source: mainline/generic/src/mm/frame.c@ 389f41e

lfn serial ticket/834-toolchain-update topic/msim-upgrade topic/simplify-dev-export
Last change on this file since 389f41e was 169c408, checked in by Jakub Jermar <jakub@…>, 20 years ago

Move src/ and include/ to generic.

  • Property mode set to 100644
File size: 8.0 KB
Line 
1/*
2 * Copyright (C) 2001-2004 Jakub Jermar
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 *
9 * - Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * - Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * - The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 */
28
29#include <typedefs.h>
30#include <arch/types.h>
31#include <mm/heap.h>
32#include <mm/frame.h>
33#include <mm/vm.h>
34#include <panic.h>
35#include <debug.h>
36#include <list.h>
37#include <synch/spinlock.h>
38#include <arch/asm.h>
39#include <arch.h>
40
41spinlock_t zone_head_lock; /**< this lock protects zone_head list */
42link_t zone_head; /**< list of all zones in the system */
43
44/** Initialize physical memory management
45 *
46 * Initialize physical memory managemnt.
47 */
48void frame_init(void)
49{
50 if (config.cpu_active == 1) {
51 zone_init();
52 }
53
54 frame_arch_init();
55
56 if (config.cpu_active == 1) {
57 frame_region_not_free(config.base, config.base + config.kernel_size + CONFIG_STACK_SIZE);
58 }
59}
60
61/** Allocate a frame
62 *
63 * Allocate a frame of physical memory.
64 *
65 * @param flags Flags for host zone selection and address processing.
66 *
67 * @return Allocated frame.
68 */
69__address frame_alloc(int flags)
70{
71 ipl_t ipl;
72 link_t *cur, *tmp;
73 zone_t *z;
74 zone_t *zone = NULL;
75 frame_t *frame = NULL;
76 __address v;
77
78loop:
79 ipl = interrupts_disable();
80 spinlock_lock(&zone_head_lock);
81
82 /*
83 * First, find suitable frame zone.
84 */
85 for (cur = zone_head.next; cur != &zone_head; cur = cur->next) {
86 z = list_get_instance(cur, zone_t, link);
87
88 spinlock_lock(&z->lock);
89 /*
90 * Check if the zone has any free frames.
91 */
92 if (z->free_count) {
93 zone = z;
94 break;
95 }
96 spinlock_unlock(&z->lock);
97 }
98
99 if (!zone) {
100 if (flags & FRAME_PANIC)
101 panic("Can't allocate frame.\n");
102
103 /*
104 * TODO: Sleep until frames are available again.
105 */
106 spinlock_unlock(&zone_head_lock);
107 interrupts_restore(ipl);
108
109 panic("Sleep not implemented.\n");
110 goto loop;
111 }
112
113 tmp = zone->free_head.next;
114 frame = list_get_instance(tmp, frame_t, link);
115
116 frame->refcount++;
117 list_remove(tmp); /* remove frame from free_head */
118 zone->free_count--;
119 zone->busy_count++;
120
121 v = zone->base + (frame - zone->frames) * FRAME_SIZE;
122
123 if (flags & FRAME_KA)
124 v = PA2KA(v);
125
126 spinlock_unlock(&zone->lock);
127
128 spinlock_unlock(&zone_head_lock);
129 interrupts_restore(ipl);
130
131 return v;
132}
133
134/** Free a frame.
135 *
136 * Find respective frame structrue for supplied addr.
137 * Decrement frame reference count.
138 * If it drops to zero, move the frame structure to free list.
139 *
140 * @param addr Address of the frame to be freed. It must be a multiple of FRAME_SIZE.
141 */
142void frame_free(__address addr)
143{
144 ipl_t ipl;
145 link_t *cur;
146 zone_t *z;
147 zone_t *zone = NULL;
148 frame_t *frame;
149
150 ASSERT(addr % FRAME_SIZE == 0);
151
152 ipl = interrupts_disable();
153 spinlock_lock(&zone_head_lock);
154
155 /*
156 * First, find host frame zone for addr.
157 */
158 for (cur = zone_head.next; cur != &zone_head; cur = cur->next) {
159 z = list_get_instance(cur, zone_t, link);
160
161 spinlock_lock(&z->lock);
162
163 if (IS_KA(addr))
164 addr = KA2PA(addr);
165
166 /*
167 * Check if addr belongs to z.
168 */
169 if ((addr >= z->base) && (addr <= z->base + (z->free_count + z->busy_count) * FRAME_SIZE)) {
170 zone = z;
171 break;
172 }
173 spinlock_unlock(&z->lock);
174 }
175
176 ASSERT(zone != NULL);
177
178 frame = &zone->frames[(addr - zone->base)/FRAME_SIZE];
179 ASSERT(frame->refcount);
180
181 if (!--frame->refcount) {
