source: mainline/kernel/arch/sparc64/include/drivers/z8530.h@ 7dcf22a

/*
 * Copyright (C) 2006 Jakub Jermar
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * - Redistributions of source code must retain the above copyright
 *   notice, this list of conditions and the following disclaimer.
 * - Redistributions in binary form must reproduce the above copyright
 *   notice, this list of conditions and the following disclaimer in the
 *   documentation and/or other materials provided with the distribution.
 * - The name of the author may not be used to endorse or promote products
 *   derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/** @addtogroup sparc64 
 * @{
 */
/** @file
 */

#ifndef KERN_sparc64_Z8530_H_
#define KERN_sparc64_Z8530_H_

#include <arch/types.h>
#include <typedefs.h>
#include <arch/drivers/kbd.h>

#define Z8530_CHAN_A    4
#define Z8530_CHAN_B    0

#define WR0     0
#define WR1     1
#define WR2     2
#define WR3     3
#define WR4     4
#define WR5     5
#define WR6     6
#define WR7     7
#define WR8     8
#define WR9     9
#define WR10    10
#define WR11    11
#define WR12    12
#define WR13    13
#define WR14    14
#define WR15    15

#define RR0     0
#define RR1     1
#define RR2     2
#define RR3     3
#define RR8     8
#define RR10    10
#define RR12    12
#define RR13    13
#define RR14    14
#define RR15    15

/* Write Register 0 */
#define WR0_TX_IP_RST   (0x5<<3)        /** Reset pending TX interrupt. */
#define WR0_ERR_RST     (0x6<<3)

/* Write Register 1 */
#define WR1_RID         (0x0<<3)        /** Receive Interrupts Disabled. */
#define WR1_RIFCSC      (0x1<<3)        /** Receive Interrupt on First Character or Special Condition. */
#define WR1_IARCSC      (0x2<<3)        /** Interrupt on All Receive Characters or Special Conditions. */
#define WR1_RISC        (0x3<<3)        /** Receive Interrupt on Special Condition. */
#define WR1_PISC        (0x1<<2)        /** Parity Is Special Condition. */

/* Write Register 3 */
#define WR3_RX_ENABLE   (0x1<<0)        /** Rx Enable. */
#define WR3_RX8BITSCH   (0x3<<6)        /** 8-bits per character. */

/* Write Register 9 */
#define WR9_MIE         (0x1<<3)        /** Master Interrupt Enable. */

/* Read Register 0 */
#define RR0_RCA         (0x1<<0)        /** Receive Character Available. */

static inline void z8530_write(index_t chan, uint8_t reg, uint8_t val)
{
        /*
         * Registers 8-15 will automatically issue the Point High
         * command as their bit 3 is 1.
         */
        kbd_virt_address[WR0+chan] = reg;       /* select register */
        kbd_virt_address[WR0+chan] = val;       /* write value */
}

static inline void z8530_write_a(uint8_t reg, uint8_t val)
{
        z8530_write(Z8530_CHAN_A, reg, val);
}
static inline void z8530_write_b(uint8_t reg, uint8_t val)
{
        z8530_write(Z8530_CHAN_B, reg, val);
}

static inline uint8_t z8530_read(index_t chan, uint8_t reg) 
{
        /*
         * Registers 8-15 will automatically issue the Point High
         * command as their bit 3 is 1.
         */
        kbd_virt_address[WR0+chan] = reg;       /* select register */
        return kbd_virt_address[WR0+chan];
}

static inline uint8_t z8530_read_a(uint8_t reg)
{
        return z8530_read(Z8530_CHAN_A, reg);
}
static inline uint8_t z8530_read_b(uint8_t reg)
{
        return z8530_read(Z8530_CHAN_B, reg);
}

#endif

/** @}
 */