source: mainline/kernel/arch/ia64/src/context.S@ 849ed54

lfn serial ticket/834-toolchain-update topic/msim-upgrade topic/simplify-dev-export
Last change on this file since 849ed54 was df4ed85, checked in by Jakub Jermar <jakub@…>, 18 years ago

© versus ©
  • Property mode set to 100644
File size: 6.0 KB
Line 
1#
2# Copyright (c) 2005 Jakub Jermar
3# All rights reserved.
4#
5# Redistribution and use in source and binary forms, with or without
6# modification, are permitted provided that the following conditions
7# are met:
8#
9# - Redistributions of source code must retain the above copyright
10# notice, this list of conditions and the following disclaimer.
11# - Redistributions in binary form must reproduce the above copyright
12# notice, this list of conditions and the following disclaimer in the
13# documentation and/or other materials provided with the distribution.
14# - The name of the author may not be used to endorse or promote products
15# derived from this software without specific prior written permission.
16#
17# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27#
28
29.text
30
31.global context_save_arch
32.global context_restore_arch
33
34context_save_arch:
35 alloc loc0 = ar.pfs, 1, 8, 0, 0
36 mov loc1 = ar.unat ;;
37 /* loc2 */
38 mov loc3 = ar.rsc
39
40 .auto
41
42 /*
43 * Flush dirty registers to backing store.
44 * After this ar.bsp and ar.bspstore are equal.
45 */
46 flushrs
47 mov loc4 = ar.bsp
48
49 /*
50 * Put RSE to enforced lazy mode.
51 * So that ar.rnat can be read.
52 */
53 and loc5 = ~3, loc3
54 mov ar.rsc = loc5
55 mov loc5 = ar.rnat
56
57 .explicit
58
59 mov loc6 = ar.lc
60
61 /*
62 * Save application registers
63 */
64 st8 [in0] = loc0, 8 ;; /* save ar.pfs */
65 st8 [in0] = loc1, 8 ;; /* save ar.unat (caller) */
66 mov loc2 = in0 ;;
67 add in0 = 8, in0 ;; /* skip ar.unat (callee) */
68 st8 [in0] = loc3, 8 ;; /* save ar.rsc */
69 st8 [in0] = loc4, 8 ;; /* save ar.bsp */
70 st8 [in0] = loc5, 8 ;; /* save ar.rnat */
71 st8 [in0] = loc6, 8 ;; /* save ar.lc */
72
73 /*
74 * Save general registers including NaT bits
75 */
76 st8.spill [in0] = r1, 8 ;;
77 st8.spill [in0] = r4, 8 ;;
78 st8.spill [in0] = r5, 8 ;;
79 st8.spill [in0] = r6, 8 ;;
80 st8.spill [in0] = r7, 8 ;;
81 st8.spill [in0] = r12, 8 ;; /* save sp */
82 st8.spill [in0] = r13, 8 ;;
83
84 mov loc3 = ar.unat ;;
85 st8 [loc2] = loc3 /* save ar.unat (callee) */
86
87 /*
88 * Save branch registers
89 */
90 mov loc2 = b0 ;;
91 st8 [in0] = loc2, 8 /* save pc */
92 mov loc3 = b1 ;;
93 st8 [in0] = loc3, 8
94 mov loc4 = b2 ;;
95 st8 [in0] = loc4, 8
96 mov loc5 = b3 ;;
97 st8 [in0] = loc5, 8
98 mov loc6 = b4 ;;
99 st8 [in0] = loc6, 8
100 mov loc7 = b5 ;;
101 st8 [in0] = loc7, 8
102
103 /*
104 * Save predicate registers
105 */
106 mov loc2 = pr ;;
107 st8 [in0] = loc2, 16;; /* Next fpu registers should be spilled to 16B aligned address */
108
109 /*
110 * Save floating-point registers.
