/* * Copyright (c) 2013 Jan Vesely * Copyright (c) 2018 Ondrej Hlavaty * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * - Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * - Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * - The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /** @addtogroup drvusbohci * @{ */ /** @file * @brief OHCI driver */ #include #include #include #include #include #include #include #include #include #include #include #include #include "ohci_rh.h" enum { HUB_STATUS_CHANGE_PIPE = 1, }; static usbvirt_device_ops_t ops; /** Initialize internal USB HUB class descriptor. * @param instance OHCI root hub. * Use register based info to create accurate descriptor. */ static void ohci_rh_hub_desc_init(ohci_rh_t *instance) { assert(instance); const unsigned dsize = sizeof(usb_hub_descriptor_header_t) + STATUS_BYTES(instance->port_count) * 2; assert(dsize <= sizeof(instance->hub_descriptor)); const uint32_t hub_desc = OHCI_RD(instance->registers->rh_desc_a); const uint32_t port_desc = OHCI_RD(instance->registers->rh_desc_b); instance->hub_descriptor.header.length = dsize; instance->hub_descriptor.header.descriptor_type = USB_DESCTYPE_HUB; instance->hub_descriptor.header.port_count = instance->port_count; instance->hub_descriptor.header.characteristics = 0 | /* Bits 0,1 indicate power switching mode */ ((hub_desc & RHDA_PSM_FLAG) ? 0x01 : 0) | ((hub_desc & RHDA_NPS_FLAG) ? 0x02 : 0) | /* Bit 2 indicates device type (compound device) */ ((hub_desc & RHDA_DT_FLAG) ? 0x04 : 0) | /* Bits 3,4 indicate over-current protection mode */ ((hub_desc & RHDA_OCPM_FLAG) ? 0x08 : 0) | ((hub_desc & RHDA_NOCP_FLAG) ? 0x10 : 0); instance->hub_descriptor.header.power_good_time = hub_desc >> RHDA_POTPGT_SHIFT; /* bHubContrCurrent, root hubs don't need no power. */ instance->hub_descriptor.header.max_current = 0; /* Device Removable and some legacy 1.0 stuff*/ instance->hub_descriptor.rempow[0] = (port_desc >> RHDB_DR_SHIFT) & 0xff; if (STATUS_BYTES(instance->port_count) == 1) { instance->hub_descriptor.rempow[1] = 0xff; } else { instance->hub_descriptor.rempow[1] = ((port_desc >> RHDB_DR_SHIFT) >> 8) & 0xff; } instance->hub_descriptor.rempow[2] = 0xff; instance->hub_descriptor.rempow[3] = 0xff; } /** Initialize OHCI root hub. * @param instance Place to initialize. * @param regs OHCI device registers. * @param name Device name. * return Error code, EOK on success. * * Selects preconfigured port powering mode, sets up descriptor, and * initializes internal virtual hub. */ errno_t ohci_rh_init(ohci_rh_t *instance, ohci_regs_t *regs, fibril_mutex_t *guard, const char *name) { assert(instance); instance->registers = regs; instance->port_count = OHCI_RD(regs->rh_desc_a) & RHDA_NDS_MASK; usb_log_debug2("rh_desc_a: %x.", OHCI_RD(regs->rh_desc_a)); if (instance->port_count > OHCI_MAX_PORTS) { usb_log_warning("OHCI specification does not allow %d ports. " "Max %d ports will be used.", instance->port_count, OHCI_MAX_PORTS); instance->port_count = OHCI_MAX_PORTS; } usb_log_info("%s: Found %u ports.", name, instance->port_count); #if defined OHCI_POWER_SWITCH_no usb_log_info("%s: Set power mode to no power switching.", name); /* Set port power mode to no power-switching. (always on) */ OHCI_SET(regs->rh_desc_a, RHDA_NPS_FLAG); /* Set to no over-current reporting */ OHCI_SET(regs->rh_desc_a, RHDA_NOCP_FLAG); #elif defined OHCI_POWER_SWITCH_ganged usb_log_info("%s: Set power mode to ganged power switching.", name); /* Set port power mode to ganged power-switching. */ OHCI_CLR(regs->rh_desc_a, RHDA_NPS_FLAG); OHCI_CLR(regs->rh_desc_a, RHDA_PSM_FLAG); /* Turn off power (hub driver will turn this back on)*/ OHCI_WR(regs->rh_status, RHS_CLEAR_GLOBAL_POWER); /* Set to global over-current */ OHCI_CLR(regs->rh_desc_a, RHDA_NOCP_FLAG); OHCI_CLR(regs->rh_desc_a, RHDA_OCPM_FLAG); #else usb_log_info("%s: Set power mode to per-port