source: mainline/kernel/generic/src/ipc/sysipc.c@ bf1fb9f

lfn serial ticket/834-toolchain-update topic/msim-upgrade topic/simplify-dev-export
Last change on this file since bf1fb9f was bf1fb9f, checked in by Jakub Jermar <jakub@…>, 16 years ago

Streamline locking of phones during cloning.

  • Property mode set to 100644
File size: 30.4 KB
Line 
1/*
2 * Copyright (c) 2006 Ondrej Palkovsky
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 *
9 * - Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * - Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * - The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 */
28
29/** @addtogroup genericipc
30 * @{
31 */
32/** @file
33 */
34
35#include <arch.h>
36#include <proc/task.h>
37#include <proc/thread.h>
38#include <errno.h>
39#include <memstr.h>
40#include <debug.h>
41#include <ipc/ipc.h>
42#include <ipc/sysipc.h>
43#include <ipc/irq.h>
44#include <ipc/ipcrsc.h>
45#include <ipc/kbox.h>
46#include <udebug/udebug_ipc.h>
47#include <arch/interrupt.h>
48#include <syscall/copy.h>
49#include <security/cap.h>
50#include <mm/as.h>
51#include <print.h>
52
53/**
54 * Maximum buffer size allowed for IPC_M_DATA_WRITE and IPC_M_DATA_READ
55 * requests.
56 */
57#define DATA_XFER_LIMIT (64 * 1024)
58
59#define GET_CHECK_PHONE(phone, phoneid, err) \
60{ \
61 if (phoneid > IPC_MAX_PHONES) { \
62 err; \
63 } \
64 phone = &TASK->phones[phoneid]; \
65}
66
67#define STRUCT_TO_USPACE(dst, src) copy_to_uspace(dst, src, sizeof(*(src)))
68
69/** Decide if the method is a system method.
70 *
71 * @param method Method to be decided.
72 *
73 * @return Return 1 if the method is a system method.
74 * Otherwise return 0.
75 */
76static inline int method_is_system(unative_t method)
77{
78 if (method <= IPC_M_LAST_SYSTEM)
79 return 1;
80 return 0;
81}
82
83/** Decide if the message with this method is forwardable.
84 *
85 * - some system messages may be forwarded, for some of them
86 * it is useless
87 *
88 * @param method Method to be decided.
89 *
90 * @return Return 1 if the method is forwardable.
91 * Otherwise return 0.
92 */
93static inline int method_is_forwardable(unative_t method)
94{
95 switch (method) {
96 case IPC_M_CONNECTION_CLONE:
97 case IPC_M_CONNECT_ME:
98 case IPC_M_PHONE_HUNGUP:
99 /* This message is meant only for the original recipient. */
100 return 0;
101 default:
102 return 1;
103 }
104}
105
106/** Decide if the message with this method is immutable on forward.
107 *
108 * - some system messages may be forwarded but their content cannot be altered
109 *
110 * @param method Method to be decided.
111 *
112 * @return Return 1 if the method is immutable on forward.
113 * Otherwise return 0.
114 */
115static inline int method_is_immutable(unative_t method)
116{
117 switch (method) {
118 case IPC_M_SHARE_OUT:
119 case IPC_M_SHARE_IN:
120 case IPC_M_DATA_WRITE:
121 case IPC_M_DATA_READ:
122 return 1;
123 break;
124 default:
125 return 0;
126 }
127}
128
129
130/***********************************************************************
131 * Functions that preprocess answer before sending it to the recepient.
132 ***********************************************************************/
133
134/** Decide if the caller (e.g. ipc_answer()) should save the old call contents
135 * for answer_preprocess().
136 *
137 * @param call Call structure to be decided.
138 *
139 * @return Return 1 if the old call contents should be saved.
140 * Return 0 otherwise.
141 */
142static inline int answer_need_old(call_t *call)
143{
144 switch (IPC_GET_METHOD(call->data)) {
145 case IPC_M_CONNECTION_CLONE:
146 case IPC_M_CONNECT_ME:
147 case IPC_M_CONNECT_TO_ME:
148 case IPC_M_CONNECT_ME_TO:
149 case IPC_M_SHARE_OUT:
150 case IPC_M_SHARE_IN:
151 case IPC_M_DATA_WRITE:
152 case IPC_M_DATA_READ:
153 return 1;
154 default:
155 return 0;
156 }
157}
158
159/** Interpret process answer as control information.
160 *
161 * This function is called directly after sys_ipc_answer().
162 *
163 * @param answer Call structure with the answer.
164 * @param olddata Saved data of the request.
165 *
166 * @return Return 0 on success or an error code.