111 */
112 stf.spill [in0] = f2, 16 ;;
113 stf.spill [in0] = f3, 16 ;;
114 stf.spill [in0] = f4, 16 ;;
115 stf.spill [in0] = f5, 16 ;;
116
117 stf.spill [in0] = f16, 16 ;;
118 stf.spill [in0] = f17, 16 ;;
119 stf.spill [in0] = f18, 16 ;;
120 stf.spill [in0] = f19, 16 ;;
121 stf.spill [in0] = f20, 16 ;;
122 stf.spill [in0] = f21, 16 ;;
123 stf.spill [in0] = f22, 16 ;;
124 stf.spill [in0] = f23, 16 ;;
125 stf.spill [in0] = f24, 16 ;;
126 stf.spill [in0] = f25, 16 ;;
127 stf.spill [in0] = f26, 16 ;;
128 stf.spill [in0] = f27, 16 ;;
129 stf.spill [in0] = f28, 16 ;;
130 stf.spill [in0] = f29, 16 ;;
131 stf.spill [in0] = f30, 16 ;;
132 stf.spill [in0] = f31, 16 ;;
133
134 mov ar.unat = loc1
135
136 add r8 = r0, r0, 1 /* context_save returns 1 */
137 br.ret.sptk.many b0
138
139context_restore_arch:
140 alloc loc0 = ar.pfs, 1, 9, 0, 0 ;;
141
142 ld8 loc0 = [in0], 8 ;; /* load ar.pfs */
143 ld8 loc1 = [in0], 8 ;; /* load ar.unat (caller) */
144 ld8 loc2 = [in0], 8 ;; /* load ar.unat (callee) */
145 ld8 loc3 = [in0], 8 ;; /* load ar.rsc */
146 ld8 loc4 = [in0], 8 ;; /* load ar.bsp */
147 ld8 loc5 = [in0], 8 ;; /* load ar.rnat */
148 ld8 loc6 = [in0], 8 ;; /* load ar.lc */
149
150 .auto
151
152 /*
153 * Invalidate the ALAT
154 */
155 invala
156
157 /*
158 * Put RSE to enforced lazy mode.
159 * So that ar.bspstore and ar.rnat can be written.
160 */
161 movl loc8 = ~3
162 and loc8 = loc3, loc8
163 mov ar.rsc = loc8
164
165 /*
166 * Flush dirty registers to backing store.
167 * We do this because we want the following move
168 * to ar.bspstore to assign the same value to ar.bsp.
169 */
170 flushrs
171
172 /*
173 * Restore application registers
174 */
175 mov ar.bspstore = loc4 /* rse.bspload = ar.bsp = ar.bspstore = loc4 */
176 mov ar.rnat = loc5
177 mov ar.pfs = loc0
178 mov ar.rsc = loc3
179
180 .explicit
181
182 mov ar.unat = loc2 ;;
183 mov ar.lc = loc6
184
185 /*
186 * Restore general registers including NaT bits
187 */
188 ld8.fill r1 = [in0], 8 ;;
189 ld8.fill r4 = [in0], 8 ;;
190 ld8.fill r5 = [in0], 8 ;;
191 ld8.fill r6 = [in0], 8 ;;
192 ld8.fill r7 = [in0], 8 ;;
193 ld8.fill r12 = [in0], 8 ;; /* restore sp */
194 ld8.fill r13 = [in0], 8 ;;
195
196 /*
197 * Restore branch registers
198 */
199 ld8 loc2 = [in0], 8 ;; /* restore pc */
200 mov b0 = loc2
201 ld8 loc3 = [in0], 8 ;;
202 mov b1 = loc3
203 ld8 loc4 = [in0], 8 ;;
204 mov b2 = loc4
205 ld8 loc5 = [in0], 8 ;;
206 mov b3 = loc5
207 ld8 loc6 = [in0], 8 ;;
208 mov b4 = loc6
209 ld8 loc7 = [in0], 8 ;;
210 mov b5 = loc7
211
212 /*
213 * Restore predicate registers
214 */
215 ld8 loc2 = [in0], 16 ;;
216 mov pr = loc2, ~0
217
218 /*
219 * Restore floating-point registers.
220 */
221 ldf.fill f2 = [in0], 16 ;;
222 ldf.fill f3 = [in0], 16 ;;
223 ldf.fill f4 = [in0], 16 ;;
224 ldf.fill f5 = [in0], 16 ;;
225
226 ldf.fill f16 = [in0], 16 ;;
227 ldf.fill f17 = [in0], 16 ;;
228 ldf.fill f18 = [in0], 16 ;;
229 ldf.fill f19 = [in0], 16 ;;
230 ldf.fill f20 = [in0], 16 ;;
231 ldf.fill f21 = [in0], 16 ;;
232 ldf.fill f22 = [in0], 16 ;;
233 ldf.fill f23 = [in0], 16 ;;
234 ldf.fill f24 = [in0], 16 ;;
235 ldf.fill f25 = [in0], 16 ;;
236 ldf.fill f26 = [in0], 16 ;;
237 ldf.fill f27 = [in0], 16 ;;
238 ldf.fill f28 = [in0], 16 ;;
239 ldf.fill f29 = [in0], 16 ;;
240 ldf.fill f30 = [in0], 16 ;;
241 ldf.fill f31 = [in0], 16 ;;
242
243 mov ar.unat = loc1
244
245 mov r8 = r0 /* context_restore returns 0 */
246 br.ret.sptk.many b0
Note: See TracBrowser for help on using the repository browser.