| [b956810] | 1 | /*
|
|---|
| 2 | * Copyright (c) 2011 Jan Vesely
|
|---|
| 3 | * All rights reserved.
|
|---|
| 4 | *
|
|---|
| 5 | * Redistribution and use in source and binary forms, with or without
|
|---|
| 6 | * modification, are permitted provided that the following conditions
|
|---|
| 7 | * are met:
|
|---|
| 8 | *
|
|---|
| 9 | * - Redistributions of source code must retain the above copyright
|
|---|
| 10 | * notice, this list of conditions and the following disclaimer.
|
|---|
| 11 | * - Redistributions in binary form must reproduce the above copyright
|
|---|
| 12 | * notice, this list of conditions and the following disclaimer in the
|
|---|
| 13 | * documentation and/or other materials provided with the distribution.
|
|---|
| 14 | * - The name of the author may not be used to endorse or promote products
|
|---|
| 15 | * derived from this software without specific prior written permission.
|
|---|
| 16 | *
|
|---|
| 17 | * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|---|
| 18 | * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|---|
| 19 | * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|---|
| 20 | * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|---|
| 21 | * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|---|
| 22 | * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|---|
| 23 | * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|---|
| 24 | * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|---|
| 25 | * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|---|
| 26 | * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|---|
| 27 | */
|
|---|
| 28 |
|
|---|
| 29 | /** @addtogroup drvaudiosb16
|
|---|
| 30 | * @{
|
|---|
| 31 | */
|
|---|
| 32 | /** @file
|
|---|
| 33 | * @brief SB16 DSP Command constants
|
|---|
| 34 | */
|
|---|
| 35 | #ifndef DRV_AUDIO_SB16_DSP_COMMANDS_H
|
|---|
| 36 | #define DRV_AUDIO_SB16_DSP_COMMANDS_H
|
|---|
| 37 |
|
|---|
| [763444e] | 38 | /** See Sound Blaster Series HW programming Guide Chapter 6. */
|
|---|
| [b956810] | 39 | typedef enum dsp_command {
|
|---|
| [904b1bc] | 40 | /*
|
|---|
| 41 | * Followed by unsigned byte of digital data,
|
|---|
| 42 | * software controls sampling rate
|
|---|
| 43 | */
|
|---|
| 44 | DIRECT_8B_OUTPUT = 0x10,
|
|---|
| 45 | /* Same as DIRECT_8B_OUTPUT but for input */
|
|---|
| 46 | DIRECT_8B_INPUT = 0x20,
|
|---|
| 47 |
|
|---|
| 48 | /*
|
|---|
| 49 | * Followed by time constant.
|
|---|
| 50 | * TC = 65536 - (256 000 000 /
|
|---|
| 51 | * (channels * sampling rate))
|
|---|
| 52 | * Send only high byte
|
|---|
| 53 | */
|
|---|
| 54 | TRANSFER_TIME_CONSTANT = 0x40,
|
|---|
| 55 |
|
|---|
| 56 | /*
|
|---|
| 57 | * Followed by length.high and length.low
|
|---|
| 58 | * starts single-cycle DMA, length is -1
|
|---|
| 59 | */
|
|---|
| 60 | SINGLE_DMA_8B_OUTPUT = 0x14,
|
|---|
| 61 | /*
|
|---|
| 62 | * Same as SINGLE_DMA_8B_OUTPUT, but for
|
|---|
| 63 | * input
|
|---|
| 64 | */
|
|---|
| 65 | SINGLE_DMA_8B_INPUT = 0x24,
|
|---|
| 66 | /*
|
|---|
| 67 | * Starts single-cycle DMA using
|
|---|
| 68 | * Creative ADPSM 8->2 bit compressed
|
|---|
| 69 | * data, Followed by length.low
|
|---|
| 70 | * and length.high. Length is -1
|
|---|
| 71 | */
|
|---|
| 72 | SINGLE_DMA_8B_ADPCM_2B_OUT = 0x16,
|
|---|
| 73 | /*
|
|---|
| 74 | * Starts single-cycle DMA using
|
|---|
| 75 | * DPSM 8->2 bit compressed data
|
|---|
| 76 | * with reference byte.
