source: mainline/kernel/arch/ia64/src/ivt.S@ 44bec47

lfn serial ticket/834-toolchain-update topic/msim-upgrade topic/simplify-dev-export
Last change on this file since 44bec47 was df4ed85, checked in by Jakub Jermar <jakub@…>, 19 years ago

© versus ©

  • Property mode set to 100644
File size: 15.5 KB
Line 
1#
2# Copyright (c) 2005 Jakub Vana
3# Copyright (c) 2005 Jakub Jermar
4# All rights reserved.
5#
6# Redistribution and use in source and binary forms, with or without
7# modification, are permitted provided that the following conditions
8# are met:
9#
10# - Redistributions of source code must retain the above copyright
11# notice, this list of conditions and the following disclaimer.
12# - Redistributions in binary form must reproduce the above copyright
13# notice, this list of conditions and the following disclaimer in the
14# documentation and/or other materials provided with the distribution.
15# - The name of the author may not be used to endorse or promote products
16# derived from this software without specific prior written permission.
17#
18# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
19# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
20# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
21# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
22# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
23# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
24# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
25# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
26# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
27# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28#
29
30#include <arch/stack.h>
31#include <arch/register.h>
32#include <arch/mm/page.h>
33#include <align.h>
34
35#define FRS_TO_SAVE 30
36#define STACK_ITEMS (19 + FRS_TO_SAVE*2)
37#define STACK_FRAME_SIZE ALIGN_UP((STACK_ITEMS*STACK_ITEM_SIZE) + STACK_SCRATCH_AREA_SIZE, STACK_ALIGNMENT)
38
39#if (STACK_ITEMS % 2 == 0)
40# define STACK_FRAME_BIAS 8
41#else
42# define STACK_FRAME_BIAS 16
43#endif
44
45/** Partitioning of bank 0 registers. */
46#define R_OFFS r16
47#define R_HANDLER r17
48#define R_RET r18
49#define R_TMP r19
50#define R_KSTACK_BSP r22 /* keep in sync with before_thread_runs_arch() */
51#define R_KSTACK r23 /* keep in sync with before_thread_runs_arch() */
52
53/** Heavyweight interrupt handler
54 *
55 * This macro roughly follows steps from 1 to 19 described in
56 * Intel Itanium Architecture Software Developer's Manual, Chapter 3.4.2.
57 *
58 * HEAVYWEIGHT_HANDLER macro must cram into 16 bundles (48 instructions).
59 * This goal is achieved by using procedure calls after RSE becomes operational.
60 *
61 * Some steps are skipped (enabling and disabling interrupts).
62 *
63 * @param offs Offset from the beginning of IVT.
64 * @param handler Interrupt handler address.
65 */
66.macro HEAVYWEIGHT_HANDLER offs, handler=universal_handler
67 .org ivt + \offs
68 mov R_OFFS = \offs
69 movl R_HANDLER = \handler ;;
70 br heavyweight_handler
71.endm
72
73.global heavyweight_handler
74heavyweight_handler:
75 /* 1. copy interrupt registers into bank 0 */
76
77 /*
78 * Note that r24-r31 from bank 0 can be used only as long as PSR.ic = 0.
79 */
80
81 /* Set up FPU as in interrupted context. */
82 mov r24 = psr
83 mov r25 = cr.ipsr
84 mov r26 = PSR_DFH_MASK
85 mov r27 = ~PSR_DFH_MASK ;;
86 and r26 = r25, r26
87 and r24 = r24, r27;;
88 or r24 = r24, r26;;
89 mov psr.l = r24;;
90 srlz.i
91 srlz.d;;
92
93 mov r24 = cr.iip
94 mov r25 = cr.ipsr
95 mov r26 = cr.iipa
96 mov r27 = cr.isr
97 mov r28 = cr.ifa
98
99 /* 2. preserve predicate register into bank 0 */
100 mov r29 = pr ;;
101
102 /* 3. switch to kernel memory stack */
103 mov r30 = cr.ipsr
104 shr.u r31 = r12, VRN_SHIFT ;;
105
106 shr.u r30 = r30, PSR_CPL_SHIFT ;;
107 and r30 = PSR_CPL_MASK_SHIFTED, r30 ;;
108
109 /*
110 * Set p3 to true if the interrupted context executed in kernel mode.
