source: mainline/kernel/arch/ia32/src/asm.S@ 06e1e95

#
# Copyright (C) 2001-2004 Jakub Jermar
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# - Redistributions of source code must retain the above copyright
#   notice, this list of conditions and the following disclaimer.
# - Redistributions in binary form must reproduce the above copyright
#   notice, this list of conditions and the following disclaimer in the
#   documentation and/or other materials provided with the distribution.
# - The name of the author may not be used to endorse or promote products
#   derived from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#

## very low and hardware-level functions

# Mask for interrupts 0 - 31 (bits 0 - 31) where 0 means that int has no error word
# and 1 means interrupt with error word
#define ERROR_WORD_INTERRUPT_LIST 0x00027D00

.text

.global paging_on
.global enable_l_apic_in_msr
.global interrupt_handlers
.global memcpy
.global memcpy_from_uspace
.global memcpy_from_uspace_failover_address
.global memcpy_to_uspace
.global memcpy_to_uspace_failover_address


#define MEMCPY_DST      4
#define MEMCPY_SRC      8
#define MEMCPY_SIZE     12

/** Copy memory to/from userspace.
 *
 * This is almost conventional memcpy().
 * The difference is that there is a failover part
 * to where control is returned from a page fault
 * if the page fault occurs during copy_from_uspace()
 * or copy_to_uspace().
 *
 * @param MEMCPY_DST(%esp)      Destination address.
 * @param MEMCPY_SRC(%esp)      Source address.
 * @param MEMCPY_SIZE(%esp)     Size.
 *
 * @return MEMCPY_SRC(%esp) on success and 0 on failure.
 */
memcpy:
memcpy_from_uspace:
memcpy_to_uspace:
        movl %edi, %edx                         /* save %edi */
        movl %esi, %eax                         /* save %esi */
        
        movl MEMCPY_SIZE(%esp), %ecx
        shrl $2, %ecx                           /* size / 4 */
        
        movl MEMCPY_DST(%esp), %edi
        movl MEMCPY_SRC(%esp), %esi
        
        rep movsl                               /* copy as much as possible word by word */

        movl MEMCPY_SIZE(%esp), %ecx
        andl $3, %ecx                           /* size % 4 */
        jz 0f
        
        rep movsb                               /* copy the rest byte by byte */

0:
        movl %edx, %edi
        movl %eax, %esi
        movl MEMCPY_SRC(%esp), %eax             /* MEMCPY_SRC(%esp), success */
        ret
        
/*
 * We got here from as_page_fault() after the memory operations
 * above had caused a page fault.
 */
memcpy_from_uspace_failover_address:
memcpy_to_uspace_failover_address:
        movl %edx, %edi
        movl %eax, %esi
        xorl %eax, %eax                         /* return 0, failure */
        ret

## Turn paging on
#
# Enable paging and write-back caching in CR0.
#
paging_on:
        movl %cr0,%edx
        orl $(1<<31),%edx               # paging on
        andl $~((1<<30)|(1<<29)),%edx   # clear Cache Disable and not Write Though
        movl %edx,%cr0
        jmp 0f
0:
        ret


## Enable local APIC
#
# Enable local APIC in MSR.
#
enable_l_apic_in_msr:
        push %eax

        movl $0x1b, %ecx
        rdmsr
        orl $(1<<11),%eax
        orl $(0xfee00000),%eax
        wrmsr

        pop %eax
        ret

# Clear nested flag
# overwrites %ecx
.macro CLEAR_NT_FLAG
        pushfl
        pop %ecx
        and $0xffffbfff,%ecx
        push %ecx
        popfl
.endm   

## Declare interrupt handlers
#
# Declare interrupt handlers for n interrupt
# vectors starting at vector i.
#
# The handlers setup data segment registers
# and call exc_dispatch().
#
#define INTERRUPT_ALIGN 64
.macro handler i n

.ifeq \i-0x30     # Syscall handler
        push %ds
        push %es
        push %fs
        push %gs

        # Push arguments on stack
        push %edi
        push %esi
        push %edx
        push %ecx
        push %eax
        
        # we must fill the data segment registers
        movw $16,%ax
        movw %ax,%ds
        movw %ax,%es
        
        sti
        
        call syscall_handler   # syscall_handler(ax,cx,dx,si,di)
        cli
        addl $20, %esp         # clean-up of parameters
        
        pop %gs
        pop %fs
        pop %es
        pop %ds
        
        CLEAR_NT_FLAG
        iret
.else   
        /*
         * This macro distinguishes between two versions of ia32 exceptions.
         * One version has error word and the other does not have it.
         * The latter version fakes the error word on the stack so that the
         * handlers and istate_t can be the same for both types.
         */
        .iflt \i-32
                .if (1 << \i) & ERROR_WORD_INTERRUPT_LIST
                        /* 
                         * With error word, do nothing
                         */
                .else
                        /*
                         * Version without error word,
                         */
                        subl $4, %esp
                .endif
        .else
                /*
                 * Version without error word,
                 */
                subl $4, %esp
        .endif
        
        push %ds
        push %es
        push %fs
        push %gs

#ifdef CONFIG_DEBUG_ALLREGS
        push %ebx
        push %ebp
        push %edi
        push %esi
#else
        sub $16, %esp
#endif
        push %edx
        push %ecx
        push %eax
        
        # we must fill the data segment registers
        movw $16,%ax
        movw %ax,%ds
        movw %ax,%es

        pushl %esp          # *istate
        pushl $(\i)         # intnum
        call exc_dispatch   # excdispatch(intnum, *istate)
        addl $8,%esp        # Clear arguments from stack

        CLEAR_NT_FLAG # Modifies %ecx
        
        pop %eax
        pop %ecx
        pop %edx
#ifdef CONFIG_DEBUG_ALLREGS
        pop %esi
        pop %edi
        pop %ebp
        pop %ebx
#else
        add $16, %esp
#endif  
        
        pop %gs
        pop %fs
        pop %es
        pop %ds

        addl $4,%esp    # Skip error word, no matter whether real or fake.
        iret
.endif

        .align INTERRUPT_ALIGN
        .if (\n-\i)-1
        handler "(\i+1)",\n
        .endif
.endm

# keep in sync with pm.h !!!
IDT_ITEMS=64
.align INTERRUPT_ALIGN
interrupt_handlers:
h_start:
        handler 0 IDT_ITEMS
h_end:

.data
.global interrupt_handler_size

interrupt_handler_size: .long (h_end-h_start)/IDT_ITEMS