167 */
168static inline int answer_preprocess(call_t *answer, ipc_data_t *olddata)
169{
170 int phoneid;
171
172 if ((native_t) IPC_GET_RETVAL(answer->data) == EHANGUP) {
173 /* In case of forward, hangup the forwared phone,
174 * not the originator
175 */
176 mutex_lock(&answer->data.phone->lock);
177 spinlock_lock(&TASK->answerbox.lock);
178 if (answer->data.phone->state == IPC_PHONE_CONNECTED) {
179 list_remove(&answer->data.phone->link);
180 answer->data.phone->state = IPC_PHONE_SLAMMED;
181 }
182 spinlock_unlock(&TASK->answerbox.lock);
183 mutex_unlock(&answer->data.phone->lock);
184 }
185
186 if (!olddata)
187 return 0;
188
189 if (IPC_GET_METHOD(*olddata) == IPC_M_CONNECTION_CLONE) {
190 phoneid = IPC_GET_ARG1(*olddata);
191 phone_t *phone = &TASK->phones[phoneid];
192 if (IPC_GET_RETVAL(answer->data) != EOK) {
193 /*
194 * The recipient of the cloned phone rejected the offer.
195 * In this case, the connection was established at the
196 * request time and therefore we need to slam the phone.
197 * We don't merely hangup as that would result in
198 * sending IPC_M_HUNGUP to the third party on the
199 * other side of the cloned phone.
200 */
201 mutex_lock(&phone->lock);
202 if (phone->state == IPC_PHONE_CONNECTED) {
203 spinlock_lock(&phone->callee->lock);
204 list_remove(&phone->link);
205 phone->state = IPC_PHONE_SLAMMED;
206 spinlock_unlock(&phone->callee->lock);
207 }
208 mutex_unlock(&phone->lock);
209 }
210 } else if (IPC_GET_METHOD(*olddata) == IPC_M_CONNECT_ME) {
211 phone_t *phone = (phone_t *)IPC_GET_ARG5(*olddata);
212 if (IPC_GET_RETVAL(answer->data) != EOK) {
213 /*
214 * The other party on the cloned phoned rejected our
215 * request for connection on the protocol level.
216 * We need to break the connection without sending
217 * IPC_M_HUNGUP back.
218 */
219 mutex_lock(&phone->lock);
220 if (phone->state == IPC_PHONE_CONNECTED) {
221 spinlock_lock(&phone->callee->lock);
222 list_remove(&phone->link);
223 phone->state = IPC_PHONE_SLAMMED;
224 spinlock_unlock(&phone->callee->lock);
225 }
226 mutex_unlock(&phone->lock);
227 }
228 } else if (IPC_GET_METHOD(*olddata) == IPC_M_CONNECT_TO_ME) {
229 phoneid = IPC_GET_ARG5(*olddata);
230 if (IPC_GET_RETVAL(answer->data) != EOK) {
231 /* The connection was not accepted */
232 phone_dealloc(phoneid);
233 } else {
234 /* The connection was accepted */
235 phone_connect(phoneid, &answer->sender->answerbox);
236 /* Set 'phone hash' as arg5 of response */
237 IPC_SET_ARG5(answer->data,
238 (unative_t) &TASK->phones[phoneid]);
239 }
240 } else if (IPC_GET_METHOD(*olddata) == IPC_M_CONNECT_ME_TO) {
241 /* If the users accepted call, connect */
242 if (IPC_GET_RETVAL(answer->data) == EOK) {
243 ipc_phone_connect((phone_t *) IPC_GET_ARG5(*olddata),
244 &TASK->answerbox);
245 }
246 } else if (IPC_GET_METHOD(*olddata) == IPC_M_SHARE_OUT) {
247 if (!IPC_GET_RETVAL(answer->data)) {
248 /* Accepted, handle as_area receipt */
249 ipl_t ipl;
250 int rc;
251 as_t *as;
252
253 ipl = interrupts_disable();
254 spinlock_lock(&answer->sender->lock);
255 as = answer->sender->as;
256 spinlock_unlock(&answer->sender->lock);
257 interrupts_restore(ipl);
258
259 rc = as_area_share(as, IPC_GET_ARG1(*olddata),
260 IPC_GET_ARG2(*olddata), AS,
261 IPC_GET_ARG1(answer->data), IPC_GET_ARG3(*olddata));
262 IPC_SET_RETVAL(answer->data, rc);
263 return rc;
264 }
265 } else if (IPC_GET_METHOD(*olddata) == IPC_M_SHARE_IN) {
266 if (!IPC_GET_RETVAL(answer->data)) {
267 ipl_t ipl;
268 as_t *as;
269 int rc;
270
271 ipl = interrupts_disable();
272 spinlock_lock(&answer->sender->lock);
273 as = answer->sender->as;
274 spinlock_unlock(&answer->sender->lock);
275 interrupts_restore(ipl);
276
277 rc = as_area_share(AS, IPC_GET_ARG1(answer->data),
278 IPC_GET_ARG2(*olddata), as, IPC_GET_ARG1(*olddata),
279 IPC_GET_ARG2(answer->data));
280 IPC_SET_RETVAL(answer->data, rc);
281 }
282 } else if (IPC_GET_METHOD(*olddata) == IPC_M_DATA_READ) {
283 ASSERT(!answer->buffer);
284 if (!IPC_GET_RETVAL(answer->data)) {
285 /* The recipient agreed to send data. */
286 uintptr_t src = IPC_GET_ARG1(answer->data);
287 uintptr_t dst = IPC_GET_ARG1(*olddata);
288 size_t max_size = IPC_GET_ARG2(*olddata);
289 size_t size = IPC_GET_ARG2(answer->data);
290 if (size && size <= max_size) {
291 /*
292 * Copy the destination VA so that this piece of
293 * information is not lost.