111 * Set p4 to false if the interrupted context didn't execute in kernel mode.
112 */
113 cmp.eq p3, p4 = r30, r0 ;;
114 cmp.eq p1, p2 = r30, r0 ;; /* remember IPSR setting in p1 and p2 */
115
116 /*
117 * Set p3 to true if the stack register references kernel address space.
118 * Set p4 to false if the stack register doesn't reference kernel address space.
119 */
120(p3) cmp.eq p3, p4 = VRN_KERNEL, r31 ;;
121
122 /*
123 * Now, p4 is true iff the stack needs to be switched to kernel stack.
124 */
125 mov r30 = r12
126(p4) mov r12 = R_KSTACK ;;
127
128 add r31 = -STACK_FRAME_BIAS, r12 ;;
129 add r12 = -STACK_FRAME_SIZE, r12
130
131 /* 4. save registers in bank 0 into memory stack */
132
133 /*
134 * If this is break_instruction handler,
135 * copy input parameters to stack.
136 */
137 mov R_TMP = 0x2c00 ;;
138 cmp.eq p6,p5 = R_OFFS, R_TMP ;;
139
140 /*
141 * From now on, if this is break_instruction handler, p6 is true and p5 is false.
142 * Otherwise p6 is false and p5 is true.
143 * Note that p5 is a preserved predicate register and we make use of it.
144 */
145
146(p6) st8 [r31] = r36, -8 ;; /* save in4 */
147(p6) st8 [r31] = r35, -8 ;; /* save in3 */
148(p6) st8 [r31] = r34, -8 ;; /* save in2 */
149(p6) st8 [r31] = r33, -8 ;; /* save in1 */
150(p6) st8 [r31] = r32, -8 ;; /* save in0 */
151(p5) add r31 = -40, r31 ;;
152
153 st8 [r31] = r30, -8 ;; /* save old stack pointer */
154
155 st8 [r31] = r29, -8 ;; /* save predicate registers */
156
157 st8 [r31] = r24, -8 ;; /* save cr.iip */
158 st8 [r31] = r25, -8 ;; /* save cr.ipsr */
159 st8 [r31] = r26, -8 ;; /* save cr.iipa */
160 st8 [r31] = r27, -8 ;; /* save cr.isr */
161 st8 [r31] = r28, -8 ;; /* save cr.ifa */
162
163 /* 5. RSE switch from interrupted context */
164 mov r24 = ar.rsc
165 mov r25 = ar.pfs
166 cover
167 mov r26 = cr.ifs
168
169 st8 [r31] = r24, -8 ;; /* save ar.rsc */
170 st8 [r31] = r25, -8 ;; /* save ar.pfs */
171 st8 [r31] = r26, -8 /* save ar.ifs */
172
173 and r24 = ~(RSC_PL_MASK), r24 ;;
174 and r30 = ~(RSC_MODE_MASK), r24 ;;
175 mov ar.rsc = r30 ;; /* update RSE state */
176
177 mov r27 = ar.rnat
178 mov r28 = ar.bspstore ;;
179
180 /*
181 * Inspect BSPSTORE to figure out whether it is necessary to switch to kernel BSPSTORE.
182 */
183(p1) shr.u r30 = r28, VRN_SHIFT ;;
184(p1) cmp.eq p1, p2 = VRN_KERNEL, r30 ;;
185
186 /*
187 * If BSPSTORE needs to be switched, p1 is false and p2 is true.
