source: mainline/uspace/drv/bus/usb/ohci/ohci_regs.h@ 18b6a88

lfn serial ticket/834-toolchain-update topic/msim-upgrade topic/simplify-dev-export
Last change on this file since 18b6a88 was 7ee7e6a, checked in by Jakub Jermar <jakub@…>, 8 years ago

Further reduce the number of inclusions of sys/types.h

  • Property mode set to 100644
File size: 9.1 KB
Line 
1/*
2 * Copyright (c) 2011 Jan Vesely
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 *
9 * - Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * - Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * - The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 */
28
29/** @addtogroup drvusbohci
30 * @{
31 */
32/** @file
33 * @brief OHCI host controller register structure
34 */
35
36#ifndef DRV_OHCI_OHCI_REGS_H
37#define DRV_OHCI_OHCI_REGS_H
38
39#include <ddi.h>
40#include <byteorder.h>
41
42#define OHCI_WR(reg, val) pio_write_32(&(reg), host2uint32_t_le(val))
43#define OHCI_RD(reg) uint32_t_le2host(pio_read_32(&(reg)))
44#define OHCI_SET(reg, val) pio_set_32(&(reg), host2uint32_t_le(val), 1)
45#define OHCI_CLR(reg, val) pio_clear_32(&(reg), host2uint32_t_le(val), 1)
46
47#define LEGACY_REGS_OFFSET 0x100
48
49/** OHCI memory mapped registers structure */
50typedef struct ohci_regs {
51 const ioport32_t revision;
52#define R_REVISION_MASK (0x3f)
53#define R_LEGACY_FLAG (0x80)
54
55 ioport32_t control;
56/* Control-bulk service ratio */
57#define C_CBSR_1_1 (0x0)
58#define C_CBSR_1_2 (0x1)
59#define C_CBSR_1_3 (0x2)
60#define C_CBSR_1_4 (0x3)
61#define C_CBSR_MASK (0x3)
62#define C_CBSR_SHIFT 0
63
64#define C_PLE (1 << 2) /* Periodic list enable */
65#define C_IE (1 << 3) /* Isochronous enable */
66#define C_CLE (1 << 4) /* Control list enable */
67#define C_BLE (1 << 5) /* Bulk list enable */
68
69/* Host controller functional state */
70#define C_HCFS_RESET (0x0)
71#define C_HCFS_RESUME (0x1)
72#define C_HCFS_OPERATIONAL (0x2)
73#define C_HCFS_SUSPEND (0x3)
74#define C_HCFS_GET(reg) ((OHCI_RD(reg) >> 6) & 0x3)
75#define C_HCFS_SET(reg, value) \
76do { \
77 uint32_t r = OHCI_RD(reg); \
78 r &= ~(0x3 << 6); \
79 r |= (value & 0x3) << 6; \
80 OHCI_WR(reg, r); \
81} while (0)
82
83#define C_IR (1 << 8) /* Interrupt routing, make sure it's 0 */
84#define C_RWC (1 << 9) /* Remote wakeup connected, host specific */
85#define C_RWE (1 << 10) /* Remote wakeup enable */
86
87 ioport32_t command_status;
88#define CS_HCR (1 << 0) /* Host controller reset */
89#define CS_CLF (1 << 1) /* Control list filled */
90#define CS_BLF (1 << 2) /* Bulk list filled */
91#define CS_OCR (1 << 3) /* Ownership change request */
92#if 0
93#define CS_SOC_MASK (0x3) /* Scheduling overrun count */
94#define CS_SOC_SHIFT (16)
95#endif
96
97 /** Interupt enable/disable/status,
98 * reads give the same value,
99 * writing causes enable/disable,
100 * status is write-clean (writing 1 clears the bit*/
101 ioport32_t interrupt_status;
102 ioport32_t interrupt_enable;
103 ioport32_t interrupt_disable;
104#define I_SO (1 << 0) /* Scheduling overrun */
105#define I_WDH (1 << 1) /* Done head write-back */
106#define I_SF (1 << 2) /* Start of frame */
107#define I_RD (1 << 3) /* Resume detect */
108#define I_UE (1 << 4) /* Unrecoverable error */
109#define I_FNO (1 << 5) /* Frame number overflow */
110#define I_RHSC (1 << 6) /* Root hub status change */
111#define I_OC (1 << 30) /* Ownership change */
112#define I_MI (1 << 31) /* Master interrupt (any/all) */
113
114 /** HCCA pointer (see hw_struct hcca.h) */
115 ioport32_t hcca;
116#define HCCA_PTR_MASK 0xffffff00 /* HCCA is 256B aligned */
117
118 /** Currently executed periodic endpoint */
119 const ioport32_t periodic_current;
120
121 /** The first control endpoint */
122 ioport32_t control_head;
123
124 /** Currently executed control endpoint */
125 ioport32_t control_current;
126
127 /** The first bulk endpoint */
128 ioport32_t bulk_head;
129
130 /** Currently executed bulk endpoint */
131 ioport32_t bulk_current;
132
133 /** Done TD list, this value is periodically written to HCCA */
134 const ioport32_t done_head;
135
136 /** Frame time and max packet size for all transfers */
137 ioport32_t fm_interval;
138#define FMI_FI_MASK (0x3fff) /* Frame interval in bit times (should be 11999)*/
139#define FMI_FI_SHIFT (0)