|
|---|
| 77 | * Followed by length.low and
|
|---|
| 78 | * length.high. Length is -1
|
|---|
| 79 | */
|
|---|
| 80 | SINGLE_DMA_8B_ADPCM_2B_OUT_REF = 0x17,
|
|---|
| 81 | /*
|
|---|
| 82 | * Same as
|
|---|
| 83 | * SINGLE_DMA_8B_ADPCM_2B_OUT
|
|---|
| 84 | */
|
|---|
| 85 | SINGLE_DMA_8B_ADPCM_4B_OUT = 0x74,
|
|---|
| 86 | /*
|
|---|
| 87 | * Same as
|
|---|
| 88 | * SINGLE_DMA_8B_ADPCM_2B_OUT_REF
|
|---|
| 89 | */
|
|---|
| 90 | SINGLE_DMA_8B_ADPCM_4B_OUT_REF = 0x75,
|
|---|
| 91 | /*
|
|---|
| 92 | * Same as
|
|---|
| 93 | * SINGLE_DMA_8B_ADPCM_2B_OUT
|
|---|
| 94 | */
|
|---|
| 95 | SINGLE_DMA_8B_ADPCM_3B_OUT = 0x76,
|
|---|
| 96 | /*
|
|---|
| 97 | * Same as
|
|---|
| 98 | * SINGLE_DMA_8B_ADPCM_2B_OUT_REF
|
|---|
| 99 | */
|
|---|
| 100 | SINGLE_DMA_8B_ADPCM_3B_OUT_REF = 0x77,
|
|---|
| 101 | /*
|
|---|
| 102 | * Stop sending DMA request,
|
|---|
| 103 | * works for SINGLE and AUTO
|
|---|
| 104 | */
|
|---|
| 105 | DMA_8B_PAUSE = 0xd0,
|
|---|
| 106 | /* Resume transfers paused by DMA_8B_PAUSE */
|
|---|
| 107 | DMA_8B_CONTINUE = 0xd4,
|
|---|
| 108 |
|
|---|
| 109 | /*
|
|---|
| 110 | * Connect speaker via internal amplifier,
|
|---|
| 111 | * has no effect on 4.xx
|
|---|
| 112 | */
|
|---|
| 113 | SPEAKER_ON = 0xd1,
|
|---|
| 114 | /*
|
|---|
| 115 | * Disconnect output from the amplifier,
|
|---|
| 116 | * has no effect on 4.xx
|
|---|
| 117 | */
|
|---|
| 118 | SPEAKER_OFF = 0xd3,
|
|---|
| 119 |
|
|---|
| 120 | /* Read DSP for MIDI data */
|
|---|
| 121 | MIDI_POLLING = 0x30,
|
|---|
| 122 | /*
|
|---|
| 123 | * Start interrupt mode, interrupt will be
|
|---|
| 124 | * generated when there is in-bound data.
|
|---|
| 125 | * To exit send again
|
|---|
| 126 | */
|
|---|
| 127 | MIDI_INTERRUPT = 0x31,
|
|---|
| 128 | /* Followed by midi_data */
|
|---|
| 129 | MIDI_OUTPUT = 0x38,
|
|---|
| 130 |
|
|---|
| 131 | /*
|
|---|
| 132 | * Followed by duration.low, duration.high. Duration is -1
|
|---|
| 133 | * In the units of sampling period. Generates interrupt
|
|---|
| 134 | * at the end of period
|
|---|
| 135 | */
|
|---|
| 136 | PAUSE = 0x80,
|
|---|
| 137 | /* Read 2 bytes, major and minor number */
|
|---|
| 138 | DSP_VERSION = 0xe1,
|
|---|
| 139 |
|
|---|
| 140 | /*
|
|---|
| 141 | * Starts auto-init DMA mode using 8-bit
|
|---|
| 142 | * Interrupt after every block.