188 */
189(p1) mov r30 = r28
190(p2) mov r30 = R_KSTACK_BSP ;;
191(p2) mov ar.bspstore = r30 ;;
192
193 mov r29 = ar.bsp
194
195 st8 [r31] = r27, -8 ;; /* save ar.rnat */
196 st8 [r31] = r30, -8 ;; /* save new value written to ar.bspstore */
197 st8 [r31] = r28, -8 ;; /* save ar.bspstore */
198 st8 [r31] = r29, -8 /* save ar.bsp */
199
200 mov ar.rsc = r24 /* restore RSE's setting + kernel privileges */
201
202 /* steps 6 - 15 are done by heavyweight_handler_inner() */
203 mov R_RET = b0 /* save b0 belonging to interrupted context */
204 br.call.sptk.many b0 = heavyweight_handler_inner
2050: mov b0 = R_RET /* restore b0 belonging to the interrupted context */
206
207 /* 16. RSE switch to interrupted context */
208 cover /* allocate zerro size frame (step 1 (from Intel Docs)) */
209
210 add r31 = (STACK_SCRATCH_AREA_SIZE+(FRS_TO_SAVE*2*8)), r12 ;;
211
212 ld8 r30 = [r31], +8 ;; /* load ar.bsp */
213 ld8 r29 = [r31], +8 ;; /* load ar.bspstore */
214 ld8 r28 = [r31], +8 ;; /* load ar.bspstore_new */
215 sub r27 = r30 , r28 ;; /* calculate loadrs (step 2) */
216 shl r27 = r27, 16
217
218 mov r24 = ar.rsc ;;
219 and r30 = ~3, r24 ;;
220 or r24 = r30 , r27 ;;
221 mov ar.rsc = r24 ;; /* place RSE in enforced lazy mode */
222
223 loadrs /* (step 3) */
224
225 ld8 r27 = [r31], +8 ;; /* load ar.rnat */
226 ld8 r26 = [r31], +8 ;; /* load cr.ifs */
227 ld8 r25 = [r31], +8 ;; /* load ar.pfs */
228 ld8 r24 = [r31], +8 ;; /* load ar.rsc */
229
230 mov ar.bspstore = r29 ;; /* (step 4) */
231 mov ar.rnat = r27 /* (step 5) */
232
233 mov ar.pfs = r25 /* (step 6) */
234 mov cr.ifs = r26
235
236 mov ar.rsc = r24 /* (step 7) */
237
238 /* 17. restore interruption state from memory stack */
239 ld8 r28 = [r31], +8 ;; /* load cr.ifa */
240 ld8 r27 = [r31], +8 ;; /* load cr.isr */
241 ld8 r26 = [r31], +8 ;; /* load cr.iipa */
242 ld8 r25 = [r31], +8 ;; /* load cr.ipsr */
243 ld8 r24 = [r31], +8 ;; /* load cr.iip */
244
245 mov cr.iip = r24;;
246 mov cr.iipa = r26
247 mov cr.isr = r27
248 mov cr.ifa = r28
249
250 /* Set up FPU as in exception. */
251 mov r24 = psr
252 mov r26 = PSR_DFH_MASK
253 mov r27 = ~PSR_DFH_MASK ;;
254 and r25 = r25, r27
255 and r24 = r24, r26 ;;
256 or r25 = r25, r24;;
257 mov cr.ipsr = r25
258
259 /* 18. restore predicate registers from memory stack */
260 ld8 r29 = [r31], +8 ;; /* load predicate registers */
261 mov pr = r29
262
263 /* 19. return from interruption */
264 ld8 r12 = [r31] /* load stack pointer */
265 rfi ;;
266
267.global heavyweight_handler_inner
268heavyweight_handler_inner:
269 /*
270 * From this point, the rest of the interrupted context
271 * will be preserved in stacked registers and backing store.
