source: mainline/kernel/arch/mips32/src/mips32.c@ c2417bc

lfn serial ticket/834-toolchain-update topic/msim-upgrade topic/simplify-dev-export
Last change on this file since c2417bc was c2417bc, checked in by Martin Decky <martin@…>, 16 years ago

change the way how input devices are wired together according to ticket #44
(also the proposal http://lists.modry.cz/cgi-bin/private/helenos-devel/2009-March/002507.html)

  • Property mode set to 100644
File size: 6.8 KB
Line 
1/*
2 * Copyright (c) 2003-2004 Jakub Jermar
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 *
9 * - Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * - Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * - The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 */
28
29/** @addtogroup mips32
30 * @{
31 */
32/** @file
33 */
34
35#include <arch.h>
36#include <arch/cp0.h>
37#include <arch/exception.h>
38#include <mm/as.h>
39#include <userspace.h>
40#include <memstr.h>
41#include <proc/thread.h>
42#include <proc/uarg.h>
43#include <print.h>
44#include <console/console.h>
45#include <syscall/syscall.h>
46#include <sysinfo/sysinfo.h>
47#include <arch/interrupt.h>
48#include <console/chardev.h>
49#include <arch/barrier.h>
50#include <arch/debugger.h>
51#include <genarch/fb/fb.h>
52#include <genarch/fb/visuals.h>
53#include <genarch/drivers/dsrln/dsrlnin.h>
54#include <genarch/drivers/dsrln/dsrlnout.h>
55#include <genarch/srln/srln.h>
56#include <macros.h>
57#include <config.h>
58#include <string.h>
59#include <arch/drivers/msim.h>
60#include <arch/asm/regname.h>
61
62/* Size of the code jumping to the exception handler code
63 * - J+NOP
64 */
65#define EXCEPTION_JUMP_SIZE 8
66
67#define TLB_EXC ((char *) 0x80000000)
68#define NORM_EXC ((char *) 0x80000180)
69#define CACHE_EXC ((char *) 0x80000100)
70
71
72/* Why the linker moves the variable 64K away in assembler
73 * when not in .text section?
74 */
75
76/* Stack pointer saved when entering user mode */
77uintptr_t supervisor_sp __attribute__ ((section (".text")));
78
79count_t cpu_count = 0;
80
81/** Performs mips32-specific initialization before main_bsp() is called. */
82void arch_pre_main(void *entry __attribute__((unused)), bootinfo_t *bootinfo)
83{
84 /* Setup usermode */
85 init.cnt = bootinfo->cnt;
86
87 count_t i;
88 for (i = 0; i < min3(bootinfo->cnt, TASKMAP_MAX_RECORDS, CONFIG_INIT_TASKS); i++) {
89 init.tasks[i].addr = bootinfo->tasks[i].addr;
90 init.tasks[i].size = bootinfo->tasks[i].size;
91 str_cpy(init.tasks[i].name, CONFIG_TASK_NAME_BUFLEN,
92 bootinfo->tasks[i].name);
93 }
94
95 for (i = 0; i < CPUMAP_MAX_RECORDS; i++) {
96 if ((bootinfo->cpumap & (1 << i)) != 0)
97 cpu_count++;
98 }
99}
100
101void arch_pre_mm_init(void)
102{
103 /* It is not assumed by default */
104 interrupts_disable();
105
106 /* Initialize dispatch table */
107 exception_init();
108
109 /* Copy the exception vectors to the right places */
110 memcpy(TLB_EXC, (char *) tlb_refill_entry, EXCEPTION_JUMP_SIZE);
111 smc_coherence_block(TLB_EXC, EXCEPTION_JUMP_SIZE);
112 memcpy(NORM_EXC, (char *) exception_entry, EXCEPTION_JUMP_SIZE);
113 smc_coherence_block(NORM_EXC, EXCEPTION_JUMP_SIZE);
114 memcpy(CACHE_EXC, (char *) cache_error_entry, EXCEPTION_JUMP_SIZE);
115 smc_coherence_block(CACHE_EXC, EXCEPTION_JUMP_SIZE);
116
117 /*
118 * Switch to BEV normal level so that exception vectors point to the
119 * kernel. Clear the error level.
120 */
121 cp0_status_write(cp0_status_read() &