294 */
295 IPC_SET_ARG1(answer->data, dst);
296
297 answer->buffer = malloc(size, 0);
298 int rc = copy_from_uspace(answer->buffer,
299 (void *) src, size);
300 if (rc) {
301 IPC_SET_RETVAL(answer->data, rc);
302 free(answer->buffer);
303 answer->buffer = NULL;
304 }
305 } else if (!size) {
306 IPC_SET_RETVAL(answer->data, EOK);
307 } else {
308 IPC_SET_RETVAL(answer->data, ELIMIT);
309 }
310 }
311 } else if (IPC_GET_METHOD(*olddata) == IPC_M_DATA_WRITE) {
312 ASSERT(answer->buffer);
313 if (!IPC_GET_RETVAL(answer->data)) {
314 /* The recipient agreed to receive data. */
315 int rc;
316 uintptr_t dst;
317 size_t size;
318 size_t max_size;
319
320 dst = (uintptr_t)IPC_GET_ARG1(answer->data);
321 size = (size_t)IPC_GET_ARG2(answer->data);
322 max_size = (size_t)IPC_GET_ARG2(*olddata);
323
324 if (size <= max_size) {
325 rc = copy_to_uspace((void *) dst,
326 answer->buffer, size);
327 if (rc)
328 IPC_SET_RETVAL(answer->data, rc);
329 } else {
330 IPC_SET_RETVAL(answer->data, ELIMIT);
331 }
332 }
333 free(answer->buffer);
334 answer->buffer = NULL;
335 }
336 return 0;
337}
338
339static void phones_lock(phone_t *p1, phone_t *p2)
340{
341 if (p1 < p2) {
342 mutex_lock(&p1->lock);
343 mutex_lock(&p2->lock);
344 } else if (p1 > p2) {
345 mutex_lock(&p2->lock);
346 mutex_lock(&p1->lock);
347 } else {
348 mutex_lock(&p1->lock);
349 }
350}
351
352static void phones_unlock(phone_t *p1, phone_t *p2)
353{
354 mutex_unlock(&p1->lock);
355 if (p1 != p2)
356 mutex_unlock(&p2->lock);
357}
358
359/** Called before the request is sent.
360 *
361 * @param call Call structure with the request.
362 * @param phone Phone that the call will be sent through.
363 *
364 * @return Return 0 on success, ELIMIT or EPERM on error.
365 */
366static int request_preprocess(call_t *call, phone_t *phone)
367{
368 int newphid;
369 size_t size;
370 uintptr_t src;
371 int rc;
372
373 switch (IPC_GET_METHOD(call->data)) {
374 case IPC_M_CONNECTION_CLONE: {
375 phone_t *cloned_phone;
376 GET_CHECK_PHONE(cloned_phone, IPC_GET_ARG1(call->data),
377 return ENOENT);
378 phones_lock(cloned_phone, phone);
379 if ((cloned_phone->state != IPC_PHONE_CONNECTED) ||
380 phone->state != IPC_PHONE_CONNECTED) {
381 phones_unlock(cloned_phone, phone);
382 return EINVAL;
383 }
384 /*
385 * We can be pretty sure now that both tasks exist and we are
386 * connected to them. As we continue to hold the phone locks,
387 * we are effectively preventing them from finishing their
388 * potential cleanup.
389 */
390 newphid = phone_alloc(phone->callee->task);
391 if (newphid < 0) {
392 phones_unlock(cloned_phone, phone);
393 return ELIMIT;
394 }
395 ipc_phone_connect(&phone->callee->task->phones[newphid],
396 cloned_phone->callee);
397 phones_unlock(cloned_phone, phone);
398 /* Set the new phone for the callee. */
399 IPC_SET_ARG1(call->data, newphid);
400 break;
401 }
402 case IPC_M_CONNECT_ME:
403 IPC_SET_ARG5(call->data, (unative_t) phone);
404 break;
405 case IPC_M_CONNECT_ME_TO:
406 newphid = phone_alloc(TASK);
407 if (newphid < 0)
408 return ELIMIT;
409 /* Set arg5 for server */
410 IPC_SET_ARG5(call->data, (unative_t) &TASK->phones[newphid]);
411 call->flags |= IPC_CALL_CONN_ME_TO;
412 call->priv = newphid;
413 break;
414 case IPC_M_SHARE_OUT:
415 size = as_area_get_size(IPC_GET_ARG1(call->data));
416 if (!size)
417 return EPERM;
418 IPC_SET_ARG2(call->data, size);
419 break;
420 case IPC_M_DATA_READ:
421 size = IPC_GET_ARG2(call->data);
422 if ((size <= 0 || (size > DATA_XFER_LIMIT)))
423 return ELIMIT;
424 break;
425 case IPC_M_DATA_WRITE:
426 src = IPC_GET_ARG1(call->data);
427 size = IPC_GET_ARG2(call->data);
428
429 if (size > DATA_XFER_LIMIT)
430 return ELIMIT;
431
432 call->buffer = (uint8_t *) malloc(size, 0);
433 rc = copy_from_uspace(call->buffer, (void *) src, size);
434 if (rc != 0) {
435 free(call->buffer);
436 return rc;
437 }
438 break;
439#ifdef CONFIG_UDEBUG
440 case IPC_M_DEBUG_ALL:
441 return udebug_request_preprocess(call, phone);
442#endif
443 default:
444 break;
445 }
446 return 0;
447}
448
449/*******************************************************************************
450 * Functions called to process received call/answer before passing it to uspace.
