source: mainline/kernel/arch/ia64/src/start.S@ 19b5929

#
# Copyright (c) 2005 Jakub Jermar
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# - Redistributions of source code must retain the above copyright
#   notice, this list of conditions and the following disclaimer.
# - Redistributions in binary form must reproduce the above copyright
#   notice, this list of conditions and the following disclaimer in the
#   documentation and/or other materials provided with the distribution.
# - The name of the author may not be used to endorse or promote products
#   derived from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#

#include <arch/register.h>
#include <arch/mm/page.h>
#include <arch/mm/asid.h>
#include <mm/asid.h>

#define RR_MASK    (0xFFFFFFFF00000002)
#define RID_SHIFT  8
#define PS_SHIFT   2

#define KERNEL_TRANSLATION_I    0x0010000000000661
#define KERNEL_TRANSLATION_D    0x0010000000000661
#define KERNEL_TRANSLATION_VIO  0x0010000000000671
#define KERNEL_TRANSLATION_IO   0x00100FFFFC000671
#define KERNEL_TRANSLATION_FW   0x00100000F0000671

.section K_TEXT_START, "ax"

.global kernel_image_start

stack0:
kernel_image_start:
        .auto
        
#ifdef CONFIG_SMP
        # Identify self(CPU) in OS structures by ID / EID
        
        mov r9 = cr64
        mov r10 = 1
        movl r12 = 0xffffffff
        movl r8 = cpu_by_id_eid_list
        and r8 = r8, r12
        shr r9 = r9, 16
        add r8 = r8, r9
        st1 [r8] = r10
#endif
        
        mov psr.l = r0
        srlz.i
        srlz.d
        
        # Fill TR.i and TR.d using Region Register #VRN_KERNEL
        
        movl r8 = (VRN_KERNEL << VRN_SHIFT)
        mov r9 = rr[r8]
        
        movl r10 = (RR_MASK)
        and r9 = r10, r9
        movl r10 = ((RID_KERNEL << RID_SHIFT) | (KERNEL_PAGE_WIDTH << PS_SHIFT))
        or r9 = r10, r9
        
        mov rr[r8] = r9
        
        movl r8 = (VRN_KERNEL << VRN_SHIFT)
        mov cr.ifa = r8
        
        mov r11 = cr.itir
        movl r10 = (KERNEL_PAGE_WIDTH << PS_SHIFT)
        or r10 = r10, r11
        mov cr.itir = r10
        
        movl r10 = (KERNEL_TRANSLATION_I)
        itr.i itr[r0] = r10
        movl r10 = (KERNEL_TRANSLATION_D)
        itr.d dtr[r0] = r10
        
        movl r7 = 1
        movl r8 = (VRN_KERNEL << VRN_SHIFT) | VIO_OFFSET
        mov cr.ifa = r8
        movl r10 = (KERNEL_TRANSLATION_VIO)
        itr.d dtr[r7] = r10
        
        mov r11 = cr.itir
        movl r10 = ~0xfc
        and r10 = r10, r11
        movl r11 = (IO_PAGE_WIDTH << PS_SHIFT)
        or r10 = r10, r11
        mov cr.itir = r10
        
        movl r7 = 2
        movl r8 = (VRN_KERNEL << VRN_SHIFT) | IO_OFFSET
        mov cr.ifa = r8
        movl r10 = (KERNEL_TRANSLATION_IO)
        itr.d dtr[r7] = r10
        
        # Setup mapping for firmware area (also SAPIC)
        
        mov r11 = cr.itir
        movl r10 = ~0xfc
        and r10 = r10, r11
        movl r11 = (FW_PAGE_WIDTH << PS_SHIFT)
        or r10 = r10, r11
        mov cr.itir = r10
        
        movl r7 = 3
        movl r8 = (VRN_KERNEL << VRN_SHIFT) | FW_OFFSET
        mov cr.ifa = r8
        movl r10 = (KERNEL_TRANSLATION_FW)
        itr.d dtr[r7] = r10
        