272 */
273 alloc loc0 = ar.pfs, 0, 48, 2, 0 ;;
274
275 /* bank 0 is going to be shadowed, copy essential data from there */
276 mov loc1 = R_RET /* b0 belonging to interrupted context */
277 mov loc2 = R_HANDLER
278 mov out0 = R_OFFS
279
280 add out1 = STACK_SCRATCH_AREA_SIZE, r12
281
282 /* 6. switch to bank 1 and reenable PSR.ic */
283 ssm PSR_IC_MASK
284 bsw.1 ;;
285 srlz.d
286
287 /* 7. preserve branch and application registers */
288 mov loc3 = ar.unat
289 mov loc4 = ar.lc
290 mov loc5 = ar.ec
291 mov loc6 = ar.ccv
292 mov loc7 = ar.csd
293 mov loc8 = ar.ssd
294
295 mov loc9 = b0
296 mov loc10 = b1
297 mov loc11 = b2
298 mov loc12 = b3
299 mov loc13 = b4
300 mov loc14 = b5
301 mov loc15 = b6
302 mov loc16 = b7
303
304 /* 8. preserve general and floating-point registers */
305 mov loc17 = r1
306 mov loc18 = r2
307 mov loc19 = r3
308 mov loc20 = r4
309 mov loc21 = r5
310 mov loc22 = r6
311 mov loc23 = r7
312(p5) mov loc24 = r8 /* only if not in break_instruction handler */
313 mov loc25 = r9
314 mov loc26 = r10
315 mov loc27 = r11
316 /* skip r12 (stack pointer) */
317 mov loc28 = r13
318 mov loc29 = r14
319 mov loc30 = r15
320 mov loc31 = r16
321 mov loc32 = r17
322 mov loc33 = r18
323 mov loc34 = r19
324 mov loc35 = r20
325 mov loc36 = r21
326 mov loc37 = r22
327 mov loc38 = r23
328 mov loc39 = r24
329 mov loc40 = r25
330 mov loc41 = r26
331 mov loc42 = r27
332 mov loc43 = r28
333 mov loc44 = r29
334 mov loc45 = r30
335 mov loc46 = r31
336
337 add r24 = 96 + STACK_SCRATCH_AREA_SIZE, r12
338 add r25 = 112 + STACK_SCRATCH_AREA_SIZE, r12
339 add r26 = 0 + STACK_SCRATCH_AREA_SIZE, r12
340 add r27 = 16 + STACK_SCRATCH_AREA_SIZE, r12
341 add r28 = 32 + STACK_SCRATCH_AREA_SIZE, r12
342 add r29 = 48 + STACK_SCRATCH_AREA_SIZE, r12
343 add r30 = 64 + STACK_SCRATCH_AREA_SIZE, r12
344 add r31 = 80 + STACK_SCRATCH_AREA_SIZE, r12 ;;
345
346 stf.spill [r26] = f2, 0x80
347 stf.spill [r27] = f3, 0x80
348 stf.spill [r28] = f4, 0x80
349 stf.spill [r29] = f5, 0x80
350 stf.spill [r30] = f6, 0x80
351 stf.spill [r31] = f7, 0x80 ;;
352
353 stf.spill [r24] = f8, 0x80
354 stf.spill [r25] = f9, 0x80
355 stf.spill [r26] = f10, 0x80
356 stf.spill [r27] = f11, 0x80
357 stf.spill [r28] = f12, 0x80
358 stf.spill [r29] = f13, 0x80
359 stf.spill [r30] = f14, 0x80
360 stf.spill [r31] = f15, 0x80 ;;
361
362 stf.spill [r24] = f16, 0x80
363 stf.spill [r25] = f17, 0x80
364 stf.spill [r26] = f18, 0x80
365 stf.spill [r27] = f19, 0x80
366 stf.spill [r28] = f20, 0x80
367 stf.spill [r29] = f21, 0x80
368 stf.spill [r30] = f22, 0x80
369 stf.spill [r31] = f23, 0x80 ;;
370
371 stf.spill [r24] = f24, 0x80
372 stf.spill [r25] = f25, 0x80
373 stf.spill [r26] = f26, 0x80
374 stf.spill [r27] = f27, 0x80
375 stf.spill [r28] = f28, 0x80
376 stf.spill [r29] = f29, 0x80
377 stf.spill [r30] = f30, 0x80
378 stf.spill [r31] = f31, 0x80 ;;