451 *******************************************************************************/
452
453/** Do basic kernel processing of received call answer.
454 *
455 * @param call Call structure with the answer.
456 */
457static void process_answer(call_t *call)
458{
459 if (((native_t) IPC_GET_RETVAL(call->data) == EHANGUP) &&
460 (call->flags & IPC_CALL_FORWARDED))
461 IPC_SET_RETVAL(call->data, EFORWARD);
462
463 if (call->flags & IPC_CALL_CONN_ME_TO) {
464 if (IPC_GET_RETVAL(call->data))
465 phone_dealloc(call->priv);
466 else
467 IPC_SET_ARG5(call->data, call->priv);
468 }
469
470 if (call->buffer) {
471 /* This must be an affirmative answer to IPC_M_DATA_READ. */
472 /* or IPC_M_DEBUG_ALL/UDEBUG_M_MEM_READ... */
473 uintptr_t dst = IPC_GET_ARG1(call->data);
474 size_t size = IPC_GET_ARG2(call->data);
475 int rc = copy_to_uspace((void *) dst, call->buffer, size);
476 if (rc)
477 IPC_SET_RETVAL(call->data, rc);
478 free(call->buffer);
479 call->buffer = NULL;
480 }
481}
482
483/** Do basic kernel processing of received call request.
484 *
485 * @param box Destination answerbox structure.
486 * @param call Call structure with the request.
487 *
488 * @return Return 0 if the call should be passed to userspace.
489 * Return -1 if the call should be ignored.
490 */
491static int process_request(answerbox_t *box, call_t *call)
492{
493 int phoneid;
494
495 if (IPC_GET_METHOD(call->data) == IPC_M_CONNECT_TO_ME) {
496 phoneid = phone_alloc(TASK);
497 if (phoneid < 0) { /* Failed to allocate phone */
498 IPC_SET_RETVAL(call->data, ELIMIT);
499 ipc_answer(box, call);
500 return -1;
501 }
502 IPC_SET_ARG5(call->data, phoneid);
503 }
504 switch (IPC_GET_METHOD(call->data)) {
505 case IPC_M_DEBUG_ALL:
506 return -1;
507 default:
508 break;
509 }
510 return 0;
511}
512
513/** Make a fast call over IPC, wait for reply and return to user.
514 *
515 * This function can handle only three arguments of payload, but is faster than
516 * the generic function (i.e. sys_ipc_call_sync_slow()).
517 *
518 * @param phoneid Phone handle for the call.
519 * @param method Method of the call.
520 * @param arg1 Service-defined payload argument.
521 * @param arg2 Service-defined payload argument.
522 * @param arg3 Service-defined payload argument.
523 * @param data Address of userspace structure where the reply call will
524 * be stored.
525 *
526 * @return Returns 0 on success.
527 * Return ENOENT if there is no such phone handle.
528 */
529unative_t sys_ipc_call_sync_fast(unative_t phoneid, unative_t method,
530 unative_t arg1, unative_t arg2, unative_t arg3, ipc_data_t *data)
531{
532 call_t call;
533 phone_t *phone;
534 int res;
535 int rc;
536
537 GET_CHECK_PHONE(phone, phoneid, return ENOENT);
538
539 ipc_call_static_init(&call);
540 IPC_SET_METHOD(call.data, method);
541 IPC_SET_ARG1(call.data, arg1);
542 IPC_SET_ARG2(call.data, arg2);
543 IPC_SET_ARG3(call.data, arg3);
544 /*
545 * To achieve deterministic behavior, zero out arguments that are beyond
546 * the limits of the fast version.
547 */
548 IPC_SET_ARG4(call.data, 0);
549 IPC_SET_ARG5(call.data, 0);
550
551 if (!(res = request_preprocess(&call, phone))) {
552#ifdef CONFIG_UDEBUG
553 udebug_stoppable_begin();
554#endif
555 rc = ipc_call_sync(phone, &call);
556#ifdef CONFIG_UDEBUG
557 udebug_stoppable_end();
558#endif
559 if (rc != EOK)
560 return rc;
561 process_answer(&call);
562
563 } else {
564 IPC_SET_RETVAL(call.data, res);
565 }
566 rc = STRUCT_TO_USPACE(&data->args, &call.data.args);
567 if (rc != 0)
568 return rc;
569
570 return 0;
571}
572
573/** Make a synchronous IPC call allowing to transmit the entire payload.
