarch/ddi.h>
#include <device/hw_res_parsed.h>

#include <usb/debug.h>
#include <pci_dev_iface.h>

#include "pci.h"

/** Get address of registers and IRQ for given device.
 *
 * @param[in] dev Device asking for the addresses.
 * @param[out] mem_reg_address Base address of the memory range.
 * @param[out] mem_reg_size Size of the memory range.
 * @param[out] irq_no IRQ assigned to the device.
 * @return Error code.
 */
int pci_get_my_registers(ddf_dev_t *dev,
    uintptr_t *mem_reg_address, size_t *mem_reg_size, int *irq_no)
{
        assert(dev);

        async_sess_t *parent_sess =
            devman_parent_device_connect(EXCHANGE_SERIALIZE, dev->handle,
            IPC_FLAG_BLOCKING);
        if (!parent_sess)
                return ENOMEM;

        hw_res_list_parsed_t hw_res;
        hw_res_list_parsed_init(&hw_res);
        const int ret =  hw_res_get_list_parsed(parent_sess, &hw_res, 0);
        async_hangup(parent_sess);
        if (ret != EOK) {
                return ret;
        }

        /* We want one irq and one mem range. */
        if (hw_res.irqs.count != 1 || hw_res.mem_ranges.count != 1) {
                hw_res_list_parsed_clean(&hw_res);
                return EINVAL;
        }

        if (mem_reg_address)
                *mem_reg_address = hw_res.mem_ranges.ranges[0].address;
        if (mem_reg_size)
                *mem_reg_size = hw_res.mem_ranges.ranges[0].size;
        if (irq_no)
                *irq_no = hw_res.irqs.irqs[0];

        hw_res_list_parsed_clean(&hw_res);
        return EOK;
}

/** Call the PCI driver with a request to enable interrupts
 *
 * @param[in] device Device asking for interrupts
 * @return Error code.
 */
int pci_enable_interrupts(ddf_dev_t *device)
{
        async_sess_t *parent_sess =
            devman_parent_device_connect(EXCHANGE_SERIALIZE, device->handle,
            IPC_FLAG_BLOCKING);
        if (!parent_sess)
                return ENOMEM;
        
        bool enabled = hw_res_enable_interrupt(parent_sess);
        async_hangup(parent_sess);
        
        return enabled ? EOK : EIO;
}

/**
 * @}
 */