source: mainline/kernel/generic/src/ipc/sysipc.c@ 4ef6645

lfn serial ticket/834-toolchain-update topic/msim-upgrade topic/simplify-dev-export
Last change on this file since 4ef6645 was 4ef6645, checked in by Jakub Jermar <jakub@…>, 16 years ago

Surprisingly easy support for homogenous mounts.
It works by simply allowing autoconnections.

  • Property mode set to 100644
File size: 30.4 KB
Line 
1/*
2 * Copyright (c) 2006 Ondrej Palkovsky
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 *
9 * - Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * - Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * - The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 */
28
29/** @addtogroup genericipc
30 * @{
31 */
32/** @file
33 */
34
35#include <arch.h>
36#include <proc/task.h>
37#include <proc/thread.h>
38#include <errno.h>
39#include <memstr.h>
40#include <debug.h>
41#include <ipc/ipc.h>
42#include <ipc/sysipc.h>
43#include <ipc/irq.h>
44#include <ipc/ipcrsc.h>
45#include <ipc/kbox.h>
46#include <udebug/udebug_ipc.h>
47#include <arch/interrupt.h>
48#include <syscall/copy.h>
49#include <security/cap.h>
50#include <mm/as.h>
51#include <print.h>
52
53/**
54 * Maximum buffer size allowed for IPC_M_DATA_WRITE and IPC_M_DATA_READ
55 * requests.
56 */
57#define DATA_XFER_LIMIT (64 * 1024)
58
59#define GET_CHECK_PHONE(phone, phoneid, err) \
60{ \
61 if (phoneid > IPC_MAX_PHONES) { \
62 err; \
63 } \
64 phone = &TASK->phones[phoneid]; \
65}
66
67#define STRUCT_TO_USPACE(dst, src) copy_to_uspace(dst, src, sizeof(*(src)))
68
69/** Decide if the method is a system method.
70 *
71 * @param method Method to be decided.
72 *
73 * @return Return 1 if the method is a system method.
74 * Otherwise return 0.
75 */
76static inline int method_is_system(unative_t method)
77{
78 if (method <= IPC_M_LAST_SYSTEM)
79 return 1;
80 return 0;
81}
82
83/** Decide if the message with this method is forwardable.
84 *
85 * - some system messages may be forwarded, for some of them
86 * it is useless
87 *
88 * @param method Method to be decided.
89 *
90 * @return Return 1 if the method is forwardable.
91 * Otherwise return 0.
92 */
93static inline int method_is_forwardable(unative_t method)
94{
95 switch (method) {
96 case IPC_M_CONNECTION_CLONE:
97 case IPC_M_CONNECT_ME:
98 case IPC_M_PHONE_HUNGUP:
99 /* This message is meant only for the original recipient. */
100 return 0;
101 default:
102 return 1;
103 }
104}
105
106/** Decide if the message with this method is immutable on forward.
107 *
108 * - some system messages may be forwarded but their content cannot be altered
109 *
110 * @param method Method to be decided.
111 *
112 * @return Return 1 if the method is immutable on forward.
113 * Otherwise return 0.
114 */
115static inline int method_is_immutable(unative_t method)
116{
117 switch (method) {
118 case IPC_M_SHARE_OUT:
119 case IPC_M_SHARE_IN:
120 case IPC_M_DATA_WRITE:
121 case IPC_M_DATA_READ:
122 return 1;
123 break;
124 default:
125 return 0;
126 }
127}
128
129
130/***********************************************************************
131 * Functions that preprocess answer before sending it to the recepient.
132 ***********************************************************************/
133
134/** Decide if the caller (e.g. ipc_answer()) should save the old call contents
135 * for answer_preprocess().
136 *
137 * @param call Call structure to be decided.
138 *
139 * @return Return 1 if the old call contents should be saved.
140 * Return 0 otherwise.
141 */
142static inline int answer_need_old(call_t *call)
143{
144 switch (IPC_GET_METHOD(call->data)) {
145 case IPC_M_CONNECTION_CLONE:
146 case IPC_M_CONNECT_ME:
147 case IPC_M_CONNECT_TO_ME:
148 case IPC_M_CONNECT_ME_TO:
149 case IPC_M_SHARE_OUT:
150 case IPC_M_SHARE_IN:
151 case IPC_M_DATA_WRITE:
152 case IPC_M_DATA_READ:
153 return 1;
154 default:
155 return 0;
156 }
157}
158
159/** Interpret process answer as control information.
160 *
161 * This function is called directly after sys_ipc_answer().
162 *
163 * @param answer Call structure with the answer.
164 * @param olddata Saved data of the request.
165 *
166 * @return Return 0 on success or an error code.