379
380 mov loc47 = ar.fpsr /* preserve floating point status register */
381
382 /* 9. skipped (will not enable interrupts) */
383 /*
384 * ssm PSR_I_MASK
385 * ;;
386 * srlz.d
387 */
388
389 /* 10. call handler */
390 movl r1 = _hardcoded_load_address
391
392 mov b1 = loc2
393 br.call.sptk.many b0 = b1
394
395 /* 11. return from handler */
3960:
397
398 /* 12. skipped (will not disable interrupts) */
399 /*
400 * rsm PSR_I_MASK
401 * ;;
402 * srlz.d
403 */
404
405 /* 13. restore general and floating-point registers */
406 add r24 = 96 + STACK_SCRATCH_AREA_SIZE, r12
407 add r25 = 112 + STACK_SCRATCH_AREA_SIZE, r12
408 add r26 = 0 + STACK_SCRATCH_AREA_SIZE, r12
409 add r27 = 16 + STACK_SCRATCH_AREA_SIZE, r12
410 add r28 = 32 + STACK_SCRATCH_AREA_SIZE, r12
411 add r29 = 48 + STACK_SCRATCH_AREA_SIZE, r12
412 add r30 = 64 + STACK_SCRATCH_AREA_SIZE, r12
413 add r31 = 80 + STACK_SCRATCH_AREA_SIZE, r12 ;;
414
415 ldf.fill f2 = [r26], 0x80
416 ldf.fill f3 = [r27], 0x80
417 ldf.fill f4 = [r28], 0x80
418 ldf.fill f5 = [r29], 0x80
419 ldf.fill f6 = [r30], 0x80
420 ldf.fill f7 = [r31], 0x80 ;;
421
422 ldf.fill f8 = [r24], 0x80
423 ldf.fill f9 = [r25], 0x80
424 ldf.fill f10 = [r26], 0x80
425 ldf.fill f11 = [r27], 0x80
426 ldf.fill f12 = [r28], 0x80
427 ldf.fill f13 = [r29], 0x80
428 ldf.fill f14 = [r30], 0x80
429 ldf.fill f15 = [r31], 0x80 ;;
430
431 ldf.fill f16 = [r24], 0x80
432 ldf.fill f17 = [r25], 0x80
433 ldf.fill f18 = [r26], 0x80
434 ldf.fill f19 = [r27], 0x80
435 ldf.fill f20 = [r28], 0x80
436 ldf.fill f21 = [r29], 0x80
437 ldf.fill f22 = [r30], 0x80
438 ldf.fill f23 = [r31], 0x80 ;;
439
440 ldf.fill f24 = [r24], 0x80
441 ldf.fill f25 = [r25], 0x80
442 ldf.fill f26 = [r26], 0x80
443 ldf.fill f27 = [r27], 0x80
444 ldf.fill f28 = [r28], 0x80
445 ldf.fill f29 = [r29], 0x80
446 ldf.fill f30 = [r30], 0x80
447 ldf.fill f31 = [r31], 0x80 ;;
448
449 mov r1 = loc17
450 mov r2 = loc18
451 mov r3 = loc19
452 mov r4 = loc20
453 mov r5 = loc21
454 mov r6 = loc22
455 mov r7 = loc23
456(p5) mov r8 = loc24 /* only if not in break_instruction handler */
457 mov r9 = loc25
458 mov r10 = loc26
459 mov r11 = loc27
460 /* skip r12 (stack pointer) */
461 mov r13 = loc28
462 mov r14 = loc29
463 mov r15 = loc30
464 mov r16 = loc31
465 mov r17 = loc32
466 mov r18 = loc33
467 mov r19 = loc34
468 mov r20 = loc35
469 mov r21 = loc36
470 mov r22 = loc37
471 mov r23 = loc38
472 mov r24 = loc39
473 mov r25 = loc40
474 mov r26 = loc41
475 mov r27 = loc42
476 mov r28 = loc43
477 mov r29 = loc44
478 mov r30 = loc45
479 mov r31 = loc46
480
481 mov ar.fpsr = loc47 /* restore floating point status register */
482
483 /* 14. restore branch and application registers */
484 mov ar.unat = loc3
485 mov ar.lc = loc4
486 mov ar.ec = loc5
487 mov ar.ccv = loc6
488 mov ar.csd = loc7
489 mov ar.ssd = loc8
490
491 mov b0 = loc9
