source: mainline/src/main/main.c@ 26a8604f

lfn serial ticket/834-toolchain-update topic/msim-upgrade topic/simplify-dev-export
Last change on this file since 26a8604f was 169587a, checked in by Jakub Jermar <jakub@…>, 21 years ago

TLB shootdown.

  • Property mode set to 100644
File size: 5.2 KB
Line 
1/*
2 * Copyright (C) 2001-2004 Jakub Jermar
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 *
9 * - Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * - Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * - The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 */
28
29#include <arch/asm.h>
30#include <arch/context.h>
31#include <print.h>
32#include <config.h>
33#include <time/clock.h>
34#include <proc/scheduler.h>
35#include <proc/thread.h>
36#include <proc/task.h>
37#include <mm/vm.h>
38#include <main/kinit.h>
39#include <cpu.h>
40#include <mm/heap.h>
41
42#ifdef __SMP__
43#include <arch/apic.h>
44#include <arch/mp.h>
45#endif /* __SMP__ */
46
47#include <mm/frame.h>
48#include <mm/page.h>
49#include <mm/tlb.h>
50#include <synch/waitq.h>
51
52#include <arch.h>
53
54char *project = "SPARTAN kernel";
55char *copyright = "Copyright (C) 2001-2005 Jakub Jermar";
56
57config_t config;
58context_t ctx;
59
60/*
61 * These 'hardcoded' variables will be intialised by
62 * the linker with appropriate sizes and addresses.
63 */
64__u32 hardcoded_load_address = 0;
65__u32 hardcoded_ktext_size = 0;
66__u32 hardcoded_kdata_size = 0;
67
68void main_bsp(void);
69void main_ap(void);
70
71/*
72 * These two functions prevent stack from underflowing during the
73 * kernel boot phase when SP is set to the very top of the reserved
74 * space. The stack could get corrupted by a fooled compiler-generated
75 * pop sequence otherwise.
76 */
77static void main_bsp_separated_stack(void);
78static void main_ap_separated_stack(void);
79
80/*
81 * Executed by the bootstrap processor. cpu_priority_high()'d
82 */
83void main_bsp(void)
84{
85 config.cpu_count = 1;
86 config.cpu_active = 1;
87
88 config.base = hardcoded_load_address;
89 config.memory_size = CONFIG_MEMORY_SIZE;
90 config.kernel_size = hardcoded_ktext_size + hardcoded_kdata_size + CONFIG_HEAP_SIZE + CONFIG_STACK_SIZE;
91
92 context_save(&ctx);
93 ctx.sp = config.base + config.kernel_size - 8;
94 ctx.pc = (__address) main_bsp_separated_stack;
95 context_restore(&ctx);
96 /* not reached */
97}
98
99void main_bsp_separated_stack(void) {
100 vm_t *m;
101 task_t *k;
102 thread_t *t;
103
104 arch_init();
105
106 printf("%s, %s\n", project, copyright);
107
108 printf("%L: hardcoded_ktext_size=%dK, hardcoded_kdata_size=%dK\n",
109 config.base, hardcoded_ktext_size/1024, hardcoded_kdata_size/1024);
110
111 heap_init(config.base + hardcoded_ktext_size + hardcoded_kdata_size, CONFIG_HEAP_SIZE);
112 frame_init();
113 page_init();
114 tlb_init();
115
116 #ifdef __SMP__
117 mp_init(); /* Multiprocessor */
118 #endif /* __SMP__ */
119
120 cpu_init();
121 calibrate_delay_loop();
122
123 timeout_init();
124 scheduler_init();
125 task_init();
126 thread_init();
127
128 /*
129 * Create kernel vm mapping.
130 */
131 m = vm_create();
132 if (!m) panic("can't create kernel vm address space\n");
133
134 /*
135 * Create kernel task.
136 */
137 k = task_create(m);
138 if (!k) panic("can't create kernel task\n");
139
140 /*
141 * Create the first thread.
142 */
143 t = thread_create(kinit, NULL, k, 0);
144 if (!t) panic("can't create kinit thread\n");
145
146 thread_ready(t);
147
148 /*
149 * This call to scheduler() will return to kinit,
150 * starting the thread of kernel threads.
151 */
152 scheduler();
153 /* not reached */
154}
155
156#ifdef __SMP__
157/*
158 * Executed by application processors. cpu_priority_high()'d
159 * Temporary stack is at ctx.sp which was set during BP boot.
160 */
161void main_ap(void)
162{
163 /*
164 * Incrementing the active CPU counter will guarantee that the
165 * pm_init() will not attempt to build GDT and IDT tables again.
166 * Neither frame_init() will do the complete thing. Neither cpu_init()
167 * will do.
168 */
169 config.cpu_active++;
170
171 arch_init();
172 frame_init();
173 page_init();
174
175 cpu_init();
176 calibrate_delay_loop();
177
178 l_apic_init();
179 l_apic_debug();
180
181
182 /*
183 * If we woke kmp up before we left the kernel stack, we could
184 * collide with another CPU coming up. To prevent this, we
185 * switch to this cpu's private stack prior to waking kmp up.
186 */
187 the->cpu->saved_context.sp = (__address) &the->cpu->stack[CPU_STACK_SIZE-8];
188 the->cpu->saved_context.pc = (__address) main_ap_separated_stack;
189 context_restore(&the->cpu->saved_context);
190 /* not reached */
191}
192
193void main_ap_separated_stack(void)
194{
195 /*
196 * Configure timeouts for this cpu.
197 */
198 timeout_init();
199
200 waitq_wakeup(&ap_completion_wq, WAKEUP_FIRST);
201 scheduler();
202 /* not reached */
203}
204#endif /* __SMP__*/
Note: See TracBrowser for help on using the repository browser.