167 */
168static inline int answer_preprocess(call_t *answer, ipc_data_t *olddata)
169{
170 int phoneid;
171
172 if ((native_t) IPC_GET_RETVAL(answer->data) == EHANGUP) {
173 /* In case of forward, hangup the forwared phone,
174 * not the originator
175 */
176 mutex_lock(&answer->data.phone->lock);
177 spinlock_lock(&TASK->answerbox.lock);
178 if (answer->data.phone->state == IPC_PHONE_CONNECTED) {
179 list_remove(&answer->data.phone->link);
180 answer->data.phone->state = IPC_PHONE_SLAMMED;
181 }
182 spinlock_unlock(&TASK->answerbox.lock);
183 mutex_unlock(&answer->data.phone->lock);
184 }
185
186 if (!olddata)
187 return 0;
188
189 if (IPC_GET_METHOD(*olddata) == IPC_M_CONNECTION_CLONE) {
190 phoneid = IPC_GET_ARG1(*olddata);
191 phone_t *phone = &TASK->phones[phoneid];
192 if (IPC_GET_RETVAL(answer->data) != EOK) {
193 /*
194 * The recipient of the cloned phone rejected the offer.
195 * In this case, the connection was established at the
196 * request time and therefore we need to slam the phone.
197 * We don't merely hangup as that would result in
198 * sending IPC_M_HUNGUP to the third party on the
199 * other side of the cloned phone.
200 */
201 mutex_lock(&phone->lock);
202 if (phone->state == IPC_PHONE_CONNECTED) {
203 spinlock_lock(&phone->callee->lock);
204 list_remove(&phone->link);
205 phone->state = IPC_PHONE_SLAMMED;
206 spinlock_unlock(&phone->callee->lock);
207 }
208 mutex_unlock(&phone->lock);
209 }
210 } else if (IPC_GET_METHOD(*olddata) == IPC_M_CONNECT_ME) {
211 phone_t *phone = (phone_t *)IPC_GET_ARG5(*olddata);
212 if (IPC_GET_RETVAL(answer->data) != EOK) {
213 /*
214 * The other party on the cloned phoned rejected our
215 * request for connection on the protocol level.
216 * We need to break the connection without sending
217 * IPC_M_HUNGUP back.
218 */
219 mutex_lock(&phone->lock);
220 if (phone->state == IPC_PHONE_CONNECTED) {
221 spinlock_lock(&phone->callee->lock);
222 list_remove(&phone->link);
223 phone->state = IPC_PHONE_SLAMMED;
224 spinlock_unlock(&phone->callee->lock);
225 }
226 mutex_unlock(&phone->lock);
227 }
228 } else if (IPC_GET_METHOD(*olddata) == IPC_M_CONNECT_TO_ME) {
229 phoneid = IPC_GET_ARG5(*olddata);
230 if (IPC_GET_RETVAL(answer->data) != EOK) {
231 /* The connection was not accepted */
232 phone_dealloc(phoneid);
233 } else {
234 /* The connection was accepted */
235 phone_connect(phoneid, &answer->sender->answerbox);
236 /* Set 'phone hash' as arg5 of response */
237 IPC_SET_ARG5(answer->data,
238 (unative_t) &TASK->phones[phoneid]);
239 }
240 } else if (IPC_GET_METHOD(*olddata) == IPC_M_CONNECT_ME_TO) {
241 /* If the users accepted call, connect */
242 if (IPC_GET_RETVAL(answer->data) == EOK) {
243 ipc_phone_connect((phone_t *) IPC_GET_ARG5(*olddata),
244 &TASK->answerbox);
245 }
246 } else if (IPC_GET_METHOD(*olddata) == IPC_M_SHARE_OUT) {
247 if (!IPC_GET_RETVAL(answer->data)) {
248 /* Accepted, handle as_area receipt */
249 ipl_t ipl;
250 int rc;
251 as_t *as;
252
253 ipl = interrupts_disable();
254 spinlock_lock(&answer->sender->lock);
255 as = answer->sender->as;
256 spinlock_unlock(&answer->sender->lock);
257 interrupts_restore(ipl);
258
259 rc = as_area_share(as, IPC_GET_ARG1(*olddata),
260 IPC_GET_ARG2(*olddata), AS,
261 IPC_GET_ARG1(answer->data), IPC_GET_ARG3(*olddata));
262 IPC_SET_RETVAL(answer->data, rc);
263 return rc;
264 }
265 } else if (IPC_GET_METHOD(*olddata) == IPC_M_SHARE_IN) {
266 if (!IPC_GET_RETVAL(answer->data)) {
267 ipl_t ipl;
268 as_t *as;
269 int rc;
270
271 ipl = interrupts_disable();
272 spinlock_lock(&answer->sender->lock);
273 as = answer->sender->as;
274 spinlock_unlock(&answer->sender->lock);
275 interrupts_restore(ipl);
276
277 rc = as_area_share(AS, IPC_GET_ARG1(answer->data),
278 IPC_GET_ARG2(*olddata), as, IPC_GET_ARG1(*olddata),
279 IPC_GET_ARG2(answer->data));
280 IPC_SET_RETVAL(answer->data, rc);
281 }
282 } else if (IPC_GET_METHOD(*olddata) == IPC_M_DATA_READ) {
283 ASSERT(!answer->buffer);
284 if (!IPC_GET_RETVAL(answer->data)) {
285 /* The recipient agreed to send data. */
286 uintptr_t src = IPC_GET_ARG1(answer->data);
287 uintptr_t dst = IPC_GET_ARG1(*olddata);
288 size_t max_size = IPC_GET_ARG2(*olddata);
289 size_t size = IPC_GET_ARG2(answer->data);
290 if (size && size <= max_size) {
291 /*
292 * Copy the destination VA so that this piece of
293 * information is not lost.