574 *
575 * @param phoneid Phone handle for the call.
576 * @param question Userspace address of call data with the request.
577 * @param reply Userspace address of call data where to store the
578 * answer.
579 *
580 * @return Zero on success or an error code.
581 */
582unative_t sys_ipc_call_sync_slow(unative_t phoneid, ipc_data_t *question,
583 ipc_data_t *reply)
584{
585 call_t call;
586 phone_t *phone;
587 int res;
588 int rc;
589
590 ipc_call_static_init(&call);
591 rc = copy_from_uspace(&call.data.args, &question->args,
592 sizeof(call.data.args));
593 if (rc != 0)
594 return (unative_t) rc;
595
596 GET_CHECK_PHONE(phone, phoneid, return ENOENT);
597
598 if (!(res = request_preprocess(&call, phone))) {
599#ifdef CONFIG_UDEBUG
600 udebug_stoppable_begin();
601#endif
602 rc = ipc_call_sync(phone, &call);
603#ifdef CONFIG_UDEBUG
604 udebug_stoppable_end();
605#endif
606 if (rc != EOK)
607 return rc;
608 process_answer(&call);
609 } else
610 IPC_SET_RETVAL(call.data, res);
611
612 rc = STRUCT_TO_USPACE(&reply->args, &call.data.args);
613 if (rc != 0)
614 return rc;
615
616 return 0;
617}
618
619/** Check that the task did not exceed the allowed limit of asynchronous calls.
620 *
621 * @return Return 0 if limit not reached or -1 if limit exceeded.
622 */
623static int check_call_limit(void)
624{
625 if (atomic_preinc(&TASK->active_calls) > IPC_MAX_ASYNC_CALLS) {
626 atomic_dec(&TASK->active_calls);
627 return -1;
628 }
629 return 0;
630}
631
632/** Make a fast asynchronous call over IPC.
633 *
634 * This function can only handle four arguments of payload, but is faster than
635 * the generic function sys_ipc_call_async_slow().
636 *
637 * @param phoneid Phone handle for the call.
638 * @param method Method of the call.
639 * @param arg1 Service-defined payload argument.
640 * @param arg2 Service-defined payload argument.
641 * @param arg3 Service-defined payload argument.
642 * @param arg4 Service-defined payload argument.
643 *
644 * @return Return call hash on success.
645 * Return IPC_CALLRET_FATAL in case of a fatal error and
646 * IPC_CALLRET_TEMPORARY if there are too many pending
647 * asynchronous requests; answers should be handled first.
648 */
649unative_t sys_ipc_call_async_fast(unative_t phoneid, unative_t method,
650 unative_t arg1, unative_t arg2, unative_t arg3, unative_t arg4)
651{
652 call_t *call;
653 phone_t *phone;
654 int res;
655
656 if (check_call_limit())
657 return IPC_CALLRET_TEMPORARY;
658
659 GET_CHECK_PHONE(phone, phoneid, return IPC_CALLRET_FATAL);
660
661 call = ipc_call_alloc(0);
662 IPC_SET_METHOD(call->data, method);
663 IPC_SET_ARG1(call->data, arg1);
664 IPC_SET_ARG2(call->data, arg2);
665 IPC_SET_ARG3(call->data, arg3);
666 IPC_SET_ARG4(call->data, arg4);
667 /*
668 * To achieve deterministic behavior, zero out arguments that are beyond
669 * the limits of the fast version.
670 */
671 IPC_SET_ARG5(call->data, 0);
672
673 if (!(res = request_preprocess(call, phone)))
674 ipc_call(phone, call);
675 else
676 ipc_backsend_err(phone, call, res);
677
678 return (unative_t) call;
679}
680
681/** Make an asynchronous IPC call allowing to transmit the entire payload.
682 *
683 * @param phoneid Phone handle for the call.
684 * @param data Userspace address of call data with the request.
685 *
686 * @return See sys_ipc_call_async_fast().
687 */
688unative_t sys_ipc_call_async_slow(unative_t phoneid, ipc_data_t *data)
689{
690 call_t *call;
691 phone_t *phone;
692 int res;
693 int rc;
694
695 if (check_call_limit())
696 return IPC_CALLRET_TEMPORARY;
697
698 GET_CHECK_PHONE(phone, phoneid, return IPC_CALLRET_FATAL);
699
700 call = ipc_call_alloc(0);
701 rc = copy_from_uspace(&call->data.args, &data->args,
702 sizeof(call->data.args));
703 if (rc != 0) {
704 ipc_call_free(call);
705 return (unative_t) rc;
706 }
707 if (!(res = request_preprocess(call, phone)))
708 ipc_call(phone, call);
709 else
710 ipc_backsend_err(phone, call, res);
711
712 return (unative_t) call;
713}
714
715/** Forward a received call to another destination - common code for both the
716 * fast and the slow version.