|
|---|
| 143 | * To terminate, switch to single or use
|
|---|
| 144 | * EXIT command
|
|---|
| 145 | */
|
|---|
| 146 | AUTO_DMA_8B_OUTPUT = 0x1c,
|
|---|
| 147 | /* Same as AUTO_DMA_8B_OUTPUT, but for input */
|
|---|
| 148 | AUTO_DMA_8B_INPUT = 0x2c,
|
|---|
| 149 | /*
|
|---|
| 150 | * Same as AUTO_DMA_8B_OUTPUT, but use
|
|---|
| 151 | * 8->2bit ADPCM audio format
|
|---|
| 152 | */
|
|---|
| 153 | AUTO_DMA_8B_ADPCM_2B_REF = 0x1f,
|
|---|
| 154 | /* Same as AUTO_DMA_8B_ADPCM_2B_REF */
|
|---|
| 155 | AUTO_DMA_8B_ADPCM_4B_REF = 0x7d,
|
|---|
| 156 | /* Same as AUTO_DMA_8B_ADPCM_2B_REF */
|
|---|
| 157 | AUTO_DMA_8B_ADPCM_3B_REF = 0x7f,
|
|---|
| 158 |
|
|---|
| 159 | /* Ends DMA transfer and terminates I/O process */
|
|---|
| 160 | DMA_8B_EXIT = 0xda,
|
|---|
| 161 |
|
|---|
| 162 | /*
|
|---|
| 163 | * Followed by size.low, size.high
|
|---|
| 164 | * Used with HIGH_SPEED AUTO_DMA
|
|---|
| 165 | */
|
|---|
| 166 | BLOCK_TRANSFER_SIZE = 0x48,
|
|---|
| 167 | /*
|
|---|
| 168 | * Start UART MIDI polling mode, read and
|
|---|
| 169 | * write from/to DSP is interpreted as
|
|---|
| 170 | * read/write from/to MIDI.
|
|---|
| 171 | * To exit use reset signal. Note that reset
|
|---|
| 172 | * will restore previous state and won't do
|
|---|
| 173 | * complete reset
|
|---|
| 174 | */
|
|---|
| 175 | UART_MIDI_POLLING = 0x34,
|
|---|
| 176 | /*
|
|---|
| 177 | * Same as UART_MIDI_POLLING, but use
|
|---|
| 178 | * interrupts instead of polling.
|
|---|
| 179 | */
|
|---|
| 180 | UART_MIDI_INTERRUPT = 0x35,
|
|---|
| 181 | /*
|
|---|
| 182 | * Add time stamp to inbound data, the
|
|---|
| 183 | * order is time.low time.mid time.high
|
|---|
| 184 | * data
|
|---|
| 185 | */
|
|---|
| 186 | UART_MIDI_POLLING_TS = 0x36,
|
|---|
| 187 | /*
|
|---|
| 188 | * Same as UART_MIDI_POLLING_TS, but use
|
|---|
| 189 | * interrupts instead of polling
|
|---|
| 190 | */
|
|---|
| 191 | UART_MIDI_INTERRUPT_TS = 0x37,
|
|---|
| 192 |
|
|---|
| 193 | /* 0xff means amp is on, 0x00 means it's off */
|
|---|
| 194 | SPEAKER_STATUS = 0xd8,
|
|---|
| 195 |
|
|---|
| 196 | /*
|
|---|
| 197 | * DSP will generate interrupt after
|
|---|
| 198 | * every block. No other commands are
|
|---|
| 199 | * accepted in this mode. To exit
|
|---|
| 200 | * the mode send RESET command.
|
|---|
| 201 | * Note that reset will restore
|
|---|
| 202 | * previous state.
|
|---|
| 203 | */
|
|---|
| 204 | AUTO_DMA_8B_HIGH_OUTPUT = 0x90,
|
|---|
| 205 | /* Same as AUTO_DMA_8B_HIGH_OUTPUT */
|
|---|
| 206 | AUTO_DMA_8B_HIGH_INPUT = 0x98,
|
|---|
| 207 | /*
|
|---|
| 208 | * Transfer one block and exit,
|
|---|
| 209 | * generates interrupt
|
|---|
| 210 | */
|
|---|
| 211 | SINGLE_DMA_8B_HIGH_OUTPUT = 0x91,
|
|---|
| 212 | /* Same as SINGLE_DMA_8B_HIGH_OUTPUT */
|
|---|
| 213 | SINGLE_DMA_8B_HIGH_INPUT = 0x99,
|
|---|
| 214 |
|
|---|
| 215 | /* Mono mode is the default, only on 3.xx */
|
|---|
| 216 | SET_MONO_INPUT = 0xa0,
|
|---|
| 217 | /* Switch to stereo recording, only on 3.xx */