294 */
295 IPC_SET_ARG1(answer->data, dst);
296
297 answer->buffer = malloc(size, 0);
298 int rc = copy_from_uspace(answer->buffer,
299 (void *) src, size);
300 if (rc) {
301 IPC_SET_RETVAL(answer->data, rc);
302 free(answer->buffer);
303 answer->buffer = NULL;
304 }
305 } else if (!size) {
306 IPC_SET_RETVAL(answer->data, EOK);
307 } else {
308 IPC_SET_RETVAL(answer->data, ELIMIT);
309 }
310 }
311 } else if (IPC_GET_METHOD(*olddata) == IPC_M_DATA_WRITE) {
312 ASSERT(answer->buffer);
313 if (!IPC_GET_RETVAL(answer->data)) {
314 /* The recipient agreed to receive data. */
315 int rc;
316 uintptr_t dst;
317 size_t size;
318 size_t max_size;
319
320 dst = (uintptr_t)IPC_GET_ARG1(answer->data);
321 size = (size_t)IPC_GET_ARG2(answer->data);
322 max_size = (size_t)IPC_GET_ARG2(*olddata);
323
324 if (size <= max_size) {
325 rc = copy_to_uspace((void *) dst,
326 answer->buffer, size);
327 if (rc)
328 IPC_SET_RETVAL(answer->data, rc);
329 } else {
330 IPC_SET_RETVAL(answer->data, ELIMIT);
331 }
332 }
333 free(answer->buffer);
334 answer->buffer = NULL;
335 }
336 return 0;
337}
338
339/** Called before the request is sent.
340 *
341 * @param call Call structure with the request.
342 * @param phone Phone that the call will be sent through.
343 *
344 * @return Return 0 on success, ELIMIT or EPERM on error.
345 */
346static int request_preprocess(call_t *call, phone_t *phone)
347{
348 int newphid;
349 size_t size;
350 uintptr_t src;
351 int rc;
352
353 switch (IPC_GET_METHOD(call->data)) {
354 case IPC_M_CONNECTION_CLONE: {
355 phone_t *cloned_phone;
356 GET_CHECK_PHONE(cloned_phone, IPC_GET_ARG1(call->data),
357 return ENOENT);
358 if (cloned_phone < phone) {
359 mutex_lock(&cloned_phone->lock);
360 mutex_lock(&phone->lock);
361 } else if (cloned_phone > phone) {
362 mutex_lock(&phone->lock);
363 mutex_lock(&cloned_phone->lock);
364 } else {
365 mutex_lock(&phone->lock);
366 }
367 if ((cloned_phone->state != IPC_PHONE_CONNECTED) ||
368 phone->state != IPC_PHONE_CONNECTED) {
369 if (cloned_phone != phone)
370 mutex_unlock(&cloned_phone->lock);
371 mutex_unlock(&phone->lock);
372 return EINVAL;
373 }
374 /*
375 * We can be pretty sure now that both tasks exist and we are
376 * connected to them. As we continue to hold the phone locks,
377 * we are effectively preventing them from finishing their
378 * potential cleanup.
379 */
380 newphid = phone_alloc(phone->callee->task);
381 if (newphid < 0) {
382 if (cloned_phone != phone)
383 mutex_unlock(&cloned_phone->lock);
384 mutex_unlock(&phone->lock);
385 return ELIMIT;
386 }
387 ipc_phone_connect(&phone->callee->task->phones[newphid],
388 cloned_phone->callee);
389 if (cloned_phone != phone)
390 mutex_unlock(&cloned_phone->lock);
391 mutex_unlock(&phone->lock);
392 /* Set the new phone for the callee. */
393 IPC_SET_ARG1(call->data, newphid);
394 break;
395 }
396 case IPC_M_CONNECT_ME:
397 IPC_SET_ARG5(call->data, (unative_t) phone);
398 break;
399 case IPC_M_CONNECT_ME_TO:
400 newphid = phone_alloc(TASK);
401 if (newphid < 0)
402 return ELIMIT;
403 /* Set arg5 for server */
404 IPC_SET_ARG5(call->data, (unative_t) &TASK->phones[newphid]);
405 call->flags |= IPC_CALL_CONN_ME_TO;
406 call->priv = newphid;
407 break;
408 case IPC_M_SHARE_OUT:
409 size = as_area_get_size(IPC_GET_ARG1(call->data));
410 if (!size)
411 return EPERM;
412 IPC_SET_ARG2(call->data, size);
413 break;
414 case IPC_M_DATA_READ:
415 size = IPC_GET_ARG2(call->data);
416 if ((size <= 0 || (size > DATA_XFER_LIMIT)))
417 return ELIMIT;
418 break;
419 case IPC_M_DATA_WRITE:
420 src = IPC_GET_ARG1(call->data);
421 size = IPC_GET_ARG2(call->data);
422
423 if (size > DATA_XFER_LIMIT)
424 return ELIMIT;
425
426 call->buffer = (uint8_t *) malloc(size, 0);
427 rc = copy_from_uspace(call->buffer, (void *) src, size);
428 if (rc != 0) {
429 free(call->buffer);
430 return rc;
431 }
432 break;
433#ifdef CONFIG_UDEBUG
434 case IPC_M_DEBUG_ALL:
435 return udebug_request_preprocess(call, phone);
436#endif
437 default:
438 break;
439 }
440 return 0;
441}
442
443/*******************************************************************************
444 * Functions called to process received call/answer before passing it to uspace.