717 *
718 * @param callid Hash of the call to forward.
719 * @param phoneid Phone handle to use for forwarding.
720 * @param method New method to use for the forwarded call.
721 * @param arg1 New value of the first argument for the forwarded call.
722 * @param arg2 New value of the second argument for the forwarded call.
723 * @param arg3 New value of the third argument for the forwarded call.
724 * @param arg4 New value of the fourth argument for the forwarded call.
725 * @param arg5 New value of the fifth argument for the forwarded call.
726 * @param mode Flags that specify mode of the forward operation.
727 * @param slow If true, arg3, arg4 and arg5 are considered. Otherwise
728 * the function considers only the fast version arguments:
729 * i.e. arg1 and arg2.
730 *
731 * @return Return 0 on succes, otherwise return an error code.
732 *
733 * Warning: Make sure that ARG5 is not rewritten for certain system IPC
734 */
735static unative_t sys_ipc_forward_common(unative_t callid, unative_t phoneid,
736 unative_t method, unative_t arg1, unative_t arg2, unative_t arg3,
737 unative_t arg4, unative_t arg5, int mode, bool slow)
738{
739 call_t *call;
740 phone_t *phone;
741
742 call = get_call(callid);
743 if (!call)
744 return ENOENT;
745
746 call->flags |= IPC_CALL_FORWARDED;
747
748 GET_CHECK_PHONE(phone, phoneid, {
749 IPC_SET_RETVAL(call->data, EFORWARD);
750 ipc_answer(&TASK->answerbox, call);
751 return ENOENT;
752 });
753
754 if (!method_is_forwardable(IPC_GET_METHOD(call->data))) {
755 IPC_SET_RETVAL(call->data, EFORWARD);
756 ipc_answer(&TASK->answerbox, call);
757 return EPERM;
758 }
759
760 /*
761 * Userspace is not allowed to change method of system methods on
762 * forward, allow changing ARG1, ARG2, ARG3 and ARG4 by means of method,
763 * arg1, arg2 and arg3.
764 * If the method is immutable, don't change anything.
765 */
766 if (!method_is_immutable(IPC_GET_METHOD(call->data))) {
767 if (method_is_system(IPC_GET_METHOD(call->data))) {
768 if (IPC_GET_METHOD(call->data) == IPC_M_CONNECT_TO_ME)
769 phone_dealloc(IPC_GET_ARG5(call->data));
770
771 IPC_SET_ARG1(call->data, method);
772 IPC_SET_ARG2(call->data, arg1);
773 IPC_SET_ARG3(call->data, arg2);
774 if (slow) {
775 IPC_SET_ARG4(call->data, arg3);
776 /*
777 * For system methods we deliberately don't
778 * overwrite ARG5.
779 */
780 }
781 } else {
782 IPC_SET_METHOD(call->data, method);
783 IPC_SET_ARG1(call->data, arg1);
784 IPC_SET_ARG2(call->data, arg2);
785 if (slow) {
786 IPC_SET_ARG3(call->data, arg3);
787 IPC_SET_ARG4(call->data, arg4);
788 IPC_SET_ARG5(call->data, arg5);
789 }
790 }
791 }
792
793 return ipc_forward(call, phone, &TASK->answerbox, mode);
794}
795
796/** Forward a received call to another destination - fast version.
797 *
798 * @param callid Hash of the call to forward.
799 * @param phoneid Phone handle to use for forwarding.
800 * @param method New method to use for the forwarded call.
801 * @param arg1 New value of the first argument for the forwarded call.
802 * @param arg2 New value of the second argument for the forwarded call.
803 * @param mode Flags that specify mode of the forward operation.
804 *
805 * @return Return 0 on succes, otherwise return an error code.
806 *
807 * In case the original method is a system method, ARG1, ARG2 and ARG3 are
808 * overwritten in the forwarded message with the new method and the new
809 * arg1 and arg2, respectively. Otherwise the METHOD, ARG1 and ARG2 are
810 * rewritten with the new method, arg1 and arg2, respectively. Also note there
811 * is a set of immutable methods, for which the new method and arguments are not
812 * set and these values are ignored.
813 */
814unative_t sys_ipc_forward_fast(unative_t callid, unative_t phoneid,
815 unative_t method, unative_t arg1, unative_t arg2, int mode)
816{
817 return sys_ipc_forward_common(callid, phoneid, method, arg1, arg2, 0, 0,
818 0, mode, false);
819}
820
821/** Forward a received call to another destination - slow version.
822 *
823 * @param callid Hash of the call to forward.
824 * @param phoneid Phone handle to use for forwarding.
825 * @param data Userspace address of the new IPC data.
826 * @param mode Flags that specify mode of the forward operation.
827 *
828 * @return Return 0 on succes, otherwise return an error code.
829 *
830 * This function is the slow verision of the sys_ipc_forward_fast interface.