140#define FMI_FSMPS_MASK (0x7fff) /* Full speed max packet size */
141#define FMI_FSMPS_SHIFT (16)
142#define FMI_TOGGLE_FLAG (1 << 31)
143
144 /** Bit times remaining in current frame */
145 const ioport32_t fm_remaining;
146#define FMR_FR_MASK FMI_FI_MASK
147#define FMR_FR_SHIFT FMI_FI_SHIFT
148#define FMR_TOGGLE_FLAG FMI_TOGGLE_FLAG
149
150 /** Frame number */
151 const ioport32_t fm_number;
152#define FMN_NUMBER_MASK (0xffff)
153
154 /** Remaining bit time in frame to start periodic transfers */
155 ioport32_t periodic_start;
156#define PS_MASK 0x3fff
157#define PS_SHIFT 0
158
159 /** Threshold for starting LS transaction */
160 ioport32_t ls_threshold;
161#define LST_LST_MASK (0x7fff)
162
163 /** The first root hub control register */
164 ioport32_t rh_desc_a;
165/** Number of downstream ports, max 15 */
166#define RHDA_NDS_MASK (0xff)
167/** Power switching mode: 0-global, 1-per port*/
168#define RHDA_PSM_FLAG (1 << 8)
169/** No power switch: 1-power on, 0-use PSM*/
170#define RHDA_NPS_FLAG (1 << 9)
171/** 1-Compound device, must be 0 */
172#define RHDA_DT_FLAG (1 << 10)
173/** Over-current mode: 0-global, 1-per port */
174#define RHDA_OCPM_FLAG (1 << 11)
175/** OC control: 0-use OCPM, 1-OC off */
176#define RHDA_NOCP_FLAG (1 << 12)
177/** Power on to power good time */
178#define RHDA_POTPGT_SHIFT 24
179
180 /** The other root hub control register */
181 ioport32_t rh_desc_b;
182/** Device removable mask */
183#define RHDB_DR_SHIFT 0
184#define RHDB_DR_MASK 0xffffU
185/** Power control mask */
186#define RHDB_PCC_MASK 0xffffU
187#define RHDB_PCC_SHIFT 16
188
189 /** Root hub status register */
190 ioport32_t rh_status;
191/* read: 0,
192 * write: 0-no effect,
193 * 1-turn off port power for ports
194 * specified in PPCM(RHDB), or all ports,
195 * if power is set globally */
196#define RHS_LPS_FLAG (1 << 0)
197#define RHS_CLEAR_GLOBAL_POWER RHS_LPS_FLAG /* synonym for the above */
198/** Over-current indicator, if per-port: 0 */
199#define RHS_OCI_FLAG (1 << 1)
200
201/* read: 0-connect status change does not wake HC
202 * 1-connect status change wakes HC
203 * write: 1-set DRWE, 0-no effect */
204#define RHS_DRWE_FLAG (1 << 15)
205#define RHS_SET_DRWE RHS_DRWE_FLAG
206/* read: 0,
207 * write: 0-no effect
208 * 1-turn on port power for ports
209 * specified in PPCM(RHDB), or all ports,
210 * if power is set globally */
211#define RHS_LPSC_FLAG (1 << 16)
212#define RHS_SET_GLOBAL_POWER RHS_LPSC_FLAG /* synonym for the above */
213/** Over-current change indicator*/
214#define RHS_OCIC_FLAG (1 << 17)
215#define RHS_CLEAR_DRWE (1 << 31)
216
217 /** Root hub per port status */
218 ioport32_t rh_port_status[];
219#define RHPS_CCS_FLAG (1 << 0) /* r: current connect status,
220 * w: 1-clear port enable, 0-N/S*/
221#define RHPS_CLEAR_PORT_ENABLE RHPS_CCS_FLAG
222#define RHPS_PES_FLAG (1 << 1) /* r: port enable status
223 * w: 1-set port enable, 0-N/S */
224#define RHPS_SET_PORT_ENABLE RHPS_PES_FLAG
225#define RHPS_PSS_FLAG (1 << 2) /* r: port suspend status
226 * w: 1-set port suspend, 0-N/S */
227#define RHPS_SET_PORT_SUSPEND RHPS_PSS_FLAG
228#define RHPS_POCI_FLAG (1 << 3) /* r: port over-current
229 * (if reports are per-port
230 * w: 1-clear port suspend
231 * (start resume if suspened)
232 * 0-nothing */
233#define RHPS_CLEAR_PORT_SUSPEND RHPS_POCI_FLAG
234#define RHPS_PRS_FLAG (1 << 4) /* r: port reset status
235 * w: 1-set port reset, 0-N/S */
236#define RHPS_SET_PORT_RESET RHPS_PRS_FLAG
237#define RHPS_PPS_FLAG (1 << 8) /* r: port power status
238 * w: 1-set port power, 0-N/S */
239#define RHPS_SET_PORT_POWER RHPS_PPS_FLAG
240#define RHPS_LSDA_FLAG (1 << 9) /* r: low speed device attached
241 * w: 1-clear port power, 0-N/S*/
242#define RHPS_CLEAR_PORT_POWER RHPS_LSDA_FLAG
243#define RHPS_CSC_FLAG (1 << 16) /* connect status change WC */
244#define RHPS_PESC_FLAG (1 << 17) /* port enable status change WC */
245#define RHPS_PSSC_FLAG (1 << 18) /* port suspend status change WC */
246#define RHPS_OCIC_FLAG (1 << 19) /* port over-current change WC */
247#define RHPS_PRSC_FLAG (1 << 20) /* port reset status change WC */
248#define RHPS_CHANGE_WC_MASK (0x1f0000)
249} ohci_regs_t;
250
251#endif
252
253/**
254 * @}
255 */
Note: See TracBrowser for help on using the repository browser.