445 *******************************************************************************/
446
447/** Do basic kernel processing of received call answer.
448 *
449 * @param call Call structure with the answer.
450 */
451static void process_answer(call_t *call)
452{
453 if (((native_t) IPC_GET_RETVAL(call->data) == EHANGUP) &&
454 (call->flags & IPC_CALL_FORWARDED))
455 IPC_SET_RETVAL(call->data, EFORWARD);
456
457 if (call->flags & IPC_CALL_CONN_ME_TO) {
458 if (IPC_GET_RETVAL(call->data))
459 phone_dealloc(call->priv);
460 else
461 IPC_SET_ARG5(call->data, call->priv);
462 }
463
464 if (call->buffer) {
465 /* This must be an affirmative answer to IPC_M_DATA_READ. */
466 /* or IPC_M_DEBUG_ALL/UDEBUG_M_MEM_READ... */
467 uintptr_t dst = IPC_GET_ARG1(call->data);
468 size_t size = IPC_GET_ARG2(call->data);
469 int rc = copy_to_uspace((void *) dst, call->buffer, size);
470 if (rc)
471 IPC_SET_RETVAL(call->data, rc);
472 free(call->buffer);
473 call->buffer = NULL;
474 }
475}
476
477/** Do basic kernel processing of received call request.
478 *
479 * @param box Destination answerbox structure.
480 * @param call Call structure with the request.
481 *
482 * @return Return 0 if the call should be passed to userspace.
483 * Return -1 if the call should be ignored.
484 */
485static int process_request(answerbox_t *box, call_t *call)
486{
487 int phoneid;
488
489 if (IPC_GET_METHOD(call->data) == IPC_M_CONNECT_TO_ME) {
490 phoneid = phone_alloc(TASK);
491 if (phoneid < 0) { /* Failed to allocate phone */
492 IPC_SET_RETVAL(call->data, ELIMIT);
493 ipc_answer(box, call);
494 return -1;
495 }
496 IPC_SET_ARG5(call->data, phoneid);
497 }
498 switch (IPC_GET_METHOD(call->data)) {
499 case IPC_M_DEBUG_ALL:
500 return -1;
501 default:
502 break;
503 }
504 return 0;
505}
506
507/** Make a fast call over IPC, wait for reply and return to user.
508 *
509 * This function can handle only three arguments of payload, but is faster than
510 * the generic function (i.e. sys_ipc_call_sync_slow()).
511 *
512 * @param phoneid Phone handle for the call.
513 * @param method Method of the call.
514 * @param arg1 Service-defined payload argument.
515 * @param arg2 Service-defined payload argument.
516 * @param arg3 Service-defined payload argument.
517 * @param data Address of userspace structure where the reply call will
518 * be stored.
519 *
520 * @return Returns 0 on success.
521 * Return ENOENT if there is no such phone handle.
522 */
523unative_t sys_ipc_call_sync_fast(unative_t phoneid, unative_t method,
524 unative_t arg1, unative_t arg2, unative_t arg3, ipc_data_t *data)
525{
526 call_t call;
527 phone_t *phone;
528 int res;
529 int rc;
530
531 GET_CHECK_PHONE(phone, phoneid, return ENOENT);
532
533 ipc_call_static_init(&call);
534 IPC_SET_METHOD(call.data, method);
535 IPC_SET_ARG1(call.data, arg1);
536 IPC_SET_ARG2(call.data, arg2);
537 IPC_SET_ARG3(call.data, arg3);
538 /*
539 * To achieve deterministic behavior, zero out arguments that are beyond
540 * the limits of the fast version.
541 */
542 IPC_SET_ARG4(call.data, 0);
543 IPC_SET_ARG5(call.data, 0);
544
545 if (!(res = request_preprocess(&call, phone))) {
546#ifdef CONFIG_UDEBUG
547 udebug_stoppable_begin();
548#endif
549 rc = ipc_call_sync(phone, &call);
550#ifdef CONFIG_UDEBUG
551 udebug_stoppable_end();
552#endif
553 if (rc != EOK)
554 return rc;
555 process_answer(&call);
556
557 } else {
558 IPC_SET_RETVAL(call.data, res);
559 }
560 rc = STRUCT_TO_USPACE(&data->args, &call.data.args);
561 if (rc != 0)
562 return rc;
563
564 return 0;
565}
566
567/** Make a synchronous IPC call allowing to transmit the entire payload.