831 * It can copy all five new arguments and the new method from the userspace.
832 * It naturally extends the functionality of the fast version. For system
833 * methods, it additionally stores the new value of arg3 to ARG4. For non-system
834 * methods, it additionally stores the new value of arg3, arg4 and arg5,
835 * respectively, to ARG3, ARG4 and ARG5, respectively.
836 */
837unative_t sys_ipc_forward_slow(unative_t callid, unative_t phoneid,
838 ipc_data_t *data, int mode)
839{
840 ipc_data_t newdata;
841 int rc;
842
843 rc = copy_from_uspace(&newdata.args, &data->args,
844 sizeof(newdata.args));
845 if (rc != 0)
846 return (unative_t) rc;
847
848 return sys_ipc_forward_common(callid, phoneid,
849 IPC_GET_METHOD(newdata), IPC_GET_ARG1(newdata),
850 IPC_GET_ARG2(newdata), IPC_GET_ARG3(newdata),
851 IPC_GET_ARG4(newdata), IPC_GET_ARG5(newdata), mode, true);
852}
853
854/** Answer an IPC call - fast version.
855 *
856 * This function can handle only two return arguments of payload, but is faster
857 * than the generic sys_ipc_answer().
858 *
859 * @param callid Hash of the call to be answered.
860 * @param retval Return value of the answer.
861 * @param arg1 Service-defined return value.
862 * @param arg2 Service-defined return value.
863 * @param arg3 Service-defined return value.
864 * @param arg4 Service-defined return value.
865 *
866 * @return Return 0 on success, otherwise return an error code.
867 */
868unative_t sys_ipc_answer_fast(unative_t callid, unative_t retval,
869 unative_t arg1, unative_t arg2, unative_t arg3, unative_t arg4)
870{
871 call_t *call;
872 ipc_data_t saved_data;
873 int saveddata = 0;
874 int rc;
875
876 /* Do not answer notification callids */
877 if (callid & IPC_CALLID_NOTIFICATION)
878 return 0;
879
880 call = get_call(callid);
881 if (!call)
882 return ENOENT;
883
884 if (answer_need_old(call)) {
885 memcpy(&saved_data, &call->data, sizeof(call->data));
886 saveddata = 1;
887 }
888
889 IPC_SET_RETVAL(call->data, retval);
890 IPC_SET_ARG1(call->data, arg1);
891 IPC_SET_ARG2(call->data, arg2);
892 IPC_SET_ARG3(call->data, arg3);
893 IPC_SET_ARG4(call->data, arg4);
894 /*
895 * To achieve deterministic behavior, zero out arguments that are beyond
896 * the limits of the fast version.
897 */
898 IPC_SET_ARG5(call->data, 0);
899 rc = answer_preprocess(call, saveddata ? &saved_data : NULL);
900
901 ipc_answer(&TASK->answerbox, call);
902 return rc;
903}
904
905/** Answer an IPC call.
906 *
907 * @param callid Hash of the call to be answered.
908 * @param data Userspace address of call data with the answer.
909 *
910 * @return Return 0 on success, otherwise return an error code.
911 */
912unative_t sys_ipc_answer_slow(unative_t callid, ipc_data_t *data)
913{
914 call_t *call;
915 ipc_data_t saved_data;
916 int saveddata = 0;
917 int rc;
918
919 /* Do not answer notification callids */
920 if (callid & IPC_CALLID_NOTIFICATION)
921 return 0;
922
923 call = get_call(callid);
924 if (!call)
925 return ENOENT;
926
927 if (answer_need_old(call)) {
928 memcpy(&saved_data, &call->data, sizeof(call->data));
929 saveddata = 1;
930 }
931 rc = copy_from_uspace(&call->data.args, &data->args,
932 sizeof(call->data.args));
933 if (rc != 0)
934 return rc;
935
936 rc = answer_preprocess(call, saveddata ? &saved_data : NULL);
937
938 ipc_answer(&TASK->answerbox, call);
939
940 return rc;
941}
942
943/** Hang up a phone.
944 *
945 * @param Phone handle of the phone to be hung up.
946 *
947 * @return Return 0 on success or an error code.
948 */
949unative_t sys_ipc_hangup(int phoneid)
950{
951 phone_t *phone;
952
953 GET_CHECK_PHONE(phone, phoneid, return ENOENT);
954
955 if (ipc_phone_hangup(phone))
956 return -1;
957
958 return 0;
959}
960
961/** Wait for an incoming IPC call or an answer.
962 *
963 * @param calldata Pointer to buffer where the call/answer data is stored.
964 * @param usec Timeout. See waitq_sleep_timeout() for explanation.
965 * @param flags Select mode of sleep operation. See waitq_sleep_timeout()
966 * for explanation.
967 *
968 * @return Hash of the call.
969 * If IPC_CALLID_NOTIFICATION bit is set in the hash, the
970 * call is a notification. IPC_CALLID_ANSWERED denotes an
971 * answer.