492 mov b1 = loc10
493 mov b2 = loc11
494 mov b3 = loc12
495 mov b4 = loc13
496 mov b5 = loc14
497 mov b6 = loc15
498 mov b7 = loc16
499
500 /* 15. disable PSR.ic and switch to bank 0 */
501 rsm PSR_IC_MASK
502 bsw.0 ;;
503 srlz.d
504
505 mov R_RET = loc1
506 mov ar.pfs = loc0
507 br.ret.sptk.many b0
508
509.global ivt
510.align 32768
511ivt:
512 HEAVYWEIGHT_HANDLER 0x0000
513 HEAVYWEIGHT_HANDLER 0x0400
514 HEAVYWEIGHT_HANDLER 0x0800
515 HEAVYWEIGHT_HANDLER 0x0c00 alternate_instruction_tlb_fault
516 HEAVYWEIGHT_HANDLER 0x1000 alternate_data_tlb_fault
517 HEAVYWEIGHT_HANDLER 0x1400 data_nested_tlb_fault
518 HEAVYWEIGHT_HANDLER 0x1800
519 HEAVYWEIGHT_HANDLER 0x1c00
520 HEAVYWEIGHT_HANDLER 0x2000 data_dirty_bit_fault
521 HEAVYWEIGHT_HANDLER 0x2400 instruction_access_bit_fault
522 HEAVYWEIGHT_HANDLER 0x2800 data_access_bit_fault
523 HEAVYWEIGHT_HANDLER 0x2c00 break_instruction
524 HEAVYWEIGHT_HANDLER 0x3000 external_interrupt /* For external interrupt, heavyweight handler is used. */
525 HEAVYWEIGHT_HANDLER 0x3400
526 HEAVYWEIGHT_HANDLER 0x3800
527 HEAVYWEIGHT_HANDLER 0x3c00
528 HEAVYWEIGHT_HANDLER 0x4000
529 HEAVYWEIGHT_HANDLER 0x4400
530 HEAVYWEIGHT_HANDLER 0x4800
531 HEAVYWEIGHT_HANDLER 0x4c00
532
533 HEAVYWEIGHT_HANDLER 0x5000 page_not_present
534 HEAVYWEIGHT_HANDLER 0x5100
535 HEAVYWEIGHT_HANDLER 0x5200
536 HEAVYWEIGHT_HANDLER 0x5300
537 HEAVYWEIGHT_HANDLER 0x5400 general_exception
538 HEAVYWEIGHT_HANDLER 0x5500 disabled_fp_register
539 HEAVYWEIGHT_HANDLER 0x5600
540 HEAVYWEIGHT_HANDLER 0x5700
541 HEAVYWEIGHT_HANDLER 0x5800
542 HEAVYWEIGHT_HANDLER 0x5900
543 HEAVYWEIGHT_HANDLER 0x5a00
544 HEAVYWEIGHT_HANDLER 0x5b00
545 HEAVYWEIGHT_HANDLER 0x5c00
546 HEAVYWEIGHT_HANDLER 0x5d00
547 HEAVYWEIGHT_HANDLER 0x5e00
548 HEAVYWEIGHT_HANDLER 0x5f00
549
550 HEAVYWEIGHT_HANDLER 0x6000
551 HEAVYWEIGHT_HANDLER 0x6100
552 HEAVYWEIGHT_HANDLER 0x6200
553 HEAVYWEIGHT_HANDLER 0x6300
554 HEAVYWEIGHT_HANDLER 0x6400
555 HEAVYWEIGHT_HANDLER 0x6500
556 HEAVYWEIGHT_HANDLER 0x6600
557 HEAVYWEIGHT_HANDLER 0x6700
558 HEAVYWEIGHT_HANDLER 0x6800
559 HEAVYWEIGHT_HANDLER 0x6900
560 HEAVYWEIGHT_HANDLER 0x6a00
561 HEAVYWEIGHT_HANDLER 0x6b00
562 HEAVYWEIGHT_HANDLER 0x6c00
563 HEAVYWEIGHT_HANDLER 0x6d00
564 HEAVYWEIGHT_HANDLER 0x6e00
565 HEAVYWEIGHT_HANDLER 0x6f00
566
567 HEAVYWEIGHT_HANDLER 0x7000
568 HEAVYWEIGHT_HANDLER 0x7100
569 HEAVYWEIGHT_HANDLER 0x7200
570 HEAVYWEIGHT_HANDLER 0x7300
571 HEAVYWEIGHT_HANDLER 0x7400
572 HEAVYWEIGHT_HANDLER 0x7500
573 HEAVYWEIGHT_HANDLER 0x7600
574 HEAVYWEIGHT_HANDLER 0x7700
575 HEAVYWEIGHT_HANDLER 0x7800
576 HEAVYWEIGHT_HANDLER 0x7900
577 HEAVYWEIGHT_HANDLER 0x7a00
578 HEAVYWEIGHT_HANDLER 0x7b00
579 HEAVYWEIGHT_HANDLER 0x7c00
580 HEAVYWEIGHT_HANDLER 0x7d00
581 HEAVYWEIGHT_HANDLER 0x7e00
582 HEAVYWEIGHT_HANDLER 0x7f00
Note: See TracBrowser for help on using the repository browser.