power switching.", name); /* Set port power mode to per port power-switching. */ OHCI_CLR(regs->rh_desc_a, RHDA_NPS_FLAG); OHCI_SET(regs->rh_desc_a, RHDA_PSM_FLAG); /* Control all ports by global switch and turn them off */ OHCI_CLR(regs->rh_desc_b, RHDB_PCC_MASK << RHDB_PCC_SHIFT); OHCI_WR(regs->rh_status, RHS_CLEAR_GLOBAL_POWER); /* Return control to per port state */ OHCI_SET(regs->rh_desc_b, RHDB_PCC_MASK << RHDB_PCC_SHIFT); /* Set per port over-current */ OHCI_CLR(regs->rh_desc_a, RHDA_NOCP_FLAG); OHCI_SET(regs->rh_desc_a, RHDA_OCPM_FLAG); #endif ohci_rh_hub_desc_init(instance); instance->status_change_endpoint = NULL; instance->guard = guard; return virthub_base_init(&instance->base, name, &ops, instance, NULL, &instance->hub_descriptor.header, HUB_STATUS_CHANGE_PIPE); } /** Schedule USB request. * @param instance OCHI root hub instance. * @param batch USB requst batch to schedule. * @return Always EOK. * Most requests complete even before this function returns, * status change requests might be postponed until there is something to report. */ errno_t ohci_rh_schedule(ohci_rh_t *instance, usb_transfer_batch_t *batch) { assert(instance); assert(batch); batch->error = virthub_base_request(&instance->base, batch->target, batch->dir, &batch->setup.packet, batch->dma_buffer.virt, batch->size, &batch->transferred_size); if (batch->error == ENAK) { /* Lock the HC guard */ fibril_mutex_lock(instance->guard); const int err = endpoint_activate_locked(batch->ep, batch); if (err) { fibril_mutex_unlock(batch->ep->guard); return err; } /* * Asserting that the HC do not run two instances of the status * change endpoint - shall be true. */ assert(!instance->status_change_endpoint); endpoint_add_ref(batch->ep); instance->status_change_endpoint = batch->ep; fibril_mutex_unlock(instance->guard); } else { usb_transfer_batch_finish(batch); } return EOK; } /** Handle OHCI RHSC interrupt. * @param instance OHCI root hub isntance. * @return Always EOK. * * Interrupt means there is a change of status to report. It may trigger * processing of a postponed request. */ errno_t ohci_rh_interrupt(ohci_rh_t *instance) { fibril_mutex_lock(instance->guard); endpoint_t *ep = instance->status_change_endpoint; if (!ep) { fibril_mutex_unlock(instance->guard); return EOK; } usb_transfer_batch_t *const batch = ep->active_batch; endpoint_deactivate_locked(ep); instance->status_change_endpoint = NULL; fibril_mutex_unlock(instance->guard); endpoint_del_ref(ep); if (batch) { batch->error = virthub_base_request(&instance->base, batch->target, batch->dir, &batch->setup.packet, batch->dma_buffer.virt, batch->size, &batch->transferred_size); usb_transfer_batch_finish(batch); } return EOK; } /* HUB ROUTINES IMPLEMENTATION */ #define TEST_SIZE_INIT(size, port, hub) \ do { \ hub = virthub_get_data(device); \ assert(hub);\ if (uint16_usb2host(setup_packet->length) != size) \ return ESTALL; \ port = uint16_usb2host(setup_packet->index) - 1; \ if (port > hub->port_count) \ return EINVAL; \ } while (0) /** Hub status request handler. * @param device Virtual hub device * @param setup_packet USB setup stage data. * @param[out] data destination data buffer, size must be at least * setup_packet->length bytes * @param[out] act_size Sized of the valid response part of the buffer. * @return Error code. */ static errno_t req_get_status(usbvirt_device_t *device, const usb_device_request_setup_packet_t *setup_packet, uint8_t *data, size_t *act_size) { ohci_rh_t *hub = virthub_get_data(device); assert(hub); if (uint16_usb2host(setup_packet->length) != 4) return ESTALL; const uint32_t val = OHCI_RD(hub->registers->rh_status) & (RHS_LPS_FLAG | RHS_LPSC_FLAG | RHS_OCI_FLAG | RHS_OCIC_FLAG); memcpy(data, &val, sizeof(val)); *act_size = sizeof(val); return EOK; } /** Hub set feature request handler. * @param device Virtual hub device * @param setup_packet USB setup stage