972 */
973unative_t sys_ipc_wait_for_call(ipc_data_t *calldata, uint32_t usec, int flags)
974{
975 call_t *call;
976
977restart:
978
979#ifdef CONFIG_UDEBUG
980 udebug_stoppable_begin();
981#endif
982 call = ipc_wait_for_call(&TASK->answerbox, usec,
983 flags | SYNCH_FLAGS_INTERRUPTIBLE);
984
985#ifdef CONFIG_UDEBUG
986 udebug_stoppable_end();
987#endif
988 if (!call)
989 return 0;
990
991 if (call->flags & IPC_CALL_NOTIF) {
992 ASSERT(! (call->flags & IPC_CALL_STATIC_ALLOC));
993
994 /* Set in_phone_hash to the interrupt counter */
995 call->data.phone = (void *) call->priv;
996
997 STRUCT_TO_USPACE(calldata, &call->data);
998
999 ipc_call_free(call);
1000
1001 return ((unative_t) call) | IPC_CALLID_NOTIFICATION;
1002 }
1003
1004 if (call->flags & IPC_CALL_ANSWERED) {
1005 process_answer(call);
1006
1007 ASSERT(! (call->flags & IPC_CALL_STATIC_ALLOC));
1008
1009 if (call->flags & IPC_CALL_DISCARD_ANSWER) {
1010 ipc_call_free(call);
1011 goto restart;
1012 } else {
1013 /*
1014 * Decrement the counter of active calls only if the
1015 * call is not an answer to IPC_M_PHONE_HUNGUP,
1016 * which doesn't contribute to the counter.
1017 */
1018 atomic_dec(&TASK->active_calls);
1019 }
1020
1021 STRUCT_TO_USPACE(&calldata->args, &call->data.args);
1022 ipc_call_free(call);
1023
1024 return ((unative_t) call) | IPC_CALLID_ANSWERED;
1025 }
1026
1027 if (process_request(&TASK->answerbox, call))
1028 goto restart;
1029
1030 /* Include phone address('id') of the caller in the request,
1031 * copy whole call->data, not only call->data.args */
1032 if (STRUCT_TO_USPACE(calldata, &call->data)) {
1033 /*
1034 * The callee will not receive this call and no one else has
1035 * a chance to answer it. Reply with the EPARTY error code.
1036 */
1037 ipc_data_t saved_data;
1038 int saveddata = 0;
1039
1040 if (answer_need_old(call)) {
1041 memcpy(&saved_data, &call->data, sizeof(call->data));
1042 saveddata = 1;
1043 }
1044
1045 IPC_SET_RETVAL(call->data, EPARTY);
1046 (void) answer_preprocess(call, saveddata ? &saved_data : NULL);
1047 ipc_answer(&TASK->answerbox, call);
1048 return 0;
1049 }
1050 return (unative_t)call;
1051}
1052
1053/** Connect an IRQ handler to a task.
1054 *
1055 * @param inr IRQ number.
1056 * @param devno Device number.
1057 * @param method Method to be associated with the notification.
1058 * @param ucode Uspace pointer to the top-half pseudocode.
1059 *
1060 * @return EPERM or a return code returned by ipc_irq_register().
1061 */
1062unative_t sys_ipc_register_irq(inr_t inr, devno_t devno, unative_t method,
1063 irq_code_t *ucode)
1064{
1065 if (!(cap_get(TASK) & CAP_IRQ_REG))
1066 return EPERM;
1067
1068 return ipc_irq_register(&TASK->answerbox, inr, devno, method, ucode);
1069}
1070
1071/** Disconnect an IRQ handler from a task.
1072 *
1073 * @param inr IRQ number.
1074 * @param devno Device number.
1075 *
1076 * @return Zero on success or EPERM on error..
1077 */
1078unative_t sys_ipc_unregister_irq(inr_t inr, devno_t devno)
1079{
1080 if (!(cap_get(TASK) & CAP_IRQ_REG))
1081 return EPERM;
1082
1083 ipc_irq_unregister(&TASK->answerbox, inr, devno);
1084
1085 return 0;
1086}
1087
1088#include <console/console.h>
1089
1090/**
1091 * Syscall connect to a task by id.
1092 *
1093 * @return Phone id on success, or negative error code.
1094 */
1095unative_t sys_ipc_connect_kbox(sysarg64_t *uspace_taskid_arg)
1096{
1097#ifdef CONFIG_UDEBUG
1098 sysarg64_t taskid_arg;
1099 int rc;
1100
1101 rc = copy_from_uspace(&taskid_arg, uspace_taskid_arg, sizeof(sysarg64_t));
1102 if (rc != 0)
1103 return (unative_t) rc;
1104
1105 LOG("sys_ipc_connect_kbox(%" PRIu64 ")\n", taskid_arg.value);
1106
1107 return ipc_connect_kbox(taskid_arg.value);
1108#else
1109 return (unative_t) ENOTSUP;
1110#endif
1111}
1112
1113/** @}
1114 */
Note: See TracBrowser for help on using the repository browser.