568 *
569 * @param phoneid Phone handle for the call.
570 * @param question Userspace address of call data with the request.
571 * @param reply Userspace address of call data where to store the
572 * answer.
573 *
574 * @return Zero on success or an error code.
575 */
576unative_t sys_ipc_call_sync_slow(unative_t phoneid, ipc_data_t *question,
577 ipc_data_t *reply)
578{
579 call_t call;
580 phone_t *phone;
581 int res;
582 int rc;
583
584 ipc_call_static_init(&call);
585 rc = copy_from_uspace(&call.data.args, &question->args,
586 sizeof(call.data.args));
587 if (rc != 0)
588 return (unative_t) rc;
589
590 GET_CHECK_PHONE(phone, phoneid, return ENOENT);
591
592 if (!(res = request_preprocess(&call, phone))) {
593#ifdef CONFIG_UDEBUG
594 udebug_stoppable_begin();
595#endif
596 rc = ipc_call_sync(phone, &call);
597#ifdef CONFIG_UDEBUG
598 udebug_stoppable_end();
599#endif
600 if (rc != EOK)
601 return rc;
602 process_answer(&call);
603 } else
604 IPC_SET_RETVAL(call.data, res);
605
606 rc = STRUCT_TO_USPACE(&reply->args, &call.data.args);
607 if (rc != 0)
608 return rc;
609
610 return 0;
611}
612
613/** Check that the task did not exceed the allowed limit of asynchronous calls.
614 *
615 * @return Return 0 if limit not reached or -1 if limit exceeded.
616 */
617static int check_call_limit(void)
618{
619 if (atomic_preinc(&TASK->active_calls) > IPC_MAX_ASYNC_CALLS) {
620 atomic_dec(&TASK->active_calls);
621 return -1;
622 }
623 return 0;
624}
625
626/** Make a fast asynchronous call over IPC.
627 *
628 * This function can only handle four arguments of payload, but is faster than
629 * the generic function sys_ipc_call_async_slow().
630 *
631 * @param phoneid Phone handle for the call.
632 * @param method Method of the call.
633 * @param arg1 Service-defined payload argument.
634 * @param arg2 Service-defined payload argument.
635 * @param arg3 Service-defined payload argument.
636 * @param arg4 Service-defined payload argument.
637 *
638 * @return Return call hash on success.
639 * Return IPC_CALLRET_FATAL in case of a fatal error and
640 * IPC_CALLRET_TEMPORARY if there are too many pending
641 * asynchronous requests; answers should be handled first.
642 */
643unative_t sys_ipc_call_async_fast(unative_t phoneid, unative_t method,
644 unative_t arg1, unative_t arg2, unative_t arg3, unative_t arg4)
645{
646 call_t *call;
647 phone_t *phone;
648 int res;
649
650 if (check_call_limit())
651 return IPC_CALLRET_TEMPORARY;
652
653 GET_CHECK_PHONE(phone, phoneid, return IPC_CALLRET_FATAL);
654
655 call = ipc_call_alloc(0);
656 IPC_SET_METHOD(call->data, method);
657 IPC_SET_ARG1(call->data, arg1);
658 IPC_SET_ARG2(call->data, arg2);
659 IPC_SET_ARG3(call->data, arg3);
660 IPC_SET_ARG4(call->data, arg4);
661 /*
662 * To achieve deterministic behavior, zero out arguments that are beyond
663 * the limits of the fast version.
664 */
665 IPC_SET_ARG5(call->data, 0);
666
667 if (!(res = request_preprocess(call, phone)))
668 ipc_call(phone, call);
669 else
670 ipc_backsend_err(phone, call, res);
671
672 return (unative_t) call;
673}
674
675/** Make an asynchronous IPC call allowing to transmit the entire payload.
676 *
677 * @param phoneid Phone handle for the call.
678 * @param data Userspace address of call data with the request.
679 *
680 * @return See sys_ipc_call_async_fast().
681 */
682unative_t sys_ipc_call_async_slow(unative_t phoneid, ipc_data_t *data)
683{
684 call_t *call;
685 phone_t *phone;
686 int res;
687 int rc;
688
689 if (check_call_limit())
690 return IPC_CALLRET_TEMPORARY;
691
692 GET_CHECK_PHONE(phone, phoneid, return IPC_CALLRET_FATAL);
693
694 call = ipc_call_alloc(0);
695 rc = copy_from_uspace(&call->data.args, &data->args,
696 sizeof(call->data.args));
697 if (rc != 0) {
698 ipc_call_free(call);
699 return (unative_t) rc;
700 }
701 if (!(res = request_preprocess(call, phone)))
702 ipc_call(phone, call);
703 else
704 ipc_backsend_err(phone, call, res);
705
706 return (unative_t) call;
707}
708
709/** Forward a received call to another destination - common code for both the
710 * fast and the slow version.
