source: mainline/kernel/generic/src/main/kinit.c@ 9b11a971

lfn serial ticket/834-toolchain-update topic/msim-upgrade topic/simplify-dev-export
Last change on this file since 9b11a971 was c8cbd39, checked in by Vojtech Horky <vojtechhorky@…>, 13 years ago

Hack: copy kernel arguments to sysinfo

  • Property mode set to 100644
File size: 7.3 KB
Line 
1/*
2 * Copyright (c) 2001-2004 Jakub Jermar
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 *
9 * - Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * - Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * - The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 */
28
29/** @addtogroup main
30 * @{
31 */
32
33/**
34 * @file
35 * @brief Kernel initialization thread.
36 *
37 * This file contains kinit kernel thread which carries out
38 * high level system initialization.
39 *
40 * This file is responsible for finishing SMP configuration
41 * and creation of userspace init tasks.
42 */
43
44#include <main/kinit.h>
45#include <config.h>
46#include <arch.h>
47#include <proc/scheduler.h>
48#include <proc/task.h>
49#include <proc/thread.h>
50#include <proc/program.h>
51#include <panic.h>
52#include <func.h>
53#include <cpu.h>
54#include <arch/asm.h>
55#include <mm/page.h>
56#include <arch/mm/page.h>
57#include <mm/as.h>
58#include <mm/frame.h>
59#include <mm/km.h>
60#include <print.h>
61#include <memstr.h>
62#include <console/console.h>
63#include <interrupt.h>
64#include <console/kconsole.h>
65#include <security/cap.h>
66#include <lib/rd.h>
67#include <ipc/ipc.h>
68#include <debug.h>
69#include <str.h>
70#include <sysinfo/stats.h>
71#include <sysinfo/sysinfo.h>
72#include <align.h>
73
74#ifdef CONFIG_SMP
75#include <smp/smp.h>
76#endif /* CONFIG_SMP */
77
78#include <synch/waitq.h>
79#include <synch/spinlock.h>
80
81#define ALIVE_CHARS 4
82
83#ifdef CONFIG_KCONSOLE
84static char alive[ALIVE_CHARS] = "-\\|/";
85#endif
86
87#define INIT_PREFIX "init:"
88#define INIT_PREFIX_LEN 5
89
90/** Kernel initialization thread.
91 *
92 * kinit takes care of higher level kernel
93 * initialization (i.e. thread creation,
94 * userspace initialization etc.).
95 *
96 * @param arg Not used.
97 */
98void kinit(void *arg)
99{
100 thread_t *thread;
101
102 /*
103 * Detach kinit as nobody will call thread_join_timeout() on it.
104 */
105 thread_detach(THREAD);
106
107 interrupts_disable();
108
109#ifdef CONFIG_SMP
110 if (config.cpu_count > 1) {
111 waitq_initialize(&ap_completion_wq);
112
113 /*
114 * Create the kmp thread and wait for its completion.
115 * cpu1 through cpuN-1 will come up consecutively and
116 * not mess together with kcpulb threads.
117 * Just a beautification.
118 */
119 thread = thread_create(kmp, NULL, TASK,
120 THREAD_FLAG_UNCOUNTED, "kmp");
121 if (thread != NULL) {
122 thread_wire(thread, &cpus[0]);
123 thread_ready(thread);
124 } else
125 panic("Unable to create kmp thread.");
126
127 thread_join(thread);
128 thread_detach(thread);
129
130 /*
131 * For each CPU, create its load balancing thread.
132 */
133 unsigned int i;
134
135 for (i = 0; i < config.cpu_count; i++) {
136 thread = thread_create(kcpulb, NULL, TASK,
137 THREAD_FLAG_UNCOUNTED, "kcpulb");
138 if (thread != NULL) {
139 thread_wire(thread, &cpus[i]);
140 thread_ready(thread);
141 } else
142 printf("Unable to create kcpulb thread for cpu%u\n", i);
143 }
144 }
145#endif /* CONFIG_SMP */
146
147 /*
148 * At this point SMP, if present, is configured.
149 */
150 arch_post_smp_init();
151
152 /* Start thread computing system load */
153 thread = thread_create(kload, NULL, TASK, THREAD_FLAG_NONE,
