source: mainline/kernel/generic/src/ipc/ipcrsc.c@ 9fc776c7

lfn serial ticket/834-toolchain-update topic/msim-upgrade topic/simplify-dev-export
Last change on this file since 9fc776c7 was 9fc776c7, checked in by Jakub Jermar <jakub@…>, 7 years ago

Remove support for capability reclaiming

  • Property mode set to 100644
File size: 7.3 KB
Line 
1/*
2 * Copyright (c) 2006 Ondrej Palkovsky
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 *
9 * - Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * - Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * - The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 */
28
29/** @addtogroup genericipc
30 * @{
31 */
32/** @file
33 */
34
35/* IPC resources management
36 *
37 * The goal of this source code is to properly manage IPC resources and allow
38 * straight and clean clean-up procedure upon task termination.
39 *
40 * The pattern of usage of the resources is:
41 * - allocate empty phone capability slot, connect | deallocate slot
42 * - disconnect connected phone (some messages might be on the fly)
43 * - find phone in slot and send a message using phone
44 * - answer message to phone
45 * - hangup phone (the caller has hung up)
46 * - hangup phone (the answerbox is exiting)
47 *
48 * Locking strategy
49 *
50 * - To use a phone, disconnect a phone etc., the phone must be first locked and
51 * then checked that it is connected
52 * - To connect an allocated phone it need not be locked (assigning pointer is
53 * atomic on all platforms)
54 *
55 * - To find an empty phone capability slot, the TASK must be locked
56 * - To answer a message, the answerbox must be locked
57 * - The locking of phone and answerbox is done at the ipc_ level.
58 * It is perfectly correct to pass unconnected phone to these functions and
59 * proper reply will be generated.
60 *
61 * Locking order
62 *
63 * - first phone, then answerbox
64 * + Easy locking on calls
65 * - Very hard traversing list of phones when disconnecting because the phones
66 * may disconnect during traversal of list of connected phones. The only
67 * possibility is try_lock with restart of list traversal.
68 *
69 * Destroying is less frequent, this approach is taken.
70 *
71 * Phone call
72 *
73 * *** Connect_me_to ***
74 * The caller sends IPC_M_CONNECT_ME_TO to an answerbox. The server receives
75 * 'phoneid' of the connecting phone as an ARG5. If it answers with RETVAL=0,
76 * the phonecall is accepted, otherwise it is refused.
77 *
78 * *** Connect_to_me ***
79 * The caller sends IPC_M_CONNECT_TO_ME.
80 * The server receives an automatically opened phoneid. If it accepts
81 * (RETVAL=0), it can use the phoneid immediately. Possible race condition can
82 * arise, when the client receives messages from new connection before getting
83 * response for connect_to_me message. Userspace should implement handshake
84 * protocol that would control it.
85 *
86 * Phone hangup
87 *
88 * *** The caller hangs up (sys_ipc_hangup) ***
89 * - The phone is disconnected (no more messages can be sent over this phone),
90 * all in-progress messages are correctly handled. The answerbox receives
91 * IPC_M_PHONE_HUNGUP call from the phone that hung up. When all async calls
92 * are answered, the phone is deallocated.
93 *
94 * *** The answerbox hangs up (ipc_answer(EHANGUP))
95 * - The phone is disconnected. EHANGUP response code is sent to the calling
96 * task. All new calls through this phone get a EHUNGUP error code, the task
97 * is expected to send an sys_ipc_hangup after cleaning up its internal
98 * structures.
99 *
100 *
101 * Call forwarding
102 *
103 * The call can be forwarded, so that the answer to call is passed directly to
104 * the original sender. However, this poses special problems regarding routing
105 * of hangup messages.
106 *
107 * sys_ipc_hangup -> IPC_M_PHONE_HUNGUP
108 * - this message CANNOT be forwarded
109 *
110 * EHANGUP during forward
111 * - The *forwarding* phone will be closed, EFORWARD is sent to receiver.
112 *
113 * EHANGUP, ENOENT during forward
114 * - EFORWARD is sent to the receiver, ipc_forward returns error code EFORWARD
115 *
116 * Cleanup strategy
117 *
118 * 1) Disconnect all our phones ('ipc_phone_hangup').
119 *
120 * 2) Disconnect all phones connected to answerbox.
121 *
122 * 3) Answer all messages in 'calls' and 'dispatched_calls' queues with
123 * appropriate error code (EHANGUP, EFORWARD).
124 *
125 * 4) Wait for all async answers to arrive and dispose of them.
126 *
127 */
128
129#include <synch/spinlock.h>
130#include <ipc/ipc.h>
131#include <arch.h>
132#include <proc/task.h>
133#include <ipc/ipcrsc.h>
134#include <assert.h>
135#include <abi/errno.h>
136#include <cap/cap.h>
137#include <mm/slab.h>
138
139static void phone_destroy(void *arg)
140{
141 phone_t *phone = (phone_t *) arg;
142 slab_free(phone_cache, phone);
143}
144
145static kobject_ops_t phone_kobject_ops = {
146 .destroy = phone_destroy
147};
148
149
150/** Allocate new phone in the specified task.
151 *
152 * @param task Task for which to allocate a new phone.
153 *
154 * @param[out] out_handle New phone capability handle.
155 *
156 * @return An error code if a new capability cannot be allocated.
157 */
158errno_t phone_alloc(task_t *task, cap_handle_t *out_handle)
159{
160 cap_handle_t handle;
161 errno_t rc = cap_alloc(task, &handle);
162 if (rc == EOK) {
163 phone_t *phone = slab_alloc(phone_cache, FRAME_ATOMIC);
164 if (!phone) {
165 cap_free(TASK, handle);
166 return ENOMEM;
167 }
168 kobject_t *kobject = malloc(sizeof(kobject_t), FRAME_ATOMIC);
169 if (!kobject) {
170 cap_free(TASK, handle);
171 slab_free(phone_cache, phone);
172 return ENOMEM;
173 }
174
175 ipc_phone_init(phone, task);
176 phone->state = IPC_PHONE_CONNECTING;
177
178 kobject_initialize(kobject, KOBJECT_TYPE_PHONE, phone,
179 &phone_kobject_ops);
180 phone->kobject = kobject;
181
182 cap_publish(task, handle, kobject);
183
184 *out_handle = handle;
185 }
186 return rc;
187}
188
189/** Free slot from a disconnected phone.
190 *
191 * All already sent messages will be correctly processed.
192 *
193 * @param handle Phone capability handle of the phone to be freed.
194 *
195 */
196void phone_dealloc(cap_handle_t handle)
197{
198 kobject_t *kobj = cap_unpublish(TASK, handle, KOBJECT_TYPE_PHONE);
199 if (!kobj)
200 return;
201
202 assert(kobj->phone);
203 assert(kobj->phone->state == IPC_PHONE_CONNECTING);
204
205 kobject_put(kobj);
206 cap_free(TASK, handle);
207}
208
209/** Connect phone to a given answerbox.
210 *
211 * @param handle Capability handle of the phone to be connected.
212 * @param box Answerbox to which to connect the phone.
213 * @return True if the phone was connected, false otherwise.
214 */
215bool phone_connect(cap_handle_t handle, answerbox_t *box)
216{
217 kobject_t *phone_obj = kobject_get(TASK, handle, KOBJECT_TYPE_PHONE);
218 if (!phone_obj)
219 return false;
220
221 assert(phone_obj->phone->state == IPC_PHONE_CONNECTING);
222
223 /* Hand over phone_obj reference to the answerbox */
224 return ipc_phone_connect(phone_obj->phone, box);
225}
226
227/** @}
228 */
Note: See TracBrowser for help on using the repository browser.