711 *
712 * @param callid Hash of the call to forward.
713 * @param phoneid Phone handle to use for forwarding.
714 * @param method New method to use for the forwarded call.
715 * @param arg1 New value of the first argument for the forwarded call.
716 * @param arg2 New value of the second argument for the forwarded call.
717 * @param arg3 New value of the third argument for the forwarded call.
718 * @param arg4 New value of the fourth argument for the forwarded call.
719 * @param arg5 New value of the fifth argument for the forwarded call.
720 * @param mode Flags that specify mode of the forward operation.
721 * @param slow If true, arg3, arg4 and arg5 are considered. Otherwise
722 * the function considers only the fast version arguments:
723 * i.e. arg1 and arg2.
724 *
725 * @return Return 0 on succes, otherwise return an error code.
726 *
727 * Warning: Make sure that ARG5 is not rewritten for certain system IPC
728 */
729static unative_t sys_ipc_forward_common(unative_t callid, unative_t phoneid,
730 unative_t method, unative_t arg1, unative_t arg2, unative_t arg3,
731 unative_t arg4, unative_t arg5, int mode, bool slow)
732{
733 call_t *call;
734 phone_t *phone;
735
736 call = get_call(callid);
737 if (!call)
738 return ENOENT;
739
740 call->flags |= IPC_CALL_FORWARDED;
741
742 GET_CHECK_PHONE(phone, phoneid, {
743 IPC_SET_RETVAL(call->data, EFORWARD);
744 ipc_answer(&TASK->answerbox, call);
745 return ENOENT;
746 });
747
748 if (!method_is_forwardable(IPC_GET_METHOD(call->data))) {
749 IPC_SET_RETVAL(call->data, EFORWARD);
750 ipc_answer(&TASK->answerbox, call);
751 return EPERM;
752 }
753
754 /*
755 * Userspace is not allowed to change method of system methods on
756 * forward, allow changing ARG1, ARG2, ARG3 and ARG4 by means of method,
757 * arg1, arg2 and arg3.
758 * If the method is immutable, don't change anything.
759 */
760 if (!method_is_immutable(IPC_GET_METHOD(call->data))) {
761 if (method_is_system(IPC_GET_METHOD(call->data))) {
762 if (IPC_GET_METHOD(call->data) == IPC_M_CONNECT_TO_ME)
763 phone_dealloc(IPC_GET_ARG5(call->data));
764
765 IPC_SET_ARG1(call->data, method);
766 IPC_SET_ARG2(call->data, arg1);
767 IPC_SET_ARG3(call->data, arg2);
768 if (slow) {
769 IPC_SET_ARG4(call->data, arg3);
770 /*
771 * For system methods we deliberately don't
772 * overwrite ARG5.
773 */
774 }
775 } else {
776 IPC_SET_METHOD(call->data, method);
777 IPC_SET_ARG1(call->data, arg1);
778 IPC_SET_ARG2(call->data, arg2);
779 if (slow) {
780 IPC_SET_ARG3(call->data, arg3);
781 IPC_SET_ARG4(call->data, arg4);
782 IPC_SET_ARG5(call->data, arg5);
783 }
784 }
785 }
786
787 return ipc_forward(call, phone, &TASK->answerbox, mode);
788}
789
790/** Forward a received call to another destination - fast version.
791 *
792 * @param callid Hash of the call to forward.
793 * @param phoneid Phone handle to use for forwarding.
794 * @param method New method to use for the forwarded call.
795 * @param arg1 New value of the first argument for the forwarded call.
796 * @param arg2 New value of the second argument for the forwarded call.
797 * @param mode Flags that specify mode of the forward operation.
798 *
799 * @return Return 0 on succes, otherwise return an error code.
800 *
801 * In case the original method is a system method, ARG1, ARG2 and ARG3 are
802 * overwritten in the forwarded message with the new method and the new
803 * arg1 and arg2, respectively. Otherwise the METHOD, ARG1 and ARG2 are
804 * rewritten with the new method, arg1 and arg2, respectively. Also note there
805 * is a set of immutable methods, for which the new method and arguments are not
806 * set and these values are ignored.
807 */
808unative_t sys_ipc_forward_fast(unative_t callid, unative_t phoneid,
809 unative_t method, unative_t arg1, unative_t arg2, int mode)
810{
811 return sys_ipc_forward_common(callid, phoneid, method, arg1, arg2, 0, 0,
812 0, mode, false);
813}
814
815/** Forward a received call to another destination - slow version.
816 *
817 * @param callid Hash of the call to forward.
818 * @param phoneid Phone handle to use for forwarding.
819 * @param data Userspace address of the new IPC data.
820 * @param mode Flags that specify mode of the forward operation.
821 *
822 * @return Return 0 on succes, otherwise return an error code.
823 *
824 * This function is the slow verision of the sys_ipc_forward_fast interface.