154 "kload");
155 if (thread != NULL)
156 thread_ready(thread);
157 else
158 printf("Unable to create kload thread\n");
159
160#ifdef CONFIG_KCONSOLE
161 if (stdin) {
162 /*
163 * Create kernel console.
164 */
165 thread = thread_create(kconsole_thread, NULL, TASK,
166 THREAD_FLAG_NONE, "kconsole");
167 if (thread != NULL)
168 thread_ready(thread);
169 else
170 printf("Unable to create kconsole thread\n");
171 }
172#endif /* CONFIG_KCONSOLE */
173
174 interrupts_enable();
175
176 /*
177 * Create user tasks, load RAM disk images.
178 */
179 size_t i;
180 program_t programs[CONFIG_INIT_TASKS];
181
182 // FIXME: do not propagate arguments through sysinfo
183 // but pass them directly to the tasks
184 for (i = 0; i < init.cnt; i++) {
185 const char *arguments = init.tasks[i].arguments;
186 if (str_length(arguments) == 0)
187 continue;
188 if (str_length(init.tasks[i].name) == 0)
189 continue;
190 size_t arguments_size = str_size(arguments);
191
192 void *arguments_copy = malloc(arguments_size, 0);
193 if (arguments_copy == NULL)
194 continue;
195 memcpy(arguments_copy, arguments, arguments_size);
196
197 char item_name[CONFIG_TASK_NAME_BUFLEN + 15];
198 snprintf(item_name, CONFIG_TASK_NAME_BUFLEN + 15,
199 "init_args.%s", init.tasks[i].name);
200
201 sysinfo_set_item_data(item_name, NULL, arguments_copy, arguments_size);
202 }
203
204 for (i = 0; i < init.cnt; i++) {
205 if (init.tasks[i].paddr % FRAME_SIZE) {
206 printf("init[%zu]: Address is not frame aligned\n", i);
207 programs[i].task = NULL;
208 continue;
209 }
210
211 /*
212 * Construct task name from the 'init:' prefix and the
213 * name stored in the init structure (if any).
214 */
215
216 char namebuf[TASK_NAME_BUFLEN];
217
218 const char *name = init.tasks[i].name;
219 if (name[0] == 0)
220 name = "<unknown>";
221
222 ASSERT(TASK_NAME_BUFLEN >= INIT_PREFIX_LEN);
223 str_cpy(namebuf, TASK_NAME_BUFLEN, INIT_PREFIX);
224 str_cpy(namebuf + INIT_PREFIX_LEN,
225 TASK_NAME_BUFLEN - INIT_PREFIX_LEN, name);
226
227 /*
228 * Create virtual memory mappings for init task images.
229 */
230 uintptr_t page = km_map(init.tasks[i].paddr,
231 init.tasks[i].size,
232 PAGE_READ | PAGE_WRITE | PAGE_CACHEABLE);
233 ASSERT(page);
234
235 int rc = program_create_from_image((void *) page, namebuf,
236 &programs[i]);
237
238 if (rc == 0) {
239 if (programs[i].task != NULL) {
240 /*
241 * Set capabilities to init userspace tasks.
242 */
243 cap_set(programs[i].task, CAP_CAP | CAP_MEM_MANAGER |
244 CAP_IO_MANAGER | CAP_IRQ_REG);
245
246 if (!ipc_phone_0)
247 ipc_phone_0 = &programs[i].task->answerbox;
248 }
249
250 /*
251 * If programs[i].task == NULL then it is
252 * the program loader and it was registered
253 * successfully.
254 */
255 } else if (i == init.cnt - 1) {
256 /*
257 * Assume the last task is the RAM disk.
258 */
259 init_rd((void *) init.tasks[i].paddr, init.tasks[i].size);
260 } else
261 printf("init[%zu]: Init binary load failed "
262 "(error %d, loader status %u)\n", i, rc,
263 programs[i].loader_status);
264 }
265
266 /*
267 * Run user tasks.
268 */
269 for (i = 0; i < init.cnt; i++) {
270 if (programs[i].task != NULL)
271 program_ready(&programs[i]);
272 }
273
274#ifdef CONFIG_KCONSOLE
275 if (!stdin) {
276 thread_sleep(10);
277 printf("kinit: No stdin\nKernel alive: .");
278
279 unsigned int i = 0;
280 while (true) {
281 printf("\b%c", alive[i % ALIVE_CHARS]);
282 thread_sleep(1);
283 i++;
284 }
285 }
286#endif /* CONFIG_KCONSOLE */
287}
288
289/** @}
290 */
Note: See TracBrowser for help on using the repository browser.