        # Initialize DSR
        
        movl r10 = (DCR_DP_MASK | DCR_DK_MASK | DCR_DX_MASK | DCR_DR_MASK | DCR_DA_MASK | DCR_DD_MASK | DCR_LC_MASK)
        mov r9 = cr.dcr
        or r10 = r10, r9
        mov cr.dcr = r10
        
        # Initialize PSR
        
        movl r10 = (PSR_DT_MASK | PSR_RT_MASK | PSR_IT_MASK | PSR_IC_MASK)  /* Enable paging */
        mov r9 = psr
        
        or r10 = r10, r9
        mov cr.ipsr = r10
        mov cr.ifs = r0
        movl r8 = paging_start
        mov cr.iip = r8
        srlz.d
        srlz.i
        
        .explicit
        
        /*
         * Return From Interrupt is the only way to
         * fill the upper half word of PSR.
         */
        rfi ;;

.global paging_start
paging_start:
        
        /*
         * Now we are paging.
         */
        
        # Switch to register bank 1
        bsw.1
        
#ifdef CONFIG_SMP
        # Am I BSP or AP?
        movl r20 = bsp_started ;;
        ld8 r20 = [r20] ;;
        cmp.eq p3, p2 = r20, r0 ;;
#else
        cmp.eq p3, p2 = r0, r0 ;;  /* you are BSP */
#endif  /* CONFIG_SMP */
        
        # Initialize register stack
        mov ar.rsc = r0
        movl r8 = (VRN_KERNEL << VRN_SHIFT) ;;
        mov ar.bspstore = r8
        loadrs
        
        # Initialize memory stack to some sane value
        movl r12 = stack0 ;;
        add r12 = -16, r12  /* allocate a scratch area on the stack */
        
        # Initialize gp (Global Pointer) register
        movl r20 = (VRN_KERNEL << VRN_SHIFT) ;;
        or r20 = r20, r1 ;;
        movl r1 = kernel_image_start
        
        /*
         * Initialize bootinfo on BSP.
         */
(p3)    addl r21 = @gprel(bootinfo), gp ;;
(p3)    st8 [r21] = r20
        
        ssm (1 << 19) ;; /* Disable f32 - f127 */
        srlz.i
        srlz.d ;;
        
#ifdef CONFIG_SMP
(p2)    movl r18 = main_ap ;;
(p2)    mov b1 = r18 ;;
(p2)    br.call.sptk.many b0 = b1
        
        # Mark that BSP is on
        
        mov r20 = 1 ;;
        movl r21 = bsp_started ;;
        st8 [r21] = r20 ;;
#endif
        
        br.call.sptk.many b0 = arch_pre_main
        
        movl r18 = main_bsp ;;
        mov b1 = r18 ;;
        br.call.sptk.many b0 = b1

0:
        br 0b

#ifdef CONFIG_SMP

.align 4096
kernel_image_ap_start:
        .auto
        
        # Identify self(CPU) in OS structures by ID / EID
        
        mov r9 = cr64
        mov r10 = 1
        movl r12 = 0xffffffff
        movl r8 = cpu_by_id_eid_list
        and r8 = r8, r12
        shr r9 = r9, 16
        add r8 = r8, r9
        st1 [r8] = r10
        
        # Wait for wakeup synchro signal (#3 in cpu_by_id_eid_list)

kernel_image_ap_start_loop:
        movl r11 = kernel_image_ap_start_loop
        and r11 = r11, r12
        mov b1 = r11
        
        ld1 r20 = [r8]
        movl r21 = 3
        cmp.eq p2, p3 = r20, r21
(p3)    br.call.sptk.many b0 = b1
        
        movl r11 = kernel_image_start
        and r11 = r11, r12
        mov b1 = r11
        br.call.sptk.many b0 = b1

.align 16
.global bsp_started
bsp_started:
        .space 8

.align 4096
.global cpu_by_id_eid_list
cpu_by_id_eid_list:
        .space 65536

#endif  /* CONFIG_SMP */