825 * It can copy all five new arguments and the new method from the userspace.
826 * It naturally extends the functionality of the fast version. For system
827 * methods, it additionally stores the new value of arg3 to ARG4. For non-system
828 * methods, it additionally stores the new value of arg3, arg4 and arg5,
829 * respectively, to ARG3, ARG4 and ARG5, respectively.
830 */
831unative_t sys_ipc_forward_slow(unative_t callid, unative_t phoneid,
832 ipc_data_t *data, int mode)
833{
834 ipc_data_t newdata;
835 int rc;
836
837 rc = copy_from_uspace(&newdata.args, &data->args,
838 sizeof(newdata.args));
839 if (rc != 0)
840 return (unative_t) rc;
841
842 return sys_ipc_forward_common(callid, phoneid,
843 IPC_GET_METHOD(newdata), IPC_GET_ARG1(newdata),
844 IPC_GET_ARG2(newdata), IPC_GET_ARG3(newdata),
845 IPC_GET_ARG4(newdata), IPC_GET_ARG5(newdata), mode, true);
846}
847
848/** Answer an IPC call - fast version.
849 *
850 * This function can handle only two return arguments of payload, but is faster
851 * than the generic sys_ipc_answer().
852 *
853 * @param callid Hash of the call to be answered.
854 * @param retval Return value of the answer.
855 * @param arg1 Service-defined return value.
856 * @param arg2 Service-defined return value.
857 * @param arg3 Service-defined return value.
858 * @param arg4 Service-defined return value.
859 *
860 * @return Return 0 on success, otherwise return an error code.
861 */
862unative_t sys_ipc_answer_fast(unative_t callid, unative_t retval,
863 unative_t arg1, unative_t arg2, unative_t arg3, unative_t arg4)
864{
865 call_t *call;
866 ipc_data_t saved_data;
867 int saveddata = 0;
868 int rc;
869
870 /* Do not answer notification callids */
871 if (callid & IPC_CALLID_NOTIFICATION)
872 return 0;
873
874 call = get_call(callid);
875 if (!call)
876 return ENOENT;
877
878 if (answer_need_old(call)) {
879 memcpy(&saved_data, &call->data, sizeof(call->data));
880 saveddata = 1;
881 }
882
883 IPC_SET_RETVAL(call->data, retval);
884 IPC_SET_ARG1(call->data, arg1);
885 IPC_SET_ARG2(call->data, arg2);
886 IPC_SET_ARG3(call->data, arg3);
887 IPC_SET_ARG4(call->data, arg4);
888 /*
889 * To achieve deterministic behavior, zero out arguments that are beyond
890 * the limits of the fast version.
891 */
892 IPC_SET_ARG5(call->data, 0);
893 rc = answer_preprocess(call, saveddata ? &saved_data : NULL);
894
895 ipc_answer(&TASK->answerbox, call);
896 return rc;
897}
898
899/** Answer an IPC call.
900 *
901 * @param callid Hash of the call to be answered.
902 * @param data Userspace address of call data with the answer.
903 *
904 * @return Return 0 on success, otherwise return an error code.
905 */
906unative_t sys_ipc_answer_slow(unative_t callid, ipc_data_t *data)
907{
908 call_t *call;
909 ipc_data_t saved_data;
910 int saveddata = 0;
911 int rc;
912
913 /* Do not answer notification callids */
914 if (callid & IPC_CALLID_NOTIFICATION)
915 return 0;
916
917 call = get_call(callid);
918 if (!call)
919 return ENOENT;
920
921 if (answer_need_old(call)) {
922 memcpy(&saved_data, &call->data, sizeof(call->data));
923 saveddata = 1;
924 }
925 rc = copy_from_uspace(&call->data.args, &data->args,
926 sizeof(call->data.args));
927 if (rc != 0)
928 return rc;
929
930 rc = answer_preprocess(call, saveddata ? &saved_data : NULL);
931
932 ipc_answer(&TASK->answerbox, call);
933
934 return rc;
935}
936
937/** Hang up a phone.
938 *
939 * @param Phone handle of the phone to be hung up.
940 *
941 * @return Return 0 on success or an error code.
942 */
943unative_t sys_ipc_hangup(int phoneid)
944{
945 phone_t *phone;
946
947 GET_CHECK_PHONE(phone, phoneid, return ENOENT);
948
949 if (ipc_phone_hangup(phone))
950 return -1;
951
952 return 0;
953}
954
955/** Wait for an incoming IPC call or an answer.
956 *
957 * @param calldata Pointer to buffer where the call/answer data is stored.
958 * @param usec Timeout. See waitq_sleep_timeout() for explanation.
959 * @param flags Select mode of sleep operation. See waitq_sleep_timeout()
960 * for explanation.
961 *
962 * @return Hash of the call.
963 * If IPC_CALLID_NOTIFICATION bit is set in the hash, the
964 * call is a notification. IPC_CALLID_ANSWERED denotes an
965 * answer.