122 ~(cp0_status_bev_bootstrap_bit | cp0_status_erl_error_bit));
123
124 /*
125 * Mask all interrupts
126 */
127 cp0_mask_all_int();
128
129 debugger_init();
130}
131
132void arch_post_mm_init(void)
133{
134 interrupt_init();
135
136#ifdef CONFIG_FB
137 /* GXemul framebuffer */
138 fb_properties_t gxemul_prop = {
139 .addr = 0x12000000,
140 .offset = 0,
141 .x = 640,
142 .y = 480,
143 .scan = 1920,
144 .visual = VISUAL_BGR_8_8_8,
145 };
146 fb_init(&gxemul_prop);
147#else
148#ifdef CONFIG_MIPS_PRN
149 dsrlnout_init((ioport8_t *) MSIM_KBD_ADDRESS);
150#endif /* CONFIG_MIPS_PRN */
151#endif /* CONFIG_FB */
152}
153
154void arch_post_cpu_init(void)
155{
156}
157
158void arch_pre_smp_init(void)
159{
160}
161
162void arch_post_smp_init(void)
163{
164#ifdef CONFIG_MIPS_KBD
165 /*
166 * Initialize the msim/GXemul keyboard port. Then initialize the serial line
167 * module and connect it to the msim/GXemul keyboard. Enable keyboard interrupts.
168 */
169 dsrlnin_instance_t *dsrlnin_instance
170 = dsrlnin_init((dsrlnin_t *) MSIM_KBD_ADDRESS, MSIM_KBD_IRQ);
171 if (dsrlnin_instance) {
172 srln_instance_t *srln_instance = srln_init();
173 if (srln_instance) {
174 indev_t *sink = stdin_wire();
175 indev_t *srln = srln_wire(srln_instance, sink);
176 dsrlnin_wire(dsrlnin_instance, srln);
177 cp0_unmask_int(MSIM_KBD_IRQ);
178 }
179 }
180
181 /*
182 * This is the necessary evil until the userspace driver is entirely
183 * self-sufficient.
184 */
185 sysinfo_set_item_val("kbd", NULL, true);
186 sysinfo_set_item_val("kbd.inr", NULL, MSIM_KBD_IRQ);
187 sysinfo_set_item_val("kbd.address.virtual", NULL, MSIM_KBD_ADDRESS);
188#endif
189}
190
191void calibrate_delay_loop(void)
192{
193}
194
195void userspace(uspace_arg_t *kernel_uarg)
196{
197 /* EXL = 1, UM = 1, IE = 1 */
198 cp0_status_write(cp0_status_read() | (cp0_status_exl_exception_bit |
199 cp0_status_um_bit | cp0_status_ie_enabled_bit));
200 cp0_epc_write((uintptr_t) kernel_uarg->uspace_entry);
201 userspace_asm(((uintptr_t) kernel_uarg->uspace_stack + PAGE_SIZE),
202 (uintptr_t) kernel_uarg->uspace_uarg,
203 (uintptr_t) kernel_uarg->uspace_entry);
204
205 while (1);
206}
207
208/** Perform mips32 specific tasks needed before the new task is run. */
209void before_task_runs_arch(void)
210{
211}
212
213/** Perform mips32 specific tasks needed before the new thread is scheduled. */
214void before_thread_runs_arch(void)
215{
216 supervisor_sp = (uintptr_t) &THREAD->kstack[THREAD_STACK_SIZE -
217 SP_DELTA];
218}
219
220void after_thread_ran_arch(void)
221{
222}
223
224/** Set thread-local-storage pointer
225 *
226 * We have it currently in K1, it is
227 * possible to have it separately in the future.
228 */
229unative_t sys_tls_set(unative_t addr)
230{
231 return 0;
232}
233
234void arch_reboot(void)
235{
236 ___halt();
237 while (1);
238}
239
240/** Construct function pointer
241 *
242 * @param fptr function pointer structure
243 * @param addr function address
244 * @param caller calling function address
245 *
246 * @return address of the function pointer
247 *
248 */
249void *arch_construct_function(fncptr_t *fptr, void *addr, void *caller)
250{
251 return addr;
252}
253
254void arch_grab_console(void)
255{
256#ifdef CONFIG_FB
257 fb_redraw();
258#endif
259}
260
261/** Return console to userspace
262 *
263 */
264void arch_release_console(void)
265{
266}
267
268/** @}
269 */
Note: See TracBrowser for help on using the repository browser.