|
|---|
| 218 | SET_STEREO_INPUT = 0xa8,
|
|---|
| 219 |
|
|---|
| 220 | /*
|
|---|
| 221 | * Followed by sapling rate
|
|---|
| 222 | * 5000 to 45000 Hz, inclusive
|
|---|
| 223 | */
|
|---|
| 224 | SET_SAMPLING_RATE_OUTPUT = 0x41,
|
|---|
| 225 | /* Same as SET_SAMPLING_RATE_OUTPUT */
|
|---|
| 226 | SET_SAMPLING_RATE_INPUT = 0x42,
|
|---|
| 227 |
|
|---|
| 228 | /*
|
|---|
| 229 | * Followed by mode, size.low, size.high
|
|---|
| 230 | * mode format is:
|
|---|
| 231 | * 0x00 - unsigned mono
|
|---|
| 232 | * 0x10 - signed mono
|
|---|
| 233 | * 0x20 - unsigned stereo
|
|---|
| 234 | * 0x30 - signed stereo
|
|---|
| 235 | * Size is -1. Terminate AUTO_DMA by EXIT
|
|---|
| 236 | * or switch to SINGLE_DMA
|
|---|
| 237 | */
|
|---|
| 238 | SINGLE_DMA_16B_DA = 0xb0,
|
|---|
| 239 | SINGLE_DMA_16B_DA_FIFO = 0xb2,
|
|---|
| 240 | AUTO_DMA_16B_DA = 0xb4,
|
|---|
| 241 | AUTO_DMA_16B_DA_FIFO = 0xb6,
|
|---|
| 242 | SINGLE_DMA_16B_AD = 0xb8,
|
|---|
| 243 | SINGLE_DMA_16B_AD_FIFO = 0xba,
|
|---|
| 244 | AUTO_DMA_16B_AD = 0xbc,
|
|---|
| 245 | AUTO_DMA_16B_AD_FIFO = 0xbe,
|
|---|
| 246 |
|
|---|
| 247 | /*
|
|---|
| 248 | * Followed by mode, size.low, size.high
|
|---|
| 249 | * mode format is:
|
|---|
| 250 | * 0x00 - unsigned mono
|
|---|
| 251 | * 0x10 - signed mono
|
|---|
| 252 | * 0x20 - unsigned stereo
|
|---|
| 253 | * 0x30 - signed stereo
|
|---|
| 254 | * Size is -1. Terminate AUTO_DMA by EXIT
|
|---|
| 255 | * or switch to SINGLE_DMA
|
|---|
| 256 | */
|
|---|
| 257 | SINGLE_DMA_8B_DA = 0xc0,
|
|---|
| 258 | SINGLE_DMA_8B_DA_FIFO = 0xc2,
|
|---|
| 259 | AUTO_DMA_8B_DA = 0xc4,
|
|---|
| 260 | AUTO_DMA_8B_DA_FIFO = 0xc6,
|
|---|
| 261 | SINGLE_DMA_8B_AD = 0xc8,
|
|---|
| 262 | SINGLE_DMA_8B_AD_FIFO = 0xca,
|
|---|
| 263 | AUTO_DMA_8B_AD = 0xcc,
|
|---|
| 264 | AUTO_DMA_8B_AD_FIFO = 0xce,
|
|---|
| 265 |
|
|---|
| 266 | /* Stop sending DMA request, both SINGLE and AUTO */
|
|---|
| 267 | DMA_16B_PAUSE = 0xd5,
|
|---|
| 268 | /* Resume requests paused by DMA_16B_PAUSE */
|
|---|
| 269 | DMA_16B_CONTINUE = 0xd6,
|
|---|
| 270 | /* Ends DMA transfer and terminates I/O process */
|
|---|
| 271 | DMA_16B_EXIT = 0xd9,
|
|---|
| [b956810] | 272 | } dsp_command_t;
|
|---|
| [e941bf8] | 273 |
|
|---|
| [84d6c39] | 274 | #define DSP_MODE_SIGNED 0x10
|
|---|
| [6233c4e] | 275 | #define DSP_MODE_STEREO 0x20
|
|---|
| 276 |
|
|---|
| [1433ecda] | 277 | static inline const char *mode_to_str(uint8_t mode)
|
|---|
| [6233c4e] | 278 | {
|
|---|
| 279 | if (mode & 0xcf)
|
|---|
| 280 | return "unknown";
|
|---|
| [1433ecda] | 281 | static const char *names[] = {
|
|---|
| [6233c4e] | 282 | "unsigned mono (8bit)",
|
|---|
| 283 | "signed mono (16bit)",
|
|---|
| 284 | "unsigned stereo (8bit)",
|
|---|
| 285 | "signed stereo (16bit)",
|
|---|
| 286 | };
|
|---|
| 287 | return names[mode >> 4];
|
|---|
| 288 | }
|
|---|
| [b956810] | 289 |
|
|---|
| 290 | #endif
|
|---|
| 291 | /**
|
|---|
| 292 | * @}
|
|---|
| 293 | */
|
|---|