966 */
967unative_t sys_ipc_wait_for_call(ipc_data_t *calldata, uint32_t usec, int flags)
968{
969 call_t *call;
970
971restart:
972
973#ifdef CONFIG_UDEBUG
974 udebug_stoppable_begin();
975#endif
976 call = ipc_wait_for_call(&TASK->answerbox, usec,
977 flags | SYNCH_FLAGS_INTERRUPTIBLE);
978
979#ifdef CONFIG_UDEBUG
980 udebug_stoppable_end();
981#endif
982 if (!call)
983 return 0;
984
985 if (call->flags & IPC_CALL_NOTIF) {
986 ASSERT(! (call->flags & IPC_CALL_STATIC_ALLOC));
987
988 /* Set in_phone_hash to the interrupt counter */
989 call->data.phone = (void *) call->priv;
990
991 STRUCT_TO_USPACE(calldata, &call->data);
992
993 ipc_call_free(call);
994
995 return ((unative_t) call) | IPC_CALLID_NOTIFICATION;
996 }
997
998 if (call->flags & IPC_CALL_ANSWERED) {
999 process_answer(call);
1000
1001 ASSERT(! (call->flags & IPC_CALL_STATIC_ALLOC));
1002
1003 if (call->flags & IPC_CALL_DISCARD_ANSWER) {
1004 ipc_call_free(call);
1005 goto restart;
1006 } else {
1007 /*
1008 * Decrement the counter of active calls only if the
1009 * call is not an answer to IPC_M_PHONE_HUNGUP,
1010 * which doesn't contribute to the counter.
1011 */
1012 atomic_dec(&TASK->active_calls);
1013 }
1014
1015 STRUCT_TO_USPACE(&calldata->args, &call->data.args);
1016 ipc_call_free(call);
1017
1018 return ((unative_t) call) | IPC_CALLID_ANSWERED;
1019 }
1020
1021 if (process_request(&TASK->answerbox, call))
1022 goto restart;
1023
1024 /* Include phone address('id') of the caller in the request,
1025 * copy whole call->data, not only call->data.args */
1026 if (STRUCT_TO_USPACE(calldata, &call->data)) {
1027 /*
1028 * The callee will not receive this call and no one else has
1029 * a chance to answer it. Reply with the EPARTY error code.
1030 */
1031 ipc_data_t saved_data;
1032 int saveddata = 0;
1033
1034 if (answer_need_old(call)) {
1035 memcpy(&saved_data, &call->data, sizeof(call->data));
1036 saveddata = 1;
1037 }
1038
1039 IPC_SET_RETVAL(call->data, EPARTY);
1040 (void) answer_preprocess(call, saveddata ? &saved_data : NULL);
1041 ipc_answer(&TASK->answerbox, call);
1042 return 0;
1043 }
1044 return (unative_t)call;
1045}
1046
1047/** Connect an IRQ handler to a task.
1048 *
1049 * @param inr IRQ number.
1050 * @param devno Device number.
1051 * @param method Method to be associated with the notification.
1052 * @param ucode Uspace pointer to the top-half pseudocode.
1053 *
1054 * @return EPERM or a return code returned by ipc_irq_register().
1055 */
1056unative_t sys_ipc_register_irq(inr_t inr, devno_t devno, unative_t method,
1057 irq_code_t *ucode)
1058{
1059 if (!(cap_get(TASK) & CAP_IRQ_REG))
1060 return EPERM;
1061
1062 return ipc_irq_register(&TASK->answerbox, inr, devno, method, ucode);
1063}
1064
1065/** Disconnect an IRQ handler from a task.
1066 *
1067 * @param inr IRQ number.
1068 * @param devno Device number.
1069 *
1070 * @return Zero on success or EPERM on error..
1071 */
1072unative_t sys_ipc_unregister_irq(inr_t inr, devno_t devno)
1073{
1074 if (!(cap_get(TASK) & CAP_IRQ_REG))
1075 return EPERM;
1076
1077 ipc_irq_unregister(&TASK->answerbox, inr, devno);
1078
1079 return 0;
1080}
1081
1082#include <console/console.h>
1083
1084/**
1085 * Syscall connect to a task by id.
1086 *
1087 * @return Phone id on success, or negative error code.
1088 */
1089unative_t sys_ipc_connect_kbox(sysarg64_t *uspace_taskid_arg)
1090{
1091#ifdef CONFIG_UDEBUG
1092 sysarg64_t taskid_arg;
1093 int rc;
1094
1095 rc = copy_from_uspace(&taskid_arg, uspace_taskid_arg, sizeof(sysarg64_t));
1096 if (rc != 0)
1097 return (unative_t) rc;
1098
1099 LOG("sys_ipc_connect_kbox(%" PRIu64 ")\n", taskid_arg.value);
1100
1101 return ipc_connect_kbox(taskid_arg.value);
1102#else
1103 return (unative_t) ENOTSUP;
1104#endif
1105}
1106
1107/** @}
1108 */
Note: See TracBrowser for help on using the repository browser.