182 list_append(&frame->link, &zone->free_head); /* append frame to free_head */
183 zone->free_count++;
184 zone->busy_count--;
185 }
186
187 spinlock_unlock(&zone->lock);
188
189 spinlock_unlock(&zone_head_lock);
190 interrupts_restore(ipl);
191}
192
193/** Mark frame not free.
194 *
195 * Find respective frame structrue for supplied addr.
196 * Increment frame reference count and remove the frame structure from free list.
197 *
198 * @param addr Address of the frame to be marked. It must be a multiple of FRAME_SIZE.
199 */
200void frame_not_free(__address addr)
201{
202 ipl_t ipl;
203 link_t *cur;
204 zone_t *z;
205 zone_t *zone = NULL;
206 frame_t *frame;
207
208 ASSERT(addr % FRAME_SIZE == 0);
209
210 ipl = interrupts_disable();
211 spinlock_lock(&zone_head_lock);
212
213 /*
214 * First, find host frame zone for addr.
215 */
216 for (cur = zone_head.next; cur != &zone_head; cur = cur->next) {
217 z = list_get_instance(cur, zone_t, link);
218
219 spinlock_lock(&z->lock);
220
221 if (IS_KA(addr))
222 addr = KA2PA(addr);
223
224 /*
225 * Check if addr belongs to z.
226 */
227 if ((addr >= z->base) && (addr <= z->base + (z->free_count + z->busy_count) * FRAME_SIZE)) {
228 zone = z;
229 break;
230 }
231 spinlock_unlock(&z->lock);
232 }
233
234 ASSERT(zone != NULL);
235
236 frame = &zone->frames[(addr - zone->base)/FRAME_SIZE];
237
238 if (!frame->refcount) {
239 frame->refcount++;
240
241 list_remove(&frame->link); /* remove frame from free_head */
242 zone->free_count--;
243 zone->busy_count++;
244 }
245
246 spinlock_unlock(&zone->lock);
247
248 spinlock_unlock(&zone_head_lock);
249 interrupts_restore(ipl);
250}
251
252/** Mark frame region not free.
253 *
254 * Mark frame region not free.
255 *
256 * @param start First address.
257 * @param stop Last address.
258 */
259void frame_region_not_free(__address start, __address stop)
260{
261 __address a;
262
263 start /= FRAME_SIZE;
264 stop /= FRAME_SIZE;
265 for (a = start; a <= stop; a++)
266 frame_not_free(a * FRAME_SIZE);
267}
268
269
270/** Initialize zonekeeping
271 *
272 * Initialize zonekeeping.
273 */
274void zone_init(void)
275{
276 spinlock_initialize(&zone_head_lock);
277 list_initialize(&zone_head);
278}
279
280/** Create frame zone
281 *
282 * Create new frame zone.
283 *
284 * @param start Physical address of the first frame within the zone.
285 * @param size Size of the zone. Must be a multiple of FRAME_SIZE.
286 * @param flags Zone flags.
287 *
288 * @return Initialized zone.
289 */
290zone_t *zone_create(__address start, size_t size, int flags)
291{
292 zone_t *z;
293 count_t cnt;
294 int i;
295
296 ASSERT(start % FRAME_SIZE == 0);
297 ASSERT(size % FRAME_SIZE == 0);
298
299 cnt = size / FRAME_SIZE;
300
301 z = (zone_t *) early_malloc(sizeof(zone_t));
302 if (z) {
303 link_initialize(&z->link);
304 spinlock_initialize(&z->lock);
305
306 z->base = start;
307 z->flags = flags;
308
309 z->free_count = cnt;
310 list_initialize(&z->free_head);
311
312 z->busy_count = 0;
313
314 z->frames = (frame_t *) early_malloc(cnt * sizeof(frame_t));
315 if (!z->frames) {
316 early_free(z);
317 return NULL;
318 }
319
320 for (i = 0; i<cnt; i++) {
321 frame_initialize(&z->frames[i], z);
322 list_append(&z->frames[i].link, &z->free_head);
323 }
324
325 }
326
327 return z;
328}
329
330/** Attach frame zone
331 *
332 * Attach frame zone to zone list.
333 *
334 * @param zone Zone to be attached.
335 */
336void zone_attach(zone_t *zone)
337{
338 ipl_t ipl;
339
340 ipl = interrupts_disable();
341 spinlock_lock(&zone_head_lock);
342
343 list_append(&zone->link, &zone_head);
344
345 spinlock_unlock(&zone_head_lock);
346 interrupts_restore(ipl);
347}
348
349/** Initialize frame structure
350 *
351 * Initialize frame structure.
352 *
353 * @param frame Frame structure to be initialized.
354 * @param zone Host frame zone.
355 */
356void frame_initialize(frame_t *frame, zone_t *zone)
357{
358 frame->refcount = 0;
359 link_initialize(&frame->link);
360}
Note: See TracBrowser for help on using the repository browser.