data. * @param[out] data destination data buffer, size must be at least * setup_packet->length bytes * @param[out] act_size Sized of the valid response part of the buffer. * @return Error code. */ static errno_t req_clear_hub_feature(usbvirt_device_t *device, const usb_device_request_setup_packet_t *setup_packet, uint8_t *data, size_t *act_size) { ohci_rh_t *hub = virthub_get_data(device); assert(hub); /* * Chapter 11.16.2 specifies that only C_HUB_LOCAL_POWER and * C_HUB_OVER_CURRENT are supported. * C_HUB_LOCAL_POWER is not supported * because root hubs do not support local power status feature. * C_HUB_OVER_CURRENT is represented by OHCI RHS_OCIC_FLAG. * (OHCI pg. 127) */ const unsigned feature = uint16_usb2host(setup_packet->value); if (feature == USB_HUB_FEATURE_C_HUB_OVER_CURRENT) { OHCI_WR(hub->registers->rh_status, RHS_OCIC_FLAG); } return EOK; } /** Port status request handler. * @param device Virtual hub device * @param setup_packet USB setup stage data. * @param[out] data destination data buffer, size must be at least * setup_packet->length bytes * @param[out] act_size Sized of the valid response part of the buffer. * @return Error code. */ static errno_t req_get_port_status(usbvirt_device_t *device, const usb_device_request_setup_packet_t *setup_packet, uint8_t *data, size_t *act_size) { ohci_rh_t *hub; unsigned port; TEST_SIZE_INIT(4, port, hub); if (setup_packet->value != 0) return EINVAL; const uint32_t status = OHCI_RD(hub->registers->rh_port_status[port]); memcpy(data, &status, sizeof(status)); *act_size = sizeof(status); return EOK; } /** Port clear feature request handler. * @param device Virtual hub device * @param setup_packet USB setup stage data. * @param[out] data destination data buffer, size must be at least * setup_packet->length bytes * @param[out] act_size Sized of the valid response part of the buffer. * @return Error code. */ static errno_t req_clear_port_feature(usbvirt_device_t *device, const usb_device_request_setup_packet_t *setup_packet, uint8_t *data, size_t *act_size) { ohci_rh_t *hub; unsigned port; uint32_t rhda; TEST_SIZE_INIT(0, port, hub); const unsigned feature = uint16_usb2host(setup_packet->value); /* Enabled features to clear: see page 269 of USB specs */ switch (feature) { case USB_HUB_FEATURE_PORT_POWER: /*8*/ rhda = OHCI_RD(hub->registers->rh_desc_a); /* No power switching */ if (rhda & RHDA_NPS_FLAG) return ENOTSUP; /* Ganged power switching, one port powers all */ if (!(rhda & RHDA_PSM_FLAG)) { OHCI_WR(hub->registers->rh_status, RHS_CLEAR_GLOBAL_POWER); return EOK; } OHCI_WR(hub->registers->rh_port_status[port], RHPS_CLEAR_PORT_POWER); return EOK; case USB2_HUB_FEATURE_PORT_ENABLE: /*1*/ OHCI_WR(hub->registers->rh_port_status[port], RHPS_CLEAR_PORT_ENABLE); return EOK; case USB2_HUB_FEATURE_PORT_SUSPEND: /*2*/ OHCI_WR(hub->registers->rh_port_status[port], RHPS_CLEAR_PORT_SUSPEND); return EOK; case USB_HUB_FEATURE_C_PORT_CONNECTION: /*16*/ case USB2_HUB_FEATURE_C_PORT_ENABLE: /*17*/ case USB2_HUB_FEATURE_C_PORT_SUSPEND: /*18*/ case USB_HUB_FEATURE_C_PORT_OVER_CURRENT: /*19*/ case USB_HUB_FEATURE_C_PORT_RESET: /*20*/ usb_log_debug2("Clearing port C_CONNECTION, C_ENABLE, " "C_SUSPEND, C_OC or C_RESET on port %u.", port); /* Bit offsets correspond to the feature number */ OHCI_WR(hub->registers->rh_port_status[port], 1 << feature); return EOK; default: return ENOTSUP; } } /** Port set feature request handler. * @param device Virtual hub device * @param setup_packet USB setup stage data. * @param[out] data destination data buffer, size must be at least * setup_packet->length bytes * @param[out] act_size Sized of the valid response part of the buffer. * @return Error code. */ static errno_t req_set_port_feature(usbvirt_device_t *device, const usb_device_request_setup_packet_t *setup_packet, uint8_t *data, size_t *act_size) { ohci_rh_t *hub; unsigned port; uint32_t rhda; TEST_SIZE_INIT(0, port, hub); const unsigned feature = uint16_usb2host(setup_packet->value); switch (feature) { case USB_HUB_FEATURE_PORT_POWER: /*8*/ rhda = OHCI_RD(hub->registers->rh_desc_a); /* No power switching */ if (rhda & RHDA_NPS_FLAG) return EOK; /* Ganged power switching, one port powers all */ if (!(rhda & RHDA_PSM_FLAG)) { OHCI_WR(hub->registers->rh_status, RHS_SET_GLOBAL_POWER); return EOK; } /* Fall through, for per port power */ /* Fallthrough */ case USB2_HUB_FEATURE_PORT_ENABLE: /*1*/ case USB2_HUB_FEATURE_PORT_SUSPEND: /*2*/ case USB_HUB_FEATURE_PORT_RESET: /*4*/ usb_log_debug2("Setting port POWER, ENABLE, SUSPEND or RESET " "on port %u.", port); /* Bit offsets correspond to the feature number */ OHCI_WR(hub->registers->rh_port_status[port], 1 << feature); return EOK; default: return ENOTSUP; } } /** Status change handler. * @param device Virtual hub device * @param endpoint Endpoint number * @param tr_type Transfer type * @param buffer Response destination * @param buffer_size Bytes available in buffer * @param actual_size Size us the used part of the dest buffer. * * Produces status mask. Bit 0 indicates hub status change the other bits * represent port status change. Endian does not matter as UHCI root hubs * only need 1 byte. */ static errno_t req_status_change_handler(usbvirt_device_t *device, usb_endpoint_t endpoint, usb_transfer_type_t tr_type, void *buffer, size_t buffer_size, size_t *actual_size) { ohci_rh_t *hub = virthub_get_data(device); assert(hub); if (buffer_size < STATUS_BYTES(hub->port_count)) return ESTALL; uint16_t mask = 0; /* Only local power source change and over-current change can happen */ if (OHCI_RD(hub->registers->rh_status) & (RHS_LPSC_FLAG | RHS_OCIC_FLAG)) { mask |= 1; } for (unsigned port = 1; port <= hub->port_count; ++port) { /* Write-clean bits are those that indicate change */ if (OHCI_RD(hub->registers->rh_port_status[port - 1]) & RHPS_CHANGE_WC_MASK) { mask |= (1 << port); } } usb_log_debug2("OHCI root hub interrupt mask: %hx.", mask); if (mask == 0) return ENAK; mask = uint16_host2usb(mask); memcpy(buffer, &mask, STATUS_BYTES(hub->port_count)); *actual_size = STATUS_BYTES(hub->port_count); return EOK; } /** OHCI root hub request handlers */ static const usbvirt_control_request_handler_t control_transfer_handlers[] = { { STD_REQ_IN(USB_REQUEST_RECIPIENT_DEVICE, USB_DEVREQ_GET_DESCRIPTOR), .name = "GetDescriptor", .callback = virthub_base_get_hub_descriptor, }, { CLASS_REQ_IN(USB_REQUEST_RECIPIENT_DEVICE, USB_DEVREQ_GET_DESCRIPTOR), .name = "GetDescriptor", .callback = virthub_base_get_hub_descriptor, }, { CLASS_REQ_IN(USB_REQUEST_RECIPIENT_DEVICE, USB_HUB_REQUEST_GET_DESCRIPTOR), .name = "GetHubDescriptor", .callback = virthub_base_get_hub_descriptor, }, { CLASS_REQ_IN(USB_REQUEST_RECIPIENT_OTHER, USB_HUB_REQUEST_GET_STATUS), .name = "GetPortStatus", .callback = req_get_port_status, }, { CLASS_REQ_OUT(USB_REQUEST_RECIPIENT_DEVICE, USB_HUB_REQUEST_CLEAR_FEATURE), .name = "ClearHubFeature", .callback = req_clear_hub_feature, }, { CLASS_REQ_OUT(USB_REQUEST_RECIPIENT_OTHER, USB_HUB_REQUEST_CLEAR_FEATURE), .name = "ClearPortFeature", .callback = req_clear_port_feature, }, { CLASS_REQ_IN(USB_REQUEST_RECIPIENT_DEVICE, USB_HUB_REQUEST_GET_STATUS), .name = "GetHubStatus", .callback = req_get_status, }, { CLASS_REQ_IN(USB_REQUEST_RECIPIENT_OTHER, USB_HUB_REQUEST_GET_STATUS), .name = "GetPortStatus", .callback = req_get_port_status, }, { CLASS_REQ_OUT(USB_REQUEST_RECIPIENT_DEVICE, USB_HUB_REQUEST_SET_FEATURE), .name = "SetHubFeature", .callback = req_nop, }, { CLASS_REQ_OUT(USB_REQUEST_RECIPIENT_OTHER, USB_HUB_REQUEST_SET_FEATURE), .name = "SetPortFeature", .callback = req_set_port_feature, }, { .callback = NULL } }; /** Virtual OHCI root hub ops */ static usbvirt_device_ops_t ops = { .control = control_transfer_handlers, .data_in[HUB_STATUS_CHANGE_PIPE] = req_status_change_handler, };