source: mainline/kernel/arch/xen32/src/mm/frame.c@ 764c302

lfn serial ticket/834-toolchain-update topic/msim-upgrade topic/simplify-dev-export
Last change on this file since 764c302 was a0c12f5, checked in by Martin Decky <martin@…>, 19 years ago

make burst updates

  • Property mode set to 100644
File size: 5.1 KB
Line 
1/*
2 * Copyright (C) 2001-2004 Jakub Jermar
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 *
9 * - Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * - Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * - The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 */
28
29/** @addtogroup xen32mm
30 * @{
31 */
32/** @file
33 * @ingroup xen32mm
34 */
35
36#include <mm/frame.h>
37#include <arch/mm/frame.h>
38#include <mm/as.h>
39#include <config.h>
40#include <arch/boot/boot.h>
41#include <arch/hypercall.h>
42#include <panic.h>
43#include <debug.h>
44#include <align.h>
45#include <macros.h>
46
47#include <console/cmd.h>
48#include <console/kconsole.h>
49
50uintptr_t last_frame = 0;
51
52#define L1_PT_SHIFT 10
53#define L2_PT_SHIFT 0
54
55#define L1_PT_ENTRIES 1024
56#define L2_PT_ENTRIES 1024
57
58#define L1_OFFSET_MASK (L1_PT_ENTRIES - 1)
59#define L2_OFFSET_MASK (L2_PT_ENTRIES - 1)
60
61#define PFN2PTL1_OFFSET(pfn) ((pfn >> L1_PT_SHIFT) & L1_OFFSET_MASK)
62#define PFN2PTL2_OFFSET(pfn) ((pfn >> L2_PT_SHIFT) & L2_OFFSET_MASK)
63
64#define PAGE_MASK (~(PAGE_SIZE - 1))
65
66#define PTE2ADDR(pte) (pte & PAGE_MASK)
67
68#define _PAGE_PRESENT 0x001UL
69#define _PAGE_RW 0x002UL
70#define _PAGE_USER 0x004UL
71#define _PAGE_PWT 0x008UL
72#define _PAGE_PCD 0x010UL
73#define _PAGE_ACCESSED 0x020UL
74#define _PAGE_DIRTY 0x040UL
75#define _PAGE_PAT 0x080UL
76#define _PAGE_PSE 0x080UL
77#define _PAGE_GLOBAL 0x100UL
78
79#define L1_PROT (_PAGE_PRESENT | _PAGE_ACCESSED)
80#define L2_PROT (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED)
81
82void frame_arch_init(void)
83{
84 if (config.cpu_active == 1) {
85 /* The only memory zone starts just after page table */
86 pfn_t start = ADDR2PFN(ALIGN_UP(KA2PA(start_info.pt_base), PAGE_SIZE)) + start_info.nr_pt_frames;
87 size_t size = start_info.nr_pages - start;
88
89 /* Create identity mapping */
90 pfn_t phys;
91 count_t count = 0;
92 for (phys = start; phys < start + size; phys++) {
93 mmu_update_t updates[L2_PT_ENTRIES];
94 pfn_t virt = ADDR2PFN(PA2KA(PFN2ADDR(phys)));
95
96 size_t ptl1_offset = PFN2PTL1_OFFSET(virt);
97 size_t ptl2_offset = PFN2PTL2_OFFSET(virt);
98
99 unsigned long *ptl2_base = (unsigned long *) PTE2ADDR(start_info.pt_base[ptl1_offset]);
100
101 if (ptl2_base == 0) {
102 mmuext_op_t mmu_ext;
103
104 pfn_t virt2 = ADDR2PFN(PA2KA(PFN2ADDR(start)));
105
106 /* New L1 page table entry needed */
107 memsetb(PFN2ADDR(virt2), PAGE_SIZE, 0);
108
109 size_t ptl1_offset2 = PFN2PTL1_OFFSET(virt2);
110 size_t ptl2_offset2 = PFN2PTL2_OFFSET(virt2);
111 unsigned long *ptl2_base2 = (unsigned long *) PTE2ADDR(start_info.pt_base[ptl1_offset2]);
112
113 if (ptl2_base2 == 0)
114 panic("Unable to find page table reference");
115
116 updates[count].ptr = (uintptr_t) &ptl2_base2[ptl2_offset2];
117 updates[count].val = PFN2ADDR(start_info.mfn_list[start]) | L1_PROT;
118 if (xen_mmu_update(updates, count + 1, NULL, DOMID_SELF) < 0)
119 panic("Unable to map new page table");
120 count = 0;
121
122 mmu_ext.cmd = MMUEXT_PIN_L1_TABLE;
123 mmu_ext.arg1.mfn = start_info.mfn_list[start];
124 if (xen_mmuext_op(&mmu_ext, 1, NULL, DOMID_SELF) < 0)
125 panic("Error pinning new page table");
126
127 unsigned long *ptl0 = (unsigned long *) PFN2ADDR(start_info.mfn_list[ADDR2PFN(KA2PA(start_info.pt_base))]);
128
129 updates[count].ptr = (uintptr_t) &ptl0[ptl1_offset];
130 updates[count].val = PFN2ADDR(start_info.mfn_list[start]) | L2_PROT;
131 if (xen_mmu_update(updates, count + 1, NULL, DOMID_SELF) < 0)
132 panic("Unable to update PTE for page table");
133 count = 0;
134
135 ptl2_base = (unsigned long *) PTE2ADDR(start_info.pt_base[ptl1_offset]);
136 start++;
137 size--;
138 }
139
140 updates[count].ptr = (uintptr_t) &ptl2_base[ptl2_offset];
141 updates[count].val = PFN2ADDR(start_info.mfn_list[phys]) | L2_PROT;
142 count++;
143
144 if ((count == L2_PT_ENTRIES) || (phys + 1 == start + size)) {
145 if (xen_mmu_update(updates, count, NULL, DOMID_SELF) < 0)
146 panic("Unable to update PTE");
147 count = 0;
148 }
149 }
150
151 zone_create(start, size, start, 0);
152 last_frame = start + size;
153 }
154}
155
156/** @}
157 */
Note: See TracBrowser for help on using the repository browser.