source: mainline/kernel/genarch/src/kbd/i8042.c@ ee06f2a

/*
 * Copyright (c) 2001-2004 Jakub Jermar
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * - Redistributions of source code must retain the above copyright
 *   notice, this list of conditions and the following disclaimer.
 * - Redistributions in binary form must reproduce the above copyright
 *   notice, this list of conditions and the following disclaimer in the
 *   documentation and/or other materials provided with the distribution.
 * - The name of the author may not be used to endorse or promote products
 *   derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/** @addtogroup genarch 
 * @{
 */
/**
 * @file
 * @brief       i8042 processor driver.
 *
 * It takes care of low-level keyboard functions.
 */

#include <genarch/kbd/i8042.h>
#include <arch/drivers/kbd.h>
#include <genarch/kbd/key.h>
#include <genarch/kbd/scanc.h>
#include <genarch/kbd/scanc_pc.h>
#include <arch/drivers/i8042.h>
#include <cpu.h>
#include <arch/asm.h>
#include <arch.h>
#include <console/chardev.h>
#include <console/console.h>
#include <interrupt.h>
#include <sysinfo/sysinfo.h>
#include <ipc/irq.h>

/* Keyboard commands. */
#define KBD_ENABLE      0xf4
#define KBD_DISABLE     0xf5
#define KBD_ACK         0xfa

/*
 * 60  Write 8042 Command Byte: next data byte written to port 60h is
 *     placed in 8042 command register. Format:
 *
 *    |7|6|5|4|3|2|1|0|8042 Command Byte
 *     | | | | | | | `---- 1=enable output register full interrupt
 *     | | | | | | `----- should be 0
 *     | | | | | `------ 1=set status register system, 0=clear
 *     | | | | `------- 1=override keyboard inhibit, 0=allow inhibit
 *     | | | `-------- disable keyboard I/O by driving clock line low
 *     | | `--------- disable auxiliary device, drives clock line low
 *     | `---------- IBM scancode translation 0=AT, 1=PC/XT
 *     `----------- reserved, should be 0
 */

#define i8042_SET_COMMAND       0x60
#define i8042_COMMAND           0x69

#define i8042_BUFFER_FULL_MASK  0x01
#define i8042_WAIT_MASK                 0x02
#define i8042_MOUSE_DATA                0x20

static void i8042_suspend(chardev_t *);
static void i8042_resume(chardev_t *);

static chardev_operations_t ops = {
        .suspend = i8042_suspend,
        .resume = i8042_resume,
        .read = i8042_key_read
};

/** Structure for i8042's IRQ. */
static irq_t i8042_kbd_irq;
static irq_t i8042_mouse_irq;

void i8042_grab(void)
{
        ipl_t ipl = interrupts_disable();
        
        spinlock_lock(&i8042_kbd_irq.lock);
        i8042_kbd_irq.notif_cfg.notify = false;
        spinlock_unlock(&i8042_kbd_irq.lock);
        
        spinlock_lock(&i8042_mouse_irq.lock);
        i8042_mouse_irq.notif_cfg.notify = false;
        spinlock_unlock(&i8042_mouse_irq.lock);
        
        interrupts_restore(ipl);
}

void i8042_release(void)
{
        ipl_t ipl = interrupts_disable();
        
        spinlock_lock(&i8042_kbd_irq.lock);
        if (i8042_kbd_irq.notif_cfg.answerbox)
                i8042_kbd_irq.notif_cfg.notify = true;
        spinlock_unlock(&i8042_kbd_irq.lock);
        
        spinlock_lock(&i8042_mouse_irq.lock);
        if (i8042_mouse_irq.notif_cfg.answerbox)
                i8042_mouse_irq.notif_cfg.notify = true;
        spinlock_unlock(&i8042_mouse_irq.lock);
        
        interrupts_restore(ipl);
}

static irq_ownership_t i8042_claim(void)
{
        return IRQ_ACCEPT;
}

static void i8042_irq_handler(irq_t *irq, void *arg, ...)
{
        if (irq->notif_cfg.notify && irq->notif_cfg.answerbox)
                ipc_irq_send_notif(irq);
        else {
                uint8_t data;
                uint8_t status;
                
                while (((status = i8042_status_read()) & i8042_BUFFER_FULL_MASK)) {
                        data = i8042_data_read();
                        
                        if ((status & i8042_MOUSE_DATA))
                                continue;

                        if (data & KEY_RELEASE)
                                key_released(data ^ KEY_RELEASE);
                        else
                                key_pressed(data);
                }
        }
}

/** Initialize i8042. */
void i8042_init(devno_t kbd_devno, inr_t kbd_inr, devno_t mouse_devno, inr_t mouse_inr)
{
        chardev_initialize("i8042_kbd", &kbrd, &ops);
        stdin = &kbrd;
        
        irq_initialize(&i8042_kbd_irq);
        i8042_kbd_irq.devno = kbd_devno;
        i8042_kbd_irq.inr = kbd_inr;
        i8042_kbd_irq.claim = i8042_claim;
        i8042_kbd_irq.handler = i8042_irq_handler;
        irq_register(&i8042_kbd_irq);
        
        irq_initialize(&i8042_mouse_irq);
        i8042_mouse_irq.devno = mouse_devno;
        i8042_mouse_irq.inr = mouse_inr;
        i8042_mouse_irq.claim = i8042_claim;
        i8042_mouse_irq.handler = i8042_irq_handler;
        irq_register(&i8042_mouse_irq);
        
        trap_virtual_enable_irqs(1 << kbd_inr);
        trap_virtual_enable_irqs(1 << mouse_inr);
        
        /*
         * Clear input buffer.
         * Number of iterations is limited to prevent infinite looping.
         */
        int i;
        for (i = 0; (i8042_status_read() & i8042_BUFFER_FULL_MASK) && i < 100; i++) {
                i8042_data_read();
        }
        
        sysinfo_set_item_val("kbd", NULL, true);
        sysinfo_set_item_val("kbd.devno", NULL, kbd_devno);
        sysinfo_set_item_val("kbd.inr", NULL, kbd_inr);
#ifdef KBD_LEGACY
        sysinfo_set_item_val("kbd.type", NULL, KBD_LEGACY);
#endif
        sysinfo_set_item_val("mouse", NULL, true);
        sysinfo_set_item_val("mouse.devno", NULL, mouse_devno);
        sysinfo_set_item_val("mouse.inr", NULL, mouse_inr);
        
        i8042_grab();
}

/* Called from getc(). */
void i8042_resume(chardev_t *d)
{
}

/* Called from getc(). */
void i8042_suspend(chardev_t *d)
{
}

char i8042_key_read(chardev_t *d)
{
        char ch;
        
        while (!(ch = active_read_buff_read())) {
                uint8_t x;
                
                while (!(i8042_status_read() & i8042_BUFFER_FULL_MASK));
                
                x = i8042_data_read();
                if (x & KEY_RELEASE)
                        key_released(x ^ KEY_RELEASE);
                else
                        active_read_key_pressed(x);
        }
        return ch;
}

/** Poll for key press and release events.
 *
 * This function can be used to implement keyboard polling.
 */
void i8042_poll(void)
{
        uint8_t x;
        
        while (((x = i8042_status_read() & i8042_BUFFER_FULL_MASK))) {
                x = i8042_data_read();
                if (x & KEY_RELEASE)
                        key_released(x ^ KEY_RELEASE);
                else
                        key_pressed(x);
